JOYTUTUS A3301-00203-BK Wrangler Mirrors Doors Off User Guide
- June 1, 2024
- JOYTUTUS
Table of Contents
JOYTUTUS A3301-00203-BK Wrangler Mirrors Doors Off
Specifications :
- SKU: A3301-00203-BK
- 1 Mirror – Left x1
- 2 Mirror – Right x1
- 3 Short-Support Cylinder x2
- 4 Long-Support Cylinder x2
- 5 Metal Spring Washer M8 x4
- 6 Socket Head Cap Screw M8*L90 x2
- 7 Socket Head Cap Screw M8*L75 x2
- 8 Allen Wrench 4mm x1
- 9 Allen Wrench 6mm x1
Product Information
The product includes left and right mirrors, support cylinders, metal spring washers, socket head cap screws, and fallen wrenches.
Function:
- Mirror – Left
- Mirror – Right
- Short – Support Cylinder
- Long – Support Cylinder
- Metal Spring Washer M8
- Socket Head Cap Screw M8*L90
- Socket Head Cap Screw M8*L75
- Allen Wrench 4mm
- Allen Wrench 6mm
Usage Guidelines
Installation Tips:
- STEP 1 – Passenger Side:
- Remove two original screws.
- STEP 2 – Passenger Side:
- Disassemble the mirror.
- STEP 3 – Passenger Side:
- Assemble the bracket [A] with the support cylinders and screws as indicated.
- STEP 4 – Passenger Side:
- Install the long screw M8L90 and short screw M8L75 as shown.
- STEP 5 – Passenger Side:
- Install the assembly onto the vehicle, starting with tightening the upper screw.
- STEP 6 – Passenger Side:
- Tighten the side screw and then install the left mirror on the bracket using the provided accessories.
- STEP 7:
- Repeat the steps to install the other side mirror.
FAQ
- Q: Where can I get quick responses to my questions?
- A: For any inquiries, visit the Joytutus website at www.joytutus.com or email them at Service@joytutus.com.
IMPORTANT
- Please read the installation instructions carefully before you start.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
PRODUCT INFORMATION
- Mirror – Left: x1
- Mirror – Right: x1
- Short – Support Cylinder: x2
- Long – Support Cylinder :x2
- Metal Spring Washer M8: x4
- *Socket Head Cap Screw M8L90:** x2
- *Socket Head Cap Screw M8L75:** x2
- Allen Wrench 4mm :x1
- Allen Wrench 6mm: x1
FUNCTION
INSTALLATION TIPS
- Remove two original screws.
- Disassemble the mirror.
- Assemble the bracket [A] with the [3,5,6] and [4,5,7].
- Install the assembly from step 3 onto the vehicle, first, tighten the upper screw [6].
- Then tighten the side screw [7].
- Install the left mirror [1] on the bracket [A] with the screw [B], metal spring washer [C] and spacer [D].
- Repeat steps to install the other side.
If you have any questions, please go to the Joytutus website or email for a quick response.
- Web : www.joytutus.com
- Email: Service@joytutus.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>