AURA Double Row Wheel Well Installation Guide
- June 9, 2024
- Aura
Table of Contents
AURA Double Row Wheel Well Installation Guide
MAIN COMPONENTS
-
DOUBLE-WIDE LIGHT STRIPS
-
MOUNTING KIT
-
AURA CONTROL BOX
-
HAND HELD REMOTE
-
FUSE TAPS
-
EXTENSION WIRES
-
CIGARETTE LIGHTER POWER ADAPTER
-
POWER HARNESS
INSTALLATION
STEP 1
Decide where to locate the light strips and ensure wiring has enough length
for control box to be installed in desired location.
As shown below, connect all light pods to the control box with the included
extension cables.
Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port.\
or connect the positive wire to the fuse tap and connector the open negative
wire to a ground (any metal surface). Then plug the fuse tap into the 10amp
switched fuse.
WARNING: Please ensure that the led strips/control box/wiring all are mounted in areas of the engine bay that will not exceed 85C or 185F.
STEP 2
Secure Control box in desired location with Velcro or zipties.
- CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.
STEP 3
Secure the light strips using the zip ties to tie all the wiring away from the
moving components.
- IMPORTANT:
The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE (not included) or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.
STEP 4
Using the included E-Z Remote, select your desired color or pattern.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
OPTIONAL UPGRADE
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box.
All new AURA Pro Bluetooth is App enabled by a smartphone controller (iOS &
Android Compatible).
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty