Laserliner AirBreeze 360 Filter-Set User Guide
- June 8, 2024
- Laserliner
Table of Contents
Laserliner AirBreeze 360 Filter-Set
Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. These documents must be kept in a safe place and passed on together with the product.
Intended use
This filter set is suitable for use with the Laserliner AirBreeze 360 air purifier.
General safety instructions
- Only use filter in accordance with the intended use as defined in the specifications.
- The filter is not a toy.
- Modifications or changes to the filter are not permitted, this will otherwise invalidate the approval and safety specifications.
- Incorrect assembly can result in fire or the risk of a fatal electric shock.
- Do not use in the vicinity of an open fire or in air containing high levels of grease.
- The filter must not be used if damaged.
- Do not subject the filter to any mechanical loading, moisture, excessive temperatures or strong vibrations.
- Avoid moisture and sand as far as possible.
- Use the filter in enclosed spaces only; do not expose to moisture or rain as this may result in electric shock.
- Protect the filter from contamination and damage and store in a dry place.
- Disconnect from the mains before changing the filter or cleaning the device.
- Do not operate the air purifier without a filter.
- The filter must be removed from its packaging before fitting.
- Activated carbon filter
- HEPA13 filter
- Pre-filter
- Filter cover
Changing the filter
-
A flashing Display button (13) indicates the filter is due for replacement.
-
Switch off the air purifier and disconnect from the mains.
-
Remove the filter cover by pulling the tabs on the top (a + b).
-
Remove the pre-filter, the HEPA13 filter, and the activated carbon filter in that order by pulling the tabs (d) provided for this purpose.
-
Remove all packaging from the new filter before installing.
-
Fit the activated carbon filter, HEPA13 filter, and pre-filter (c).
Make sure the pre-filter is firmly seated at all six locking points. -
Refit the filter cover in the lower openings. Push the filter cover carefully forwards into the locking points until is if firmly seated (e).
Technical data (Subject to technical changes without notice. Rev22W28)
- Dimensions (W x H x D) 280 x 390 x 46 mm
- Weight 650 g
EU and UK directives and disposal
This product complies with all necessary standards for the free movement of
goods within the EU – and the UK.
The packaging for this product must be recycled in an environmentally
appropriate manner in accordance with European and UK guidelines for packaging
in order to recover valuable raw materials. The filter elements can usually be
disposed of with household or commercial waste at the end of their service
life.
Further safety and supplementary notices at: https://laserliner.com
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
info@laserliner.com
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com