AURA V1 RV Underglow Waterproof Installation Guide
- May 15, 2024
- Aura
Table of Contents
V1 RV Underglow Waterproof
AURA TM
RV UNDERGLOW
– WITH DOOR ASSIST –
INSTALLATION GUIDE
MAIN COMPONENTS
INSTALLATION
**RECOMMENDATION INSTALLATION LOCATION
**
STEP 1 Decide where to locate the control box and ensure wiring has enough length for light bars to be installed in desired location.
IMPORTANT: The control box must be installed inside the vehicle as it is not waterproof. Avoid installation areas of the engine bay + heated surfaces.
As shown below, connect all the LED bars to the control box with the included extension cables.
AUXILIARY WIRE
HOW TO CONNECT
POWER HARNESS TO
YOUR VEHICLE
Connect the Red wire (+) of power
harness to the vehicle battery’s
positive terminal.
Connect the Black wire (-) of power
harness to the vehicle battery’s
negative terminal or an unpainted
area on your vehicle’s frame.
WARNING
-
Connecting to more than 10 AMP will override the kit and cause early failure,
ensure it is 10 AMP or less!! -
Please ensure that the LED bars or strips/control box/wiring all are mounted
in areas where will not exceed 85℃ or 185℉.
INSTALLATION
STEP 2
Secure Control box in desired
location with Velcro or zip ties.
- CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and securely
hidden from exposing elements of moisture.
STEP 3
Mount brackets to secure the
light bars first. Secure the light
bars using the zip ties to tie all
the wiring away from the moving
components.
IMPORTANT
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!!
TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.
STEP 4 Using the included E-Z Remote, select your desired color or pattern.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified
by OPT7 Lighting will void product warranty.
References
- OPT7 - LED Lighting for Cars, Trucks & Motorcycles – OPT7 Lighting Inc
- AURA Door Assist/AUX Installation Guide