BEMKO C93-GLR-3ZP-MT3H Galer Surface Emergency Luminaire Instruction Manual
- June 5, 2024
- BEMKO
Table of Contents
BEMKO C93-GLR-3ZP-MT3H Galer Surface Emergency Luminaire
Installation instructions
Waste electrical products should not be disposed with household
waste. Please recycle where facilities exist. Check with Your Local
Authorityor retailer for recycling advice.
Dimensions
Features
-
Rated voltage, frequency.
-
Power, luminous flux.
-
Color temperature, colour rendering index.
-
Appliance classes.
-
Operating Mode:
-M: network-emergency operation
– NM: emergency work -
Testing function: MT (manual test)
-
International Protection Rating.
-
Emergency work time.
-
Caution, risk of electric shock.
-
Battery.
-
It does not work with a dimmer.
-
Replace the defective lamp cover immediately.
-
The minimum distance from the illuminated object.
-
Working temperature.
GLR-ZMP
Additional Information:
Steady LED indicates the connection of the luminaire to the power source and
the battery charge status. Pressing the TEST button switches the fitting into
emergency power mode, after releasing the button the fitting returns to the
previous mode. During installation, connect the battery plug to the PCB
(according to figure 3), Write the date of luminaire installation on the
battery label.
It is recommended to replace the batteries at least every 4 years.
Security
Before mounting, read the instructions and disconnect the power supply. Installation of the luminaire should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. Modifications to the product may cause threat and loss of warranty.
Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness / humidity, water, explosive zones, vibrations, chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire,
electric shock, burns or other damage. Bemko sp. O.o. is not responsible for
failure to comply with the above recommendations. We also reserve the right to
make changes to he manual – the current version is available at
www.bemko.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>