LEDYI S1220T LED Neon Flex Datasheet
- June 4, 2024
- LEDYI
Table of Contents
LEDYI S1220T LED Neon Flex Datasheet
Product specification
White color color parameters
Part Number| CCT| Power| Efficiency| Lumen| Unit
Length| Max Run Length
---|---|---|---|---|---|---
| (K)| (w/m)| (lm/w)| (lm/m)| (mm)| (m)
NS-S1220T-W24| 2350-2550K| 10| 37.4| 374| 50| 17
NS-S1220T-W27| 2600-2800K| 10| 36.5| 365| 50| 17
NS-S1220T-W30| 2850-3150K| 10| 37.0| 370| 50| 17
NS-S1220T-W40| 3800-4200K| 10| 40.7| 407| 50| 17
NS-S1220T-W60| 5600-6100K| 10| 37.8| 378| 50| 17
Single color parameters
Part Number| Color| Power| Efficiency| Lumen| Unit
Length| Max Run Length
---|---|---|---|---|---|---
| (nm)| (w/m)| (lm/w)| (lm/m)| (mm)| (m)
NS-S1220T-R| Red(620-625nm)| 10| 16.9| 169| 50| 18
NS-S1220T-G| Green(515-525nm)| 10| 42.7| 427| 50| 17
NS-S1220T-B| Blue(460-465nm)| 10| 9.8| 98| 50| 17
NS-S1220T-Y| Yellow(585-595nm)| 10| 12.6| 126| 50| 18
NS-S1220T-O| Orange| 10| 16.7| 167| 50| 17
NS-S1220T-P| Pink| 10| 34.6| 346| 50| 17
RGBWRGBW color color parameters parameters(RGB+2400K)(RGB+2400K)
Color| CRI| Power| Efficiency| Lumen| Unit
Length| Max Run Length
---|---|---|---|---|---|---
(nm)| | (w/m)| (lm/w)| (lm/m)| (mm)| (m)
Red| N/A| 2.5| 13.6| 34.0| 83.33| 5
Green| NA/| 2.5| 52.4| 131.0| 83.33| 5
Blue| N/A| 2.5| 11.6| 29.0| 83.33| 5
2400K| >90| 2.5| 42.4| 106.0| 83.33| 5
RGB| N/A| 7.5| 25.7| 193.0| 83.33| 5
RGBW| N/A| 10| 30.0| 300.0| 83.33| 5
RGBWRGBW color color parameters parameters(RGB+2700K)(RGB+2700K)
Color| CRI| Power| Efficiency| Lumen| Unit
Length| Max Run Length
---|---|---|---|---|---|---
(nm)| | (w/m)| (lm/w)| (lm/m)| (mm)| (m)
Red| N/A| 2.5| 14.0| 35| 83.33| 5
Green| NA/| 2.5| 55.2| 138| 83.33| 5
Blue| N/A| 2.5| 12.0| 30| 83.33| 5
2700K| >90| 2.5| 44.4| 111| 83.33| 5
RGB| N/A| 7.5| 26.9| 202| 83.33| 5
RGBW| N/A| 10| 31.4| 314| 83.33| 5
RGBWRGBW color color parameters parameters(RGB+3000K)(RGB+3000K)
Color| CRI| Power| Efficiency| Lumen| Unit
Length| Max Run Length
---|---|---|---|---|---|---
(nm)| | (w/m)| (lm/w)| (lm/m)| (mm)| (m)
Red| N/A| 2.5| 13.6| 34| 83.33| 5
Green| NA/| 2.5| 52.8| 132| 83.33| 5
Blue| N/A| 2.5| 11.6| 29| 83.33| 5
3000K| >90| 2.5| 42.8| 107| 83.33| 5
RGB| N/A| 7.5| 26.0| 195| 83.33| 5
RGBW| N/A| 10| 30.2| 302| 83.33| 5
RGBWRGBW color color parameters parameters(RGB+4000K)(RGB+4000K)
Color| CRI| Power| Efficiency| Lumen| Unit
Length| Max Run Length
---|---|---|---|---|---|---
(nm)| | (w/m)| (lm/w)| (lm/m)| (mm)| (m)
Red| N/A| 2.5| 13.6| 34| 83.33| 5
Green| NA/| 2.5| 53.6| 134| 83.33| 5
Blue| N/A| 2.5| 11.6| 29| 83.33| 5
4000K| >90| 2.5| 46.8| 117| 83.33| 5
RGB| N/A| 7.5| 26.4| 198| 83.33| 5
RGBW| N/A| 10| 31.6| 316| 83.33| 5
RGBWRGBW color color parameters parameters(RGB+6000K)(RGB+6000K)
Color| CRI| Power| Efficiency| Lumen| Unit
Length| Max Run Length
---|---|---|---|---|---|---
(nm)| | (w/m)| (lm/w)| (lm/m)| (mm)| (m)
Red| N/A| 2.5| 12.8| 32| 83.33| 5
Green| NA/| 2.5| 50.8| 127| 83.33| 5
Blue| N/A| 2.5| 11.2| 28| 83.33| 5
6000K| >90| 2.5| 42.4| 106| 83.33| 5
RGB| N/A| 7.5| 24.9| 187| 83.33| 5
RGBW| N/A| 10| 29.5| 295| 83.33| 5
DMX512 RGB / RGBW color parameters
Color| IC Model| Power| Efficiency| Lumen|
Pixel| Unit Length| Max Run Length
---|---|---|---|---|---|---|---
(nm)| | (w/m)| (lm/w)| (lm/m)| (pcs/m)| (mm)| (m)
RGB| SM17512| 12| 25.3| 304| 8| 125| 5
RGBW| SM17512| 16| 30.1| 483| 8| 125| 5
Cable specification
Cutting
-
Remark:
The bottom of the led strip has transparent window, the black marker is the cutting position -
Use professional scissors
to cut vertically at the cutting mark
Connection Diagram
Single Color NEON
RGBW Color NEON
Important:
- Regular DMX512 LED Strip not include the XLR connector, if need XLR connector, extra cost will be added.
