ZOSI V2.C.06.Z Security Camera Instruction Manual
- June 8, 2024
- ZOSI
Table of Contents
ZOSI V2.C.06.Z Security Camera
Statement
Thank you for purchasing this product. 2OS1 is committed to providing our
customers with a high quality, reliable security solution. 2OS1 cannot assume
responsibility for any consequences resulting from the use thereof.
Before Installation
This product require cabling. It is strongly suggested to test all products and parts before installation and cabling.
lnstallallon Video
https://youtu.be/YUf6wVbK0Wk
Tech Support
Website: www.zositech.com
Email: service@zositech.com
Product Overview
Mounting vour camera
-
Step 1: Separate the O Mounting Plate from f} Dome Base by twisting the Mounting Plate in a counterclockwise motion.
-
Step 2 : Remove the 2 Dome Base
-
Step 3: Remove the O Dome Cover and O Dome .
-
Step 4: Install the O Mounting Plate to the ceiling or wall in the position with the supplied screws.
-
Step 5: Attach the O Dome and 9 Dome Cover to the O Mounting Plate.
-
Step 6: Attach the O Dome Base to the 8 Mounting Plate.then twisting Dome Base in a counterclockwise motion until hear the ” lock” sound.
Positioning the cables
Please note, model shown is for illustration m purposes only.
Troubleshooting
Q: Video Loss appears where the image from my camera should be displaying on my DVR?
- Check the extension cable (power and video) is securely connected to the camera.
- Check the video output from the camera is securely connected to a video input channel on the DVR.
- Check the power from the camera is securely connected to a power supply.
Q: When I view an image from the camera at night I only see a bright spot
and no image?
A: A reflection can be caused in night vision mode if the camera is looking
through a window. At night, the infrared light the camera uses to see in the
dark can ‘bounce back’ off a reflective surface (such as glass, water, spider
webs, some ceramics and so on) and effectively blind the camera. If you want
to see outside, mount the camera outside• we made It weatherproof for a
reason!
Q: The BNC extension cable will not connect to my TV?
A: Many TV’s and monitors do not have a BNC connector but do have an RCA
connector. Connect a BNC to RCA adapter to the end of the extension cable and
then plug into the RCA video input on your TV or monitor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>