AURA Choice Interior Strip Kit Installation Guide
- June 9, 2024
- Aura
Table of Contents
Choice Interior Strip Kit
Installation Guide
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the light strips and ensure wiring has enough length
for control box to be installed in desired location.
Once connected, plug the control box Cigarette Power Adapter into an available
12 volt charging port.
STEP 2
Secure control box in desired location.
But ensure that the protruding IR sensor and Sound sensor are placed in an
direct line of contact with the remote.
Ensure the control box is safely and securely hidden from exposing elements of
moisture.
STEP 3
Thoroughly clean the surface where you plan on mounting the LED strip with
rubbing / isopropyl alcohol. (This part is essential for a firm and long
lasting placement. A dirty surface will prevent the strip from attaching
firmly.)
Tear off the 3M Double-sided tape and firmly press the LED strip to the mounting
area and hold for 3 seconds.
STEP 4
Using the included E-Z Remote, select your desired color or pattern.
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.
