prophete 1026321-22-2023 Bicycle Helmets Instruction Manual

prophete 1026321-22-2023 Bicycle Helmets Instruction Manual

Product information

This product is a bicycle helmet that has passed EN 1078:2012+A1:2012 to demonstrate compliance with EU regulation 2016/425. It is designed to provide optimal protection while cycling.

Product usage instructions

To ensure optimal protection, follow these steps to fit the helmet:

1. Make sure the helmet fits properly for optimal protection.
2. Make sure one strap goes in front of your ear and one strap goes behind your ear.
3. Press the lock to secure the chinstrap in place.

If your helmet comes with a remote control, follow these steps to use it:

1. Charge the helmet with the USB cable and remove the plastic insulator from the remote control battery.
2. Attach the remote control to the helmet.
3. Connect the remote control to the helmet by following the instructions.
4. Use the remote control to turn the lights on/off, activate turn signals or switch to standby mode.

For maintenance and care:

• Check the user manual and keep it in a safe place together with the purchase receipt.
• Follow the correct disposal guidelines when disposing of the product.

Please read these operating instructions carefully before using the bike helmet to ensure proper use and avoid damage or injury.

IMPORTANT NOTES

Please read these operating instructions carefully before first use. You will become familiar with your bike helmet faster this way and can avoid incorrect operation that could lead to damage or injury. Above all, consider the note for safety and danger.
These operating instructions contain function descriptions that apply to different models and equipment versions. Not all components or features described are available on your model. No legal claim to such parts or functions results from this.

MARKING OF IMPORTANT NOTES

Particularly important notes are marked in these operating instructions as follows:

• This warning notice informs you about possible dangers not only to your own health and life, but also to that of other persons, arising from the use of the bicycle helmet.
• This warning notice provides you with important details about the proper handling of your bicycle helmet.

GENERAL NOTES

• This helmet is only intended for use with bicycles, skateboards and roller skates, and not for: mopeds, scooters and motorcycles.
• Always make sure children take off their helmets before entering children’s playgrounds. This helmet must not be worn while climbing or during other activities with a risk of strangulation or entrapment.

Helmet with remote control:
control of the turn does not replace a manual hand signal!

• This bicycle helmet meets high safety requirements. However, it cannot prevent all types of injury.
• The helmet is tested and approved in accordance with the following safety standards (among others):
  EN 1078 Helmet for pedal cyclists and for users of skateboards and roller skates

COMPONENT DESIGNATION

For a better understanding, we would like to inform you in advance about the parts of the bicycle helmet.

THE PARTIES

ADJUSTING THE HELMET

Optimal protection can only be achieved through an optimal fit.
If the helmet does not adapt optimally to your head shape, please choose another size or another model.

OUTSIDE OF THE HELMET
The helmet should fit the head well and should be worn horizontally. It must not be placed on the back of the head, but also not pulled too far over the forehead. It should not be shifted left or right.

It is important that the rim of the helmet is about two finger widths above the bridge of the nose.

Adjusting the head ring (depending on the MODEL)
Check for a tight fit by gently shaking your head with the chin strap. If the helmet is slightly displaced, the adjustment ring (1) must be tightened.

This is done by using the dial switch (2). Turning to the right decreases the circumference of the band and turning to the left increases it.

**Adjusting the straps (depending on the model)

**

In the event of a fall, the helmet will protect your head optimally only if the straps are adjusted correctly and closed firmly.
Note that the straps must not cover your ears and that the closure of the chin strap must not rest on your chin.
One strap must run in front (and the other behind) the ear.

1. The front straps should be vertical, and the rear straps should be at an angle to the ear. Both bands form a triangle around the ear on both sides.

2. To tighten or loosen the straps, open the strap parts and slide them up or down. Then fix the belt parts again.

3. If necessary, the horizontal position of the straps can be adjusted. To do this, part of the tape must be pulled through the entire support system. The protruding part must then be pulled out at the chinstrap closure
   .

4. The chin strap closure must then be closed. This should be centered under your chin. Tighten the chin belt by pulling the two belt ends A + B. You should leave a finger space wide to get enough air. To open the chinstrap, press both sides of the closure with one hand at the same time.

Check the fit periodically to make sure the straps are not loose and the helmet is in the best position.

BELT WITH MAGNETIC CLOSURE (FIDLOCK)
The magnetic closure of the belt is closed (LOCKED) or re-leased (UNLOCKED) as follows:

HELMET WITH REMOTE CONTROL

INITIAL OPERATION
Charge the helmet with the USB cable and remove the plastic insulator from the remote control battery.

