Laserliner AirBreeze 120 3-in-1 Filter Set Instruction Manual
- June 8, 2024
- Laserliner
Table of Contents
Laserliner AirBreeze 120 3-in-1 Filter Set
Completely read through the operating instructions, the „Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. These documents must be kept in a safe place and passed on together with the product.
Intended use
This filter is suitable for use with the Laserliner AirBreeze 120 air purifier.
General safety instructions
- Only use filter in accordance with the intended use as defined in the specifications.
- The filter is not a toy.
- Modifications or changes to the filter are not permitted, this will otherwise invalidate the approval and safety specifications.
- Incorrect assembly can result in fire or the risk of a fatal electric shock.
- Do not use in the vicinity of an open fire or in air containing high levels of grease.
- The filter must not be used if damaged.
- Do not subject the filter to any mechanical loading, moisture, excessive temperatures or strong vibrations.
- Avoid moisture and sand as far as possible.
- Use the filter in enclosed spaces only; do not expose to moisture or rain as this may result in electric shock.
- Protect the filter from contamination and damage and store in a dry place.
- Disconnect from the mains before changing the filter or cleaning the device.
- Do not operate the air purifier without a filter.
- The filter must be removed from its packaging before fitting.
- Tab
- HEPA13 filter
- Filter cover
Changing the filter
- A flashing Filter reset button indicates the filter is due for replacement.
- Switch off the air purifier and disconnect from the mains.
- Remove the filter cover (3) on the underside of the device by rotating the tab (1) to the left and removing the filter cover.
- Remove the old HEPA13 filter (2) from the device.
- Remove packaging from the new HEPA13 filter.
- Insert the new HEPA13 filter into the device.
- Refit the filter cover onto the device and rotate the tab to the right until it can go no further to fix it in place.
- Press the Filter reset button for 3 seconds until the symbols are all lit and are not flashing.
Technical data (Subject to technical changes without notice. Rev22W28)
- Dimensions (Height / diameter) 153 mm / Ø 175 mm
- Weight 400 g
EU and UK directives and disposal
This product complies with all necessary standards for the free movement of
goods within the EU – and the UK.
The packaging for this product must be recycled in an environmentally
appropriate manner in accordance with European and UK guidelines for packaging
in order to recover valuable raw materials. The filter elements can usually be
disposed of with household or commercial waste at the end of their service
life.
Further safety and supplementary notices at: https://laserliner.com
SERVICE
Umarex GmbH & Co. KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
[email protected]
Umarex GmbH & Co. KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: -333
www.laserliner.com