BEMKO JAG-050 LED Light Instruction Manual

June 4, 2024
BEMKO

BEMKO JAG-050 LED Light

Installation instructions

BEMKO-JAG-050-LED-Light -01

Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with Your Local Authority or retailer for recycling advice.

BEMKO-JAG-050-LED-Light -05

  1. Rated voltage, frequency, power factor.
  2. Power, luminous Flux.
  3. Color temperature, colour rendering index.
  4. Appliance classes.
  5. Lifetime.
  6. International Protection Rating.
  7. Protection against mechanical impacts.
  8. Caution, risk of electric shock.
  9. It does not work with a dimmer.
  10. For internal/external use.
  11. Replace the defective lamp cover immediately.
  12. Angle of illumination.
  13. It does not work with cross and stairs connectors.
  14. The minimum distance from the illuminated object.
  15. Working temperature.
  16. ON/OFF cycles

Security
Before mounting, read the instructions and disconnect the power supply. Installation of the luminaire should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. Modifications to the product may cause threat and loss of warranty.

Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness / humidity, water, explosive zones, vibrations, chemical fumes.

Recommendations
Failure to follow the instructions in the manual may result in a fire, electric shock, burns or other damage. Bemko sp. O.o. is not responsible for failure to comply with the above recommendations. We also reserve the right to make changes to the manual – the current version is available at www.bemko.eu.

The light source of this luminaire is unchangeable. When the source of light is damaged, whole fixture should be replaced.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals