LEDYi Lighting EV4-X 4-Channel Constant Voltage Power Repeater User Manual
- June 4, 2024
- LEDYI Lighting
Table of Contents
LEDYi Lighting EV4-X 4-Channel Constant Voltage Power Repeater User Manual
Features
- 12-24V constant voltage power repeater.
- 4 channel, 8A per channel.
- To receive PWM signal control.
- Power repeater in series or in parallel to expand output unlimitedly.
- Apply to single color, dual color, RGB or RGBW constant voltage LED strip or module.
Technical Parameters
Input and Output
Input and Output
Input voltage| 12-24VDC
Input current| 32.5A
Input signal| PWM
Output voltage| 4 x (12-24)VDC
Output current| 4CH,8A/CH
Output power| 4 x (96-192)W
Output type| Constant voltage
Environment
| Operation temperature | Ta: -30 C ~ +55C |
|---|---|
| Case temperature (Max.) | T c:+85 C |
| IP rating | IP20 |
Safety and EMC
Safety and EMC
EMC standard (EMC)
| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD
Warranty and Protection
Warranty and Protection
Warranty| 5 years
Protection| Reverse Polarity
Weight
Weight
Net weight| 0.267kg
Gross weight| 0.287kg
Mechanical Structures and Installations
Wiring Diagram
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|---|---|---|
| No light | 1. No power. |
2. Wrong connection or insecure.
| 1. Check the power.
2. Check the connection.
Wrong color| 1. Wrong connection of R/G/B/W wires.| 1. Reconnect R/G/B/W
wires.
Uneven intensity between front and rear,with voltage drop| 1. Output cable is
too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
| 1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
Safety & Warnings
- This product is non-waterproof. Please avoid the sun and rain.
- Good heat dissipation will prolong the working life of the controller,Please ensure good ventilation.
- Please check if the output voltage of any power supplies used comply with the working voltage of the product.
- Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
- If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.