AURA OPT7 Double Row Golf Cart Underbody Installation Guide
- June 9, 2024
- Aura
Table of Contents
AURA OPT7 Double Row Golf Cart Underbody
MAIN COMPONENTS
INSTALLATION
STEP 1 Decide where to locate the light strips and ensure wiring has enough length for control box to be installed in desired location.
EXAMPLES
We provide multiple sets of extension wires for you to configure. You can quickly extend them wherever you want to install.
# AUX WIRING FOR A BRAKE LIGHT
This feature will activate when the aux wiring is connected to the trigger
wire for positive(+) wire of brake light.
NOTE The default color is “RED” so that when you apply the brake, it will
also sync with the brake light.
STEP 2
Secure Control box in desired location with Velcro or zipties.
CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely
hidden from exposing elements of moisture.
STEP 3
Secure the light strips using the zip ties to tie all the wiring away from the
moving components.
IMPORTANT: The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.
STEP 4
Using the included E-Z Remote or Keychain Remote to select your desired color
or pattern.
OPTIONAL UPGRADE
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box. All new AURA Pro Bluetooth is App enabled by a smart-phone controller (iOS & Android Compatible).
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.