BEMKO ST72-140G-MS Ceiling Lamp with Microwave Motion Sensor Instruction Manual
- June 9, 2024
- BEMKO
Table of Contents
BEMKO ST72-140G-MS Ceiling Lamp with Microwave Motion Sensor
Installation instructions
DIMENSION
ST72-140G-MS
ST72-125P-MS
Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with Your Local Authorityor retailer for recycling advice.
FEATURES
- Rated voltage, and frequency.
- Power
- Appliance classes.
- International Protection Rating.
- Protection against mechanical impacts.
- Caution, risk of electric shock.
- It does not work with a dimmer.
- For internal/external use.
- Replace the defective lamp cover immediately.
- The angle of illumination.
- It does not work with cross and stairs connectors.
- The minimum distance from the illuminated object.
- Working temperature.
- Maximum working time.
Security
Before mounting, read the instructions and disconnect the power supply. Installation of the luminaire should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, in accordance with the mounting diagram. The cables should be isolated in accordance with the drawings around 8mm. Modifications to the product may cause threat and loss of warranty.
Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. In order to extend the product life after max. 10 hours of continuous operation, it is recommended to switch it off to min. 2h. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness/humidity, water, explosive zones, vibrations, and chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire, electric shock, burns or other damage. Bemko sp. O.o. is not responsible for failure to comply with the above recommendations. We also reserve the right to make changes to the manual – the current version is available at www.bemko.eu.
EU DECLARATION OF CONFORMITY
Celling Lamp with microwave motion sensor
- ST72-140G-MS, ST72-125P-MS
Is in compliance with the following directives/ regulations
2014/35/EU| of 26 February 2014 on the harmonization of the laws of the Member
States relating to the making available on the market of electrical equipment
designed for use within certain voltage limits
---|---
2014/53/EU| of 16 April 2014 on the harmonization of the laws of the Member
States relating to the making available on the market of radio equipment and
repealing Directive 1999/5/EC
2011/65/EU| of 8 June 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
874/2012 ………….of 12 July 2012 supplementing Directive 2010/30/EU of the
European Parliament and of the Council with regard to energy labeling of
electrical lamps and luminaires
For evaluation below standards/technical documentation were used
Warsaw 14.05.2019
Name, surname and function of the authorized person to issue a declaration of conformity.
BEMKO Sp. z o.o.
- ul. Bocznicowa 13 05-850 Jawczyce
- Tel: 0 22 732 11 85
- www.bemko.eu
- Tel./fax: 0 22 732 11 86