VIVO MOUNT-E-UP44 Motorized TV Stand with Remote Control Instruction Manual
- June 8, 2024
- Vivo
Table of Contents
VIVO MOUNT-E-UP44 Motorized TV Stand with Remote Control
SKU: MOUNT-E-UP44
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-e-up44
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
- help@vivo-us.com
- www.vivo-us.com
- Chat live with an agent!
- 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the
installation, please call a qualified technician. Check carefully to make sure
there are no missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any purpose that is not
explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting,
incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
-
STEP 1
Prepare the cabinet before installation. Make sure you have at least 50mm of space in the front, top, and both sides of the TV inside of the cabinet. Plug Motorized Column (A) into Control Unit (G).
-
STEP 2
Slide cable for AC Adapter (H) through Adapter Bracket (I). Plug AC Adapter (H) into Control Unit (G). Plug Power Cable (J) into AC Adapter (H).
-
STEP 3
Mount Support Bracket (B) to Motorized Column (A) using M6x12 Screws (S-C) and 4mm Allen Wrench (T-A). -
STEP 4
Assemble Side Brackets (C) to Motorized Leg (A) using M6x12 Screws (S-C) and 4mm Allen Wrench (T-A). -
STEP 5
Secure Lid Support (D) to Side Brackets (C) using M6x12 Screws (S-C) and 4mm Allen Wrench (T-A).
-
STEP 6
Note, pairing the Remote (K) maybe needed to continuer. With the mount plumed in, if the mount will not respond to the remote, please follow the pairing instructions found in the remote control manual before proceeding.
Use Remote (K) to raise Motorized Column (A) to the highest setting. Assemble TV Plate (E) to Support Bracket (B) using M10x20 Bolts (S-D) and M10 Nuts (S-E). Tighten using 6mm Allen Wrench (T-B) and Wrench (T-C).
-
STEP 7
Mark drilling location inside of the cabinet using Motorized Column (A). Using a 3mm (1/8”) drill bit, predrill holes approximately 15mm (0.6”) deep. Secure Motorized Column (A) to the cabinet using ST5.5×16 Screws (S-A) using a Phillips screwdriver.
-
STEP 8
Mark drilling location inside of the cabinet using Control Unit (G) and Adapter Bracket (I). Using a 3mm (1/8”) drill bit, predrill holes approximately 15mm (0.6”) deep. Secure Control Unit (G) using ST4.2×20 Screws (S-B) and Adapter Bracket (I) using ST5.5×16 Screws (S-A) and a Phillips screwdriver.
-
STEP 9
Mark drilling locations on the underside of the cabinet lid using Lid Support (D). Using a 3mm (1/8”) drill bit, predrill holes approximately 15mm (0.6”) deep. Secure the lid to Lid Support (D) using ST5.5×16 Screws (S-A) and a Phillips screwdriver.
-
STEP 10
With the TV face down on a flat surface, secure VESA Brackets (F) to the TV using Screws (M-A through M-E), Washers (M-F) and Spacers (M-G, M-H).
-
STEP 11
Hang VESA Brackets (F) onto TV Plate (E) and secure by tightening security screws on the underside of VESA Brackets (F) using a Phillips screwdriver .
-
STEP 12
Operate mount using Remote (K).
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Motorized TV Stand for 32" to 48" TVs – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>