Attaching the remote control
Attach the remote control 01 to the handlebar with the silicone ring 05. Place the ring 05 on the lower holder of the remote control and pull it around the bicycle handlebar to the top holder of the remote control.

REMOTE CONTROL WITH HELMET CONNECTION
The remote control must be connected to the helmet before first use:

1. Press the helmet button 07 for approx. 3 sec. (Helmet LEDs 06 light up)
2. Press the helmet button 07 once briefly (helmet LEDs 06 flash)
3. Press the display keys 04 L + 03 R simultaneously. (flashing keys)
4. Press the helmet button 07 twice briefly.(Clear key and helmet LEDs) Remote control and helmet are now paired.

OPERATION

LED LIGHTING

LIGHTING ON (depending on the MODEL)
By pressing the On/Off button, you can turn the lighting on or off.

VERSION 1 –  LED UNIT INTEGRATED IN HELMET SHELL

VERSION 2 –  LED UNIT INTEGRATED IN HELMET SHELL

LED UNIT INTEGRATED IN HEAD RING

CHANGING THE BATTERIES (depending on the model)
Different battery types: CR2032 or CR1620

VERSION 1 –  LED UNIT INTEGRATED IN HELMET SHELL
The LED unit is released from the helmet shell by applying light pressure to the small lever inside the helmet. The batteries are replaced as shown.

VERSION 2 –  LED UNIT INTEGRATED IN HELMET SHELL
The LED unit is released from the helmet shell. The batteries are replaced as shown.

VERSION 3 –  LED UNIT INTEGRATED IN HELMET SHELL

VERSION 4 –  LED UNIT INTEGRATED IN HELMET SHELL

LED UNIT INTEGRATED IN HEAD RING

USB charging station
Models with a USB charging socket can be charged with a Micro USB 2.0 charging cable. As soon as the charging LED stops flashing, the charging process is complete.

MAINTENANCE | CARE

• The helmet should be checked regularly for visible damage.
• After a serious fall, the helmet must be replaced, even if no damage can be found.
• Bicycle helmets should be replaced with new ones after 5-6 years, because material fatigue prevents optimal protection.
• Only drive with the belt closed.
• The earpieces of the glasses should be above the straps at all times – in the event of a fall, the glasses can fall away and thus avoid injuries to the eyes.
• The helmet must not be painted or glued on. The paint or glue may contain components that reduce the stability of the helmet and thus its protective effect.
• No changes nst not be exposed to temperatures above 60 °C, as it loses its protective properties. Please do not keep the helmet near radiators or in the sun behind glass, eg in the car.
• • The helmet shell, the removable pads and the adjustment ring as well as the straps can be cleaned with lukewarm water and a mild soapy solution. The pads and adjustment ring can be removed from the helmet for this. The inside of the helmet should then be positioned with care and the fit and proper seat of the helmet should be checked. Do not use solvents, such as thinners or similar, for cleaning.

WARRANTY

We offer a 2 year warranty for this bike helmet.
The warranty period starts from the date of purchase (purchase receipt, purchase voucher). Please send complaints in relation to defective bicycle helmets during the warranty period to your dealer or to the indicated service address. During this time, we will repair any defects due to material or functional defects free of charge. The warranty does not include batteries, improper handling, falls, impacts and the like. Repair or replacement of the helmet should not start a new warranty period. The warranty period of 2 years from the date of purchase remains decisive.
Prophete GmbH u. co. KG Registered office: Germany Lindenstraße 50 Web: www.prophete.de D-33378 Rheda-Wiedenbrück

• Keep the operating instructions and the purchase receipt in a safe place.

UNDERSTANDING

The product can be disposed of with household waste (residual waste) if it does not contain electronic components (eg lighting system). At the end of its life, a product with electronic components, on the other hand, must not be disposed of with normal household waste. Instead, it must be deposited at a collection point for the recycling of electrical and electronic equipment. In this case, the rechargeable battery or battery must be removed from the article in advance and disposed of separately. The materials are recyclable according to their identification. Ask the city/municipality where your local waste disposal center is located.

EC DECLARATION OF CONFORMITY

You can find the EU declaration of conformity on our homepage: www.prophete.de “

Prophete GmbH u. co. KG
Postfach 2124 • 33349 Rheda-Wiedenbrück
Lindenstraße 50 • 33378 Rheda-Wiedenbrück
www.prophete.de
Reprinting prohibited. Status 09/2022

Read More About This Manual & Download PDF:

References

• Fahrräder, E-Bikes, Fahrradzubehör uvm. | Prophete
• Fahrräder, E-Bikes, Fahrradzubehör uvm. | Prophete

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>