SW-MOTECH STP.07.176.11001 Slider Set for Front Axle Instruction Manual
- June 4, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH STP.07.176.11001 Slider Set for Front Axle
MOUNTING INSTRUCTIONS
Slider set for the front axle
Thank you for choosing this premium product from SW-MOTECH. Please carefully
read and understand all instructions, safety messages and warnings in this
mounting instruction prior to installation and use of this product to avoid
injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit our webshop for additional information, such as
application charts and PDF mounting instructions. Any other documents that may
be required (e.g. ABE certifications), are also available for download at our
webshop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
SAFETY ALERT SYMBOL
-
This safety alert symbol is used throughout these mounting instructions to warn of the possibility of death, bodily injury or other warnings. The words DANGER,
-
WARNING and CAUTION are used with this safety alert symbol to convey important safety messages and information related to the installation and use of this product. These words along with the safety alert symbol mean:
-
DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury!
-
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury!
-
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury!
-
NOTICE: Important information, but not death or injury related [property damage only)!
-
WARNING: The installation and/or maintenance of this product requires advanced mechanical skills, the proper tools, and a thorough understanding of tool use and torque specifications.
For your own safety, SW-MOTECH recommends having installation and/or maintenance carried out by a qualified and certified motorcycle mechanic. -
WARNING: Should you choose to self-install this product, carefully and completely read all installation and safety instructions before installation and use, and follow all the directions and safety precautions given in the mounting instructions to avoid serious injury or death. Also pay attention to all relevant information in the vehicle manual during intallation and use. IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS OR NEED CLARIFICATION OF ANY INSTRUCTIONS,
DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-MOTECH FOR ASSISTANCE.
- PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included.
- CAUTION: Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the engine/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools and wear always safety glasses and hand protection. Have another person help you.
- MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer specifications or replaced by parts and hardware delivered by SW-MOTECH.
- WARNING: Secure all threads, unless otherwise specified, with medium- strong strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a certified motorcycle workshop!
- FUNCTION CHECK: After installation also make sure that no moving parts are obstructed, and function of the vehicle is not hindered in any way. Cables and hoses must not rub and/or be pinched.
- WARNING: Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all connections and the proper fit of the product. Installed accessories can change driving behavior/stability of the vehicle.
PARTS LIST
READ AND SAVE THESE MOUNTING INSTRUCTIONS
Note All torque measurements specifications: in Use the millimeters. torque b The defined second by vehicle number indicates manufacturer! the total The quantity standard of the torque part in this table delivery. can be No used to as long as it is within the vehicle manufacturer’s specifications.
MOUNTING
- WARNING: Always wear eye and hand protection!
- WARNING: Always use appropriate tools!
- Guide the threaded rod 111 through the front axle mount of your vehicle.
- Then plug the spacers (2] and (31 onto the threaded rod (11. as shown in the drawing.
- WARNING: Pay attention to the centered alignment of the threaded rod (1 )!
- Then mount the shown components with the nuts (41 to the vehicle.
- WARNING: Use liquid thread locker!
- Tighten the nuts 141 as specified.
- Mount the sliders (51 with the nuts (8] on both sides to the threaded rod (1]. Tighten the nuts IB] as specified.
Insert the cover caps (9) on both sides into the openings of the mounted sliders (5) and turn them to their end position.
- WARNING: Make sure that the cover caps (9) fit firmly.
PRODUCT SPECIFIC INFORMATION
& NOTICE: Observe the country-specific regulations concerning vehicle registration/operation as well as TOV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>