Bemko LOPER 2 Led Parking Lot Lighting Instruction Manual
- May 15, 2024
- BEMKO
Table of Contents
Bemko LOPER 2 Led Parking Lot Lighting
Specifications
- Model: LOPER 2 (LOP2-050/100/150BL-4K)
- Rated Voltage: 230V~
- Frequency: 50Hz
- Power Factor: DF>0.95
- Luminous Flux: Pon: 50W – 6000lm, Pon: 100W – 12000lm, Pon: 150W – 18000lm
- Color Temperature: 4000K
- Color Rendering Index (CRI): 70
- IP Rating: IP65
- Mechanical Impact Rating: IK07
- Lifetime: 25000h
Product Usage Instructions
Installation Follow the provided guidelines for installation. Ensure the product is mounted securely and in accordance with safety standards.
Powering On Connect the product to a compatible power source with the specified voltage and frequency.
Maintenance Regularly check for any signs of damage or wear. Replace any defective components immediately.
Cleaning Clean the product using a soft, dry cloth. Avoid using harsh chemicals that may damage the surface.
Environmental Considerations Ensure the product is used in the recommended indoor or outdoor environments as specified.
FAQ
Q: Can the product be used with a dimmer? A: No, the product does not work with a dimmer. Q: What is the maximum working time of the product? A: The maximum working time is specified as 25000 hours. Q: Is the product suitable for external use? A: Yes, the product is rated for both internal and external use. Q: How should I clean the product? A: Use a soft, dry cloth for cleaning. Avoid harsh chemicals.
Installation instructions
Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with Your Local Authorityor retailer for recycling advice.
SPECIFICATION
- Rated voltage, frequency, power factor.
- Power, luminous flux.
- Color temperature, colour rendering index.
- Appliance classes.
- Lifetime.
- International Protection Rating.
- Protection against mechanical impacts.
- Caution, risk of electric shock.
- It does not work with a dimmer.
- For internal/external use.
- Replace the defective lamp cover immediately.
- Angle of illumination.
- It does not work with cross and stairs connectors.
- The minimum distance from the illuminated object.
- Working temperature.
- Maximum working time.
Security
Before mounting, read the instructions and disconnect the power supply. Installation of the luminaire should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, by the mounting diagram. Modifications to the product may cause threat and loss of warranty.
Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. Product not adapted to work in an environment with unfavourable conditions, i.e. high dustiness/humidity, water, explosive zones, vibrations, and chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire,
electric shock, burns or other damage. Bemko sp. O.o. is not responsible for
failure to comply with the above recommendations. We also reserve the right
to make changes to the manual – the current version is available at
www.bemko.eu.
The light source of this luminaire is unchangeable. When the source of light
is damaged, whole fixture should be replaced.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>