LEDYi Lighting RT8 Touch Wheel RF Remote Controller User Manual
- June 4, 2024
- LEDYI Lighting
Table of Contents
LEDYi Lighting RT8 Touch Wheel RF Remote Controller
Touch Wheel RF Remote Controller
1,4 ,8 zone dimming/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Features
- Apply to single color LED controller.
- Ultra sensitive color adjustment touch wheel.
- Each remote can match one or more receivers.
- AAAx2 battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be stuck on a back holder.
Technical Parameters
Input and Output
Output signal| RF(2.4GHz)
Working voltage| 3VDC(AAAx2)
Working current| ＜5mA
Standby current| ＜10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Weight
Net weight| 48 g
Gross weight| 88g
Mechanical Structures and Installations
To the remote, three options are offered for selection: Option 1: stuck the remote on any metal surface directly. Option 2: fix the remote’ back holder on the wall with two screws. Option 3: adhere the remote’ back holder to the wall with a paster.
Operation
- When turn on light, the indicator display blue. when turn off light, the indicator display red.
- When touch the color wheel, the indicator will display the same color.
- When press or touch operation is invalid (If the light is off), the indicator display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter the sleep state, you need to press any key to make the touch wheel quit sleep state.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered
for selection:
Use the controller’s Match key
Match:
Short press match key, and immediately press on/off key (single zone remote)
or zone key (multiple zone remote) of the remote. The LED indicator fast flash
a few times means match is successful.
Delete:
Press and hold the match key for 5s to delete all match, The LED indicator
fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, and repeat again. An immediately
short press on/off key (single zone remote) or zone key (multiple zone remote)
3 times on the remote. The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again. An immediately short
press on/off key (single zone remote) or zone key (multiple zone remote) 5
times on the remote.The light blinks 5 times means all matched remotes were
deleted.
Key function
- RT1 1 zone dimming remote
- Turn on/off light.
- Touch to change brightness.
- Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
- Small night brightness (10%).
- Turn off light after 30s, long press 2s will turn off light after 60s.
- 25%, 50%, 75%,100% brightness.
- Short press recall the scene, long press 2s save current brightness into S1/2/3/4. the LED indicator display green when save OK.
- RT6 4 zone dimming remote
- Short press turn on/off all zone light.
- Touch to change current zone brightness. : Short press select and turn on zone light, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously.
- 25%, 50%, 75%,100% brightness for current selected zone. : Short press recall the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 4 zone recall or save synchronously.
The remote can be used as 4 zone dimming remote or single-zone 4-channel
dimming remote. On/Off + 4: Long press 2s set as 4 channel dimming remote,
only match with one or multiple receiver of 4 channel, such as V4 or C4
controller. On/Off + 1: Long press 2s set as 4 zone dimming remote, each zone
match with one or multiple receivers.
When set ok, the red indicator will light on longer.
- RT8 8 zone dimming remote
- Short press turn on/off all zone light.
- Touch to change current zone brightness. : Short press select and turn on zone light, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously.
- Short press recall the scene, long press 2s save current state into S1/2/3/4. the LED indicator display green when save OK. 8 zone recall or save synchronously.
Safety information
- Read all instructions carefully before you begin this installation.
- When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
- If no response from the receiver, please re-match the remote.
- Gently handle remote, beware of falling.
- For indoor and dry location use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>