BLUE AURA PS40 Hi-Fi Speakers Instruction Manual
- June 3, 2024
- BLUE AURA
Table of Contents
Please unpack the products carefully and take a moment to read the instructions.
PS40 Hi-Fi Speakers
At the end of the product’s useful life, please dispose of it at appropriate collection points provided in your country.
SPECIFICATIONS:
High Frequency Unit: 1” Soff Dome
Low Frequency Unit: 4” Paper cone
Frequency Range: 45 — 20000Hz
Crossover Frequency Max RMS Power: 12dB/Octave @3.0KHz 50 watts per
channel
Dimensions: H: 245mm W: 145mm D: 205mm
Weight: 3.5Kg each
GENERAL INFORMATION ABOUT CONNECTING YOUR BLUE AURA LOUDSPEAKERS
Always use a good quality loudspeaker connection cable. We recommend cables
with cross-sections of at least 2.5 mm? for lengths up to 3 m and at least 4
mm? for lengths above 3 m.
Always turn off the amplifier or receiver before connecting or disconnecting
loudspeaker cables. Place the loudspeakers in their planned positions and cut
the cables of the right length. The cables for both channels should always be
exactly the same length. Strip 12 — 15 mm of insulation from the ends of the
cables. Twist the ends — this is much better than tinning them with solder —
insert them in the terminals and tighten the terminal screws firmly.
Connect the supplied loudspeaker cable to the terminals on the back of the
PS40 loudspeakers.
Silver to the BLACK ( – ) terminal. Gold fo the RED ( + ) terminal
Connect the other end of each cable to the terminals on the back of your
amplifier
Silver to the BLACK ( – ) terminal. Gold fo the RED ( + ) ferminal
Before turning on the system double-check all your connections and make sure that the terminal screws are tight and that there are no short circuits caused by stray braides of wire— this could cause damage to your amplifier.
LISTENING POSITION
In the ideal configuration the speakers and the listening position should form an equilateral triangle. When the left and right soeakers are the same distance from the listening position their sound arrives at the same time, resulting in a harmonious, natural music reproduction. There should be a clear line of sight between the loudspeakers and the listening position. Any sound absorbing or reflecting obstacles in the path will distort the sound.
MAINTENANCE
The surface is best cleaned with a mild household cleaner. On no account use furniture polish or similar products.
Thank you for purchasing our product.
Please visit our website to get more information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>