LEDYi LY378-SECOBW30-W24 Side Emitting COB LED Strip User Guide
- June 9, 2024
- LEDYI
Table of Contents
LEDYi LY378-SECOBW30-W24 Side Emitting COB LED Strip
Description
Side emitting cob led strip, dotless, no hot spot. 24V, Step length: 55.55mm with 3M adhesive tape on the back for easy installed. 400lm/m at 10W/m. 120° beam angle. Very good color reproduction with CRI>90
Dimensions & Waterproof
Product Specification
| Dimension | 5000x10x2.5mm |
|---|---|
| Chip Type | COB |
| Chips/m | 378pcs |
| Step LEDs | 21pcs |
| Step Length | 55.55mm |
| Voltage(V) | DC24V |
|---|---|
| Current(A/m) | 0.42A |
| Power(W/m) | 10W |
| Beam Angle | 120° |
| Operation Temperature | -20°C~50°C |
Product Photometrics (Data base on IP20 CRI >90)
CCT
(K)
| Lumen
(lm/m)
| Efficacy
(lm/w)
| ****
CRI
| ****
R9
| Rf
(Fidelity)
| Rg
(Gamut)
---|---|---|---|---|---|---
2630-2850| 300| 30| 90| 50| 90| 99
2790-3090| 340| 34| 90| 50| 92| 100
3780-4280| 380| 38| 90| 50| 94| 101
5970-6970| 400| 40| 90| 50| 93| 101
Light Distribution Curve
Packing Information
Precautions for use
- To protect the LED light strip, do not hit the light-emitting area with hard things.
- After unpacking, please use in 24H to avoid the oxidation effect of solder joints.
- Avoid direct contact with high temperature objects in the light-emitting area of the lamp, and the instantaneous contact temperature of the surface of the light-emitting area should be less than 210 °C.
- The soldering iron temperature should be less than 300° during soldering, and the soldering time of single solder should be controlled within 3s.
- It is strictly forbidden to twist the lamp with short distance. The single lamp strip (0.5 m) has a maximum twist angle of 720°.
- The bend diameter at any position needs to be greater than 1cm.
Web: www.ledyi.com
Mail: [email protected]
Tel.: +86 0755 2302 5890
Copyright©2022 LEDYI LIGHTING CO., LIMITED | All Rights Reserved
Read User Manual Online (PDF format)
Loading......