BEMKO C38-ST41-154-PIR Ceiling Lamp Instruction Manual

June 6, 2024
BEMKO

USER MANUAL
TAWAN

Installation instructions

BEMKO C38-ST41 154 PIR Ceiling Lamp

Produced after 13th August 2005. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with Your Local Authority or retailer for recycling advice.   BEMKO C38-ST41
154 PIR Ceiling Lamp - fig1

  1. Rated voltage, frequency, power factor.
  2. Power, luminous flux.
  3. Color temperature, color rendering index.
  4. Appliance classes.
  5. ON/OFF cycles.
  6. Lifetime.
  7. International Protection Rating.
  8. Protection against mechanical impacts.
  9. Caution, risk of electric shock.
  10. It does not work with a dimmer.
  11. For internal/external use.
  12. Replace the defective lamp cover immediately.
  13. The angle of illumination.
  14. It does not work with cross and stairs connectors.
  15. The minimum distance from the illuminated object
  16. Working temperature.
  17. Maximum working time.

USER MANUAL LED GELLING LAMP ST41-104/154-PIR

Security

Before mounting, read the instructions and disconnect the power supply. Installation of the luminaire should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. The cables should be isolated in accordance with the drawings – around 8mm. Modifications to the product may cause threats and loss of warranty.
Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. In order to extend the product life after max. 10 hours of continuous operation, it is recommended to switch it off to min. 2h. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness/humidity, water, explosive zones, vibrations, chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire, electric shock, burns, or other damage. Bemko sp. 0.o. is not responsible for the failure to comply with the above recommendations. We also reserve the right to make changes to the manual – the current version is available at www.bemko.eu.
The light source of this luminaire is unchangeable. When the source of light is damaged, the whole fixture should be replaced.

ul. Bocznicowa 13
05-850 Jawczyce
www. bemko.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals