AEG191214 LED Ceiling Light Alfie Instruction Manual
- June 9, 2024
- AEG
Table of Contents
ALFIE AEG191214
Instruction Manual
AEG191214 LED Ceiling Light Alfie
This product contains a light source of energy efficiency class F.
The light source should be replaced by a qualified person.
The separate control gear should be replaced by a qualified person.
Caution,
risk of elecric shock!
REMOTE CONTROL
1 ON/OFF switch of CCT
2 Warm white/ Changing the RGB colors
3 Night Light Mode
4 Automatic RGB color change
5 ON/OFF switch of RGB| 6 Increase brightness
7 Cool white / Changing the RGB colors
8 Switch mode white – / RGB control
9 Decrease brightness
10 RGB fading
---|---
Notes on battery disposal
**** When it comes to sale of batteries or delivery of devices which contain
batteries, we are required to draw your attention to the following:
As the end user, you have a legal obligation to return used batteries. You can
return old batteries which we have, or have had, as new batteries in our
range, to our shipping warehouse (Brilliant AG, Brilliantstr.1, D – 27442
Gnarrenburg), or at your local dealer, free of charge. The symbols shown on
the batteries have the following respective meanings:
Pb = Battery contains more than 0.004% lead by mass
Cd = Battery contains more than 0.002% cadmium by mass
Hg = Battery contaiss more than 0.0005% mercury by mass
The crossed out dustbin symbol means that the battery may not be included in
household rubbish.
Please observe the notes above.
Battery information
If required, clean the battery and device terminals before inserting.
Remove exhausted batteries from the device without delay! High risk of
leakage!
Never expose batteries to excessive heat such as sunlight, fire or similar!
Always replace all batteries at the same time.
Only use batteries of the same type. Do not use different types or used and new
batteries together.
Remove batteries from the device when unused for long periods.
| Function Description| Technical parameter
---|---|---
| ON/OFF switch of CCT / RGB| Memory function for all, Default:
100%@coolwhite
| Switch mode white – / RGB control| Switching mode function between white and
RGB control when both lighting modes are on. ! NOTE ! Either RGB colors or
white colors can be controlled. This button switches the function of the 4
buttons on the control ring to the corresponding mode.
| CCT Color temperature changing
(warmwhite — coolwhite)| 10 Steps color changing. PWM(5KHz):100%,90%,80%,70%,
60%,50%, 40%,30%,20%,10%,0%
| CCT or RGB Brightness dimmable (10%-100%)| 9 steps brightness dimming.
PWM(5KHz):100%,90%,80%, 70%,60%,50%,40%,30%,20%,10%
| RGB hue saturation changing| Red/Purple/Blue/Cyan/Green/Yellow/Red
Red/Yellow/Green/Cyan/Blue/Purple/Red
| Smooth RGB color changing
automatically| Color changing:
Red/Yellow/Green/Cyan/Blue/White/Yellow/Purple/Cyan/White
| Flash RGB color changing
automatically| Color changing: Red/Green/Blue/Yellow/Purple/Cyan/White
| Night light function| 10% @warmwhite + 30% @ redlight
-
Paring & disparing
1. Press and hold “ ” 3 second,after light blinking, the remote control will pare with device;
2. Press and hold “ ” 3 second, after light blinking, the remote control will dispare with device; -
Wall-switch function:
2. Wall switch color temperature control: switch cycle warmwhite/naturewhite/coolwhite,
1. Memory function; memory the light condition before last switch off, wait ≥ 10 second. each step wait ≤ 2 second
Hereby, Brilliant AG declares that the radio equipment type Alfie AEG191214 is in compliance with Directive 2014/53/EU. The full EU declaration of conformity can be requested at the following internet address: www.aeg- lighting.de
NOTES ___
Brilliant AG
Brilliantstr. 1
D-27442 Gnarrenburg
Germany
www.aeg-lighting.de
Telefon: +49 4763 89-0
E-Mail: info@aeg-led.lighting
Technische Änderungen vorbehalten. AEG is a registered trademark used under
license of AB Electrolux (publ).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>