BEMKO PSF711-124-MD Led Celling Lamp Instruction Manual

October 30, 2023
BEMKO

**BEMKO PSF711-124-MD Led Celling Lamp Instruction Manual

**

Installation Instructions

Installation Instructions

Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions

Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with Your Local Authorityor retailer for recycling advice.

  1. Rated voltage, frequency, power factor.
  2. Power, luminous flux.
  3. Color temperature, colour rendering index.
  4. Appliance classes.
  5. ON/OFF cycles.
  6. Lifetime.
  7. International Protection Rating.
  8. Protection against mechanical impacts.
  9. Caution, risk of electric shock.
  10. It does not work with a dimmer. 11. For internal/external use.
  11. Replace the defective lamp cover immediately.
  12. Angle of illumination
  13. It does not work with cross and stairs connectors.
  14. The minimum distance from the illuminated object.
  15. Working temperature.
    Symbols
    Symbols

ul. Bocznicowa
13 05-850 Jawczyce
www.bemko.eu

Security
Before mounting, read the instructions and disconnect the power supply. Installation of the luminaire should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. The cables should be isolated in accordance with the drawings – around 8mm. Modifications to the product may cause threat and loss of warranty

Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. In order to extend the product life after max. 10 hours of continuous operation, it is recommended to switch it off to min. 2h. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness / humidity, water, explosive zones, vibrations, chemical fumes.

Recommendations
Failure to follow the instructions in the manual may result in a fire, electric shock, burns or other damage. Bemko sp. O.o. is not responsible for failure to comply with the above recommendations. We also reserve the right to make changes to the manual – the current version is available at www.bemko.eu

The light source of this luminaire is unchangeable. When the source of light is damaged, whole fixture should be replaced.

EU DECLARATION OF CONFORMITY

  • Manufactorer: Bemko Sp z o.o.
  • Adress: ul. Bocznicowa 1305-850 Jawczyce
  • hereby declare, that product:

LED Celling Lamp PSF711-124-MD, PSF711-304-MD, PSF712-304-MD,

Is in compliance with the following directives / regulations:

2014/53/EU| of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
---|---
2011/65/EU| of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
2009/125/EC| of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products
1194/2012| of 12 December 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment
874/2012| of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires

For evaluation below standards/technical documentation were used:

EN 60598-1:2015
Luminaires. General requirements and tests

EN 60598-2-1:1989
Luminaires. Particular requirements. Specification for fixed general purpose luminaired

EN 62471:2008
Photobiological safety of lamps and lamp systems

ETSI EN 300 440 V2.2.1:2018
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard for access to radio spectrum

ETSI EN 301 489-1 V2.1.1:2017
Technical requirements — Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU

EN 62493:2015
Assessment of lighting equipment related to human exposure to electromagnetic fields

EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances (IEC 63000:2016)

Warsaw 16.04.2020

Name, surname and function of the authorized person to issue a declaration of conformity
Signaguer Icon

BEMKO Sp. z o.o.
ul. Bocznicowa 13 05-850 Jawczyce tel. 0 22 732 11 85 www.bemko.eu tel./fax: 0 22 732 11 86 Sąd Rejonowy dla m.st. Warszawy w Warszawie, Wysokość kapitału zakładowego – 50.000,00 złotych XIII Wydział Gospodarczy Krajowego Rejestru Sądowego sIedziba kraj: Polska, woj. Mazowieckie, m.st. Warszawa, gmina m.st. Warszawa, miejscowość Warszawa KRS – 0000278651, NIP – 118-18-84-396, REGON – 140893162 Konto Santander Bank Polska S.A. Nr Rachunku: 81 1910 1048 2787 8320 2675 0001

Symbols

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals