AURA MY COSMOS Daemon Behavior Monitor Instruction Manual
- June 9, 2024
- Aura
Table of Contents
AURA MY COSMOS Daemon Behavior Monitor
INTRODUCTION
Thank you for choosing MY COSMOS Daemon behavior monitor. Please read this manual carefully before use and keep it safe.
Confirm products and accessories
- Host (1)
- Data line (1)
- Power adapter (1)
- Instruction Manual (1)
- Top mounting bracket (1)
Installation of equipment
The device supports two installation methods:
-
Wall-mount installation
Install the bottom of the device on the wall. It is recommended to install the device at a height of 1.5 meters and the Angle is not tilted.
-
Install the suction top
It is recommended that the device be installed at a corner of the room with a height of 2.7 meters and a 45 degree Angle from the ceiling facing the monitoring area.
Use of equipment
-
Step 1: Network configuration
- Connect the device to the power supply. The indicator blinks blue and green alternately.
- Scan the code and download the APP “MY COSMOS” or search for the mini program “MY COSMOS” on wechat and open the program.
- Follow the instructions to add a device to the family group. The program begins to search for the device.
- Select the Wifi network and enter the password. When the network is configured, the green light of the device blinks.
(APP and mini program QR codes are provided here )
-
Step two: Set up and use
-
After the network distribution is completed, you can set the basic information of the device. Please complete the family group, room, device name and other information, and correctly select the installation method of the device, so that the device can be used normally.
-
Alarm setting: users can choose to fall down to monitor alarm time, add alarm notification personnel, add alarm phone number and other alarm information.
Wechat official account notification: When set to on, the alarm will be pushed through the wechat official account.
Device Offline notification: When set to on, the user will be notified that the device is offline.
User recovery/Rise automatically turn off alarm: When set to on, the device will automatically turn off alarm if the user gets up after falling.
Multi-person situation monitoring and alarm: When set to on, even if there are 2 or more people in the monitoring area, when someone falls, the device will still alarm.
No alarm for a long time: When set to on, when the monitoring area does not monitor the movement of personnel within the set time, the device will alarm the user.
Buzzer: When set to on, the buzzer will ring when the device alarms. -
After the above Settings are completed, the device can be used normally. Users can set the device according to their own needs.
-
Notes
- Please install and set according to this manual, otherwise the equipment may not work properly
- To add multiple devices to a home group, power on one device and then power on a new device for configuration.
- Please do not expose the device to open fire sources (such as lit candles).
- Please do not put the equipment in an overheated environment such as sunlight, fire and other similar conditions
- If the equipment falls, it may be damaged.
- Using a power supply that does not come with the device may cause malfunction or even damage the device.
- If the Wifi signal is faulty, the device will not be able to send alerts.
- Please do not install the device on the wallpaper, as the device may fall and damage the wallpaper
For more tips, please refer to the following wechat public account.
（Qr code of wechat official account is provided here）
Description of device status
device status
|
indicator light
|
buzzer
---|---|---
Start initialization when no network is configured
Initialization is started when the network is not configured
|
Steady blue light
The blue light is long and bright
|
Start initialization when no network is configured
Initiates initialization when the network is configured|
Steady green light
Long green light
|
Waiting for the network to be configured
Waiting to the configure network
|
Alternately flashing blue and green lights
Blue light and green light flickered alternately
|
normal work
proper functioning
|
green light flashing
Flashing green light
|
Call the police
give an alarm
|
Alternately flashing red and green lights
The red and green lights
|
keep ringing
| flickered alternately| Keep on ringing
Equipment failure|
Steady red light
The red light stays on
|
factory reset| The blue light is on for 1 second|
Connection method
- 2.4G WifiData communication 2.4G Wifi
- Dimensions and weight
- Diameter 83mm
- Thickness25mm
- Weight65g
The power supply
- Rated working power 5.0V
- Rated operating current500mA
- peak operating current1.5A
- average power consumption 3.0W
Imaging module
- Technology Millimeter Wave radar imaging
- operating frequency60Ghz
- SOC Rf SOC chip TI IWR6843
- Angle of view120°
Design and specifications are subject to change without prior notice.
Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>