- If you want to change the starting address, you will need a DMX Address Editor, available on our website.
Installation
-
Make grooves and outlet holes according to the dimensions shown in the picture.
-
Pass the cable of the light through the reserved hole as shown in the figure.
-
Align the light to the groove, press the glowing surface of the light, and fully embed the light into the groove.
-
Completed.
- Installer:
- Press the light with the palm of the left hand to slowly load it into the slot. Straighten the light with right hand so that it droop it in the direction of your hand. See Figure 1.
- Side surface may not be bent or droop See Figure 2.
- Assistant:
- Cooperate with the installer to lift the reel of the light, and then slowly deliver the light to installer. Do not pull or twist the light during the installation.
Installation Precautions – Side Mounted (If the length of the light is more than 5 meters, two persons must work together to install it.)
- Installer:
- Press the light with the palm of the left hand to slowly load it into the slot. Straighten the light with right hand so that it droop it in the direction of your hand. See Figure 1.
- Side surface may not be bent or droop See Figure 2.
- Assistant:
- Cooperate with the installer to slowly deliver the light to installer. Do not pull or twist the light during the installation.
- Installer:
- Press the light with the palm of the left hand to slowly load it into the slot. Straighten the light with right hand, hold it and rotate it 90° to droop it in the direction of your hand. See Figure 1.
- Side surface may not be bent or droop ,See Figure 2.
- Assistant:
- Cooperate with the installer to slowly deliver the light to installer. Do not pull or twist the light during the installation.
Notes
Cooperate with the installer to slowly deliver the light to installer. Do
not pull or twist the light during the installation.
Current | Specifications of the cable |
---|---|
of the light | L=1M |
L=10M | L=12M |
1A | AWG26 |
--- | --- |
2A | AWG23 |
3A | AWG22 |
4A | AWG21 |
5A | AWG20 |
6A | AWG18 |
7A | AWG18 |
8A | AWG17 |
9A | AWG17 |
10A | AWG16 |
- The unused light should be sealed with the packaging bag to avoid prolonged exposure.
- Please use DC24V isolated constant voltage power supply with ripple voltage less than 5%. Using other types of power supply may damage the light or cause other safety risks.
- In practical application, 20% allowance should be reserved for power supply to ensure the stability of power supply.
- It is recommended that professionals connect the power supply. Do not connect the power supply with live power to avoid electric shock.
- Please confirm whether the voltage of the power supply is consistent with the voltage of the light; Pay attention to the positive and negative poles of the power cord, do not connect wrong, so as not to cause product damage;
- When multiple power supplies are used, ensure that the positive poles of the power supply are not connected in parallel. Otherwise, the power supply system may be unstable or damaged after long-term operation.
- If the actual application length exceeds the specified length, it will lead to overload, heating and uneven brightness of the light.
- During installation, please do not scratch, twist, or bend the light irregularly. Otherwise, the light may be damaged beyond repair.
- To ensure the life and reliability of the light, please do not over bend the light, which will damage the product itself.
- To protect your eyes, please avoid staring at the glowing surface of the light for a long time.
- Non-professionals are forbidden to install, disassemble and maintain the product.
- Do not use any acid or alkaline adhesive to fix the light (including but not limited to glass glue, etc.)
- Because of the difference in structure, even if the same color temperature value, different sizes of light will look slightly different colors.
Please confirm it before use.
Tests showed that methanol and benzenes will have yellowing effects on silicone. In the newly decorated interior environment, epoxy floor paint, wall paint, wallpaper adhesive, various decoration materials or new furniture, they are likely to release of methanol and benzenes. It is recommended to remove methanol and benzenes first, or ventilate for a period of time in the newly decorated interior environment before install the silicone neon light, to avoid affecting the silicone body.