AURA GC5 Mid Tower PC Case Installation Guide
- June 1, 2024
- Aura
Table of Contents
- AURA GC5 Mid Tower PC Case
- Product Information
- Product Usage Instructions
- FAQ
- SPECIFICATIONS
- EXPLODED VIEW PARTS
- ACCESSORY
- SIDE PANEL REMOVAL
- PSU INSTALLATION
- 3.5″ 2.5″ HDD INSTALLATION
- AIR COOLING COMPATIBILITY
- RADIATOR COMPATIBILITY
- I/O PORTS
- I/O CONNECTORS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AURA GC5 Mid Tower PC Case
Product Information
Specifications
- SERIES: GC5
- Product Name: Mid-Tower PC Case
- Case Type: Mid-Tower
- Dimension: L x W x H
- Chassis Dimension: L x W x H
- Motherboard Support: Yes
- Expansion Slots: 7
- Material: Steel, Tempered Glass
- Window: Tempered Glass
- Radiator Support: Yes
- Fan Support: Various sizes supported
- Pre-installed Fans: 120mm RGB Fan
- Drive Bays: HDD, SSD, ODD
- I/O Port: Various ports available
Product Usage Instructions
Side Panel Removal
To remove the side panel, follow the instructions specific to your language provided in the manual.
Motherboard Installation
Lay down the chassis, then install the motherboard in the correct location and secure it with screws as per the manual instructions.
PSU Installation
Place the PSU in the designated location within the case
following the provided guidelines.
3.5 & 2.5 HDD Installation
For 3.5 HDD, align it into the mounting holes and screw in. For 2.5 SSD, align it into the mounting holes and secure with screws.
Air Cooling Compatibility
Ensure proper fan installation with support for top, front, rear cooling fans of various sizes as specified in the manual.
FAQ
Q: Should I install the cooling system bracket before mounting the motherboard?
A: Yes, it is recommended to install the cooling system bracket before mounting the motherboard as per the manual’s note.
SPECIFICATIONS
EXPLODED VIEW PARTS
ACCESSORY
SIDE PANEL REMOVAL
Remove the side panel
Lay down the chassis Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
Place the PSU in proper location
3.5″ 2.5″ HDD INSTALLATION
3.5″ HDD
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
- Top 120 mm x 2
- Front 120 mm x 3
- Rear 120 mm x 1
RADIATOR COMPATIBILITY
- Front 360 mm
- Rear 120 mm
I/O PORTS
- Power Button
- Reset Button
- TEMP Button
- USB3.0
- USB 2.0
- USB 2.0
- Microphone
- Headphone
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
