PIXEL G1S RGB Photography Light User Manual
- June 9, 2024
- PIXEL
Table of Contents
PIXEL G1S RGB Photography Light User Manual
Introduction
-
Thank you for purchasing our product.
Gls is a new generation RGB photographic light with an all-aluminum body, which is compact and portable, easy to operate. It not only has 360 colors and adjustable brightness from 0 to 100%, but also has bi-color temperature beads which make the photography more colorful; it can soften and diffuse the light with high-quality, high-lumen and high-indicating beads to show real color. Furthermore. G1s also has: -
12 kinds of common lighting scenes can satisfy every need for the shoot.
-
Built-in high-capacity lithium battery with long battery life.
-
Hot shoe bracket that can help to use the light in multiple directions and angles. G1s is the best choice to be used widely in various situation, such as live broadcast, video, interview, portraits, weddings. macros, creations and etc.
Please read the manual carefully before using the product, and keep this
instruction for future reference.
Warning
- Unplug the charging cable when fully charged.
- When the product is not used for a long time. the battery should be fully charged before using the product again. Otherwise, it can’t be turned on without power.
- In order to extend battery life, it is recommended to do charging upkeep every three months.
- The built-in rechargeable lithium battery has a certain life limit. After using for a certain period of time, the performance will be weakened, which is a normal phenomenon.
COMPONENTS
- HSI REFER
- OLED DISPLAY
- SWITCH
- USB-C CHARGE PORT
- LUMINOUS AREA
- HOT SHOE BRACKET
- HOT SHOE BASE
- COLD SHOE NUT
- SETTING BUTTON
- SIM MULTI FUNCTIONAL BUTTON
- FN MULTI FUNCTIONAL BUTTON
- DIM ADJUSTMENT DIAL
- FN ADJUSTMENT DIAL
- 1/4 INCH SCREW HOLE
Features
- The power of Gis is 12W with 80 warm white bi-color beads and 70 RGB beads.
-
- 7.4V 3200mAh lithium battery, USB-c charging port, support QC3.0 fast charging protocol. When the system detects the fast charging protocol, will automatically select 5v, 9v or 12v to charge. When the adapter is plugged in, the charging battery icon will display the charging process. When the adapter is turned off, the display will light a battery icon to remind you of the charging process. The 5V 2A charging time is approximately 2.5 hours.
- After the temperature of the light rises to an unsafe temperature, The temperature control system will work to protect the light.intervene, and thelEflashing warning will appear in the display, and the light will take action to reduce the power or turn off the light. When the temperature returns to safety, the light will automatically resume normal operation.
- When turning on again, the screen will display the last setting.
MANU BUTTONS
MENU SWITCH SET BUTTON
There are 3 menu interfaces under the SET button. Pressing the SET button cycles the display as follows.
2 FN/DIM Multi-functional Button
- DIM Multi-functional Button
- FN Multi-functional Button @ DIM Adjustment Dial
- FN Adjustment Dial
-
Pressing the FN menu button in any mode cycles through the functions in each mode (as shown below, press the FN multi-function button in the scene modeinterface to freely switch between flash mode. Scene light effect mode, RGB colorful mode and special car model.
-
Adjust the FN dial to select the A \B \C effect in the mode. Each group has 3 modes. (As shown below, cm you can select the A C effect type by adjust the FN dial in flash mode).
Flash Mode : A Flash mode 1 B:Flash mode 2 C: Paparazzi mode
Scene Light Effect Mode : A: Candlelight Simulation B: Screen Simulation C: Breathe Effect
RGB Colorful Mode : A: RGB Low Speed B: RGB Fast Speed C: Flash
SimulationSpecial Vehicle Mode : A Police Vehicle Mode B: Ambulance Mode C: Fire Fighting Truck Mode
-
Press the FN multi-functional button to switch the color gamut and saturation functions.
-
Dial the FN button to cycle through the colors in the 0-360 degrees color gamut.
-
Press the FN multi-functional button to switch the color gamut and saturation functions.
-
Dial the FN button to adjust the color saturation from 0 to 100k.
CCT Mode Interface
Turn the adjustment dial to adjust the color temperature value from 2500K to 8500K.
Brightness Adjustment
Turn the DIM dial in any mode to adjust brightness from 0 to 100%.
Percentage Icon
Displays the brightness in the current mode.
Battery Icon
Each grid represents 20% of power. When the last grid is used up. the battery icon will flash. It will automatically shut down after about 5 minute. Please charge it in time.
Power Switch
Turn on/off the light.
PARAMETER
Model | G1S | Color temperature range | 2500-8500k° |
---|---|---|---|
Power | 12W | Lux | 1500LUX(05M) |
Connector | US8-C SV 9V 12V Qc 3.0 | Utility time | 150 minutes |
Battery capacity | 7.4V 3200mAh | LED life time | 50000 hours |
Adjustable range | 0-100 | Material | Aviation aluminum |
RGB color gamut | 0-360° Full color | Heat dissipation | Metal heat dissipation |
Color rendering index | > 97 | Size | 133.83416mm |
TLCI | >97 | Weight | 450g |
Warrenty will not applicable
- The product or component is out of warranty.
- Cannot provide warranty card or valid proof of purchase.
- Malfunction or damage caused by failure to follow the instructions.
- Malfunction or damage caused by improper handling, dropping, or transportation.
- Malfunction or damage caused by contact or exposure to inappropriate temperatures, solvents, acids, alkalis, water or humidity environment.
- Malfunction or damage caused by users unauthorized repair, disassembly and modification.
- Malfunction or damage caused by force majeure or accident.
- Malfunction or damage caused by other non-quality problems.
Malfunction or damage caused by using other power cord or voltage.
Scratches, discoloration, abrasion and consumption of the product appearance
during use are not covered by the warranty. Our company is not responsible for
any damage or economic loss by improper use.
Warranty Card
Dear users, in order to provide a better service, please carefully fill out
this warranty card after purchasing the product. Please take care of this
warranty card after purchase. This warranty card is an important document for
warranty service. Thank you.
Warranty Terms of Service
- This product is guaranteed for a one-year warranty, including the built-in battery.
- The warranty period starts from the first purchase date of the product, and the purchase date is subject to the registration date of the warranty card when the product is purchased.
- If there is a quality problem and you require the warranty, please post the product with this warranty card and the purchase receipt to the dealer or factory for the repair service. Support email: customer_service@pixelhk.com
USER Information| Model|
---|---|---
Name|
Mobile|
Address|
Date of Purchase|
SELLER Information| Name|
Mobile|
Address|
Date of Selling|
Seal|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>