lEDYi Lighting RT2 Touch Wheel RF Remote Controller Instruction Manual

lEDYi Lighting RT2 Touch Wheel RF Remote Controller

Touch Wheel RF Remote Controller

Model No.: RT2/RT7

1 and 4 zone CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix

Features

• Apply to dual color(warm white + cool white) LED controller
• Ultra sensitive color adjustment touch wheel.
• Each remote can match one or more receivers.
• AAAx2 battery powered.
• Operate with LED indicator light.
• Magnet on the back which can be stuck on back holder.

Technical Parameters

Input and Output

Output signal| RF(2.4GHz)
Working voltage| 3VDC(AAAx2)
Working current| ＜5mA
Standby current| ＜10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free  space)
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
IP rating| IP20
Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Weight

Net weight| 48 g
Gross weight| 88g

Mechanical Structures and Installations

To FIx the remote, three options are offered for selection: Option 1: stuck the remote on any metal surfaces directly. Option 2: fix the remote’ back holder on the wall with two screws. Option 3: adhere the remote’ back holder to the wall with paster.

Operation

• When turn on light, the indicator display blue. when turn off light, the indicator display red.
• When touch the color wheel, the indicator will display the same color.
• When press or touch operation is invalid (If the light is off), the indicator display red.
• To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.

Match Remote Control (two-match ways)

End-user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single-zone remote) or zone key (multiple zone remote) of the remote.
The LED indicator fast flash a few times
means match is successful.

Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times
means all matched remotes were deleted.

Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single-zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Key function

RT2 1 zone CCT remote

• Turn on/off light.
• Touch to change color temperature.
• Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
• Get warm white or cold white directly.
• 25%, 50%, 75%, 100%
• brightness.Short press recall the scene, ong press 2s save current state into S1/2/3/4. the LED indicator display green when save OK.

RT7 4 zone CCT remote

• Short press turn on/off all zone light.
• Touch to change current zone color temperature
• Short press select and turn on zone light long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously.
• Adjust brightness for currently selected zone, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
• Get warm white or cold white directly for currently selected zone
• Short press recalls the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 4 zone recall or save synchronously.

Safety information

1.  Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery’s positive and negative polarity.
   A long time without the remote control, remove the battery.
   When remote distance becomes smaller and insensitive, replace the battery.

3.  If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5.  For indoor and dry location use only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>