LEDYi Lighting V2-L Dual Color LED Controller Dimming Curve User Manual

LEDYi Lighting V2-L Dual Color LED Controller Dimming Curve

Dual Color LED Controller

Model No.: V2-L

2 Channel/Step-less dimming/Wireless remote control/Auto- transmitting/Synchronize/Push Dim/Multiple protection

Feature

• 4096 levels 0-100% dimming smoothly without any flash.
• Match with all 2.4G single zone or multiple zone dual color or single color remote control.
• One RF controller accept up to 10 remote control.
• Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
• Synchronize on multiple number of controllers.
• Connect with external push switch to achieve on/off and 0-100% dimming function.
• Over-load / Short circuit protection, recover automatically.

Technical Parameters

Input and Output

Input voltage| 12-36VDC
Input current| 16.5A
Output voltage| 2x(12-36)VDC
Output current| 2CH,8A/CH
Output power| 2x(96-288)W
Output type| Constant voltage
Dimming data

Input signal| RF 2.4GHz + Push Dim
Control distance| 30m
Dimming level| 4096 levels
Dimming range| 0 -100%
Dimming curve| Linear
PWM Frequency| 2KHz (default)
Safety and EMC

EMC standard (EMC)| EN301 489,EN 62479
Safety standard(LVD)| EN60950
Safety standard(LVD)| EN300 328
Certification| CE,EMC,LVD,RED
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85 OC
IP rating| IP20
Warranty and Protection

Warranty| 5 years

Protection

| Reverse Polarity Over-load  Short circuit

Mechanical Structures and Installations

Wiring Diagram

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete
Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Application notes

1. All the receivers in the same zone.
   RF remote
   Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be limitless.
   Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote.
   Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.

2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Push Dim with Synchronization

• The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.
• If more than one controller are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%.
• This means there is no need for any additional synchrony wire in larger installations.
• We recommend the number of controllers connected to a push switch does not exceed 25 pieces,
• The maximum length of the wires from push to controller should be no more than 20 meters.

Dual color control

CH1=Warm white LED
CH2=Cool white LED
Each channel can supply up to 192W(@24V) and white balance can be controlled as such:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>