GARETT Kids Twin 4G Smartwatch User Manual

Garett
Kids Twin 4G

User manual

Thank you for purchasing the Garett Kids Twin 4G

SAFETY ISSUES

Before use, read this user manual carefully and keep it for further
reference. The manufacturer shall bear no liability for any damage/injuries caused by improper use. Depending on the smartwatch batch, certain functions may differ from the functions described in this user manual.

• Using this device in the vicinity of medical devices may disrupt their operation. Users should pay special attention when using the smartwatch in the vicinity of medical devices such as pacemakers, hearing aids, and other electronic medical devices.
• Do not dispose of the device in fire. There is a risk of battery explosion and the resulting threat to life and health.
• Protect the device from heat sources and direct sunlight.
• Do not store the device in damp places or at high temperatures, because it may cause electric shock or fire.
• The device is not resistant to long-term immersion in water.
• Do not swim or dive while wearing the device.
• In case of failure/damage, please stop using the product and contact the Garett service center. Any attempts to make your own repairs may damage the device and result in the invalidation of the warranty.
• The device should only be cleaned with a soft, slightly damp cloth. Do not
  use strong detergents or any other stimulants to clean the product.

Do not swim while wearing the device. The IP67 standard does not guarantee that the smartwatch will be waterproof while swimming. The forces acting on the device during swimming may cause it to become unsealed and damaged.

PRODUCT DESCRIPTION

1. Touchscreen display
2. Touchback button
3. Function button (on/off/back/wake/lock screen/SOS)
4. Photo/video camera
5. Nano SIM card slot
6. Magnetic charging port
7. Interchangeable strap

NANO SIM CARD REQUIREMENTS

1. The device requires the installation of a Nano SIM card.
2. The SIM card must meet the following requirements:
   • The card must be active (if it is a new card, you will need to activate it in a mobile phone by making an outgoing call),
   • The card must be topped up (applies to prepaid cards),
   • The card cannot have an active PIN code (to check whether the card has an active PIN lock, install it in a mobile phone and check whether a PIN code is required when starting up the phone – if so, the PIN lock is active and will need to be disabled in the phone settings or by contacting the operator),
   • The card must support 2G/3G/4G modes, have active internet service and caller ID function;

SIM cards offered by operators as data-only, e.g. those designed for tablets, may not function properly in the device.

Since the device uses an internet connection, we recommend purchasing an internet package from the operator to avoid additional costs.
A 1 GB/month package is sufficient. The costs of internet connection, voice calls, and text messages are specified in the price list of your mobile operator.

INSTALACJA KARTY NANO SIM

1. First, remove the Nano SIM card port cover(5) on the left side of the watch.
2. Then take out the tray and place the card on it according to the illustrative diagram in the picture, i.e. with the chip of the card facing towards the display and the rectangular side of the card facing toward the slot.
3. Insert the tray into the watch, ensuring that it fits properly.

Install the SIM card when the device is turned off.

OPERATION

Turning on/off
To start the device, press and hold the function button(3) for approx. 5 seconds. To turn it off, repeat the action and confirm that you want to turn it off (in the case of an installed SIM card, the function button(3) serves as the SOS button).
In case the smartwatch does not start up, try to charge it.
After start-up
The smartwatch is operated using a screen and a touch button, as well as a function button.
Changing the watch face
Press and hold the home screen to display the face change menu. Select the dial by swiping right/left and then click anywhere on the screen to confirm your selection.

Navigation
Swipe left/right on the home screen to access the main menu. By touching the screen you will enter the selected function. After entering the function, swiping right or pressing the touch back button(2) allows you to return to the previous screen while pressing the function button(3) takes you to the main screen.
Swipe down on the home screen or menu to access the settings bar. It allows you to preview and quickly change selected functions of the smartwatch.
Swipe up on the home screen or menu to access the pedometer.  It allows you to view the number of steps taken (the function should be enabled in the Garett Tracker application in the tab Activity>Pedometer>Measurement).

ŁADOWANIE

1. The smartwatch is charged using the magnetic cable supplied with the device.
2. Attach the end of the magnetic cable so that the contacts of the watch touch the contacts of the charging cable. Then connect the other end of the cable to the USB port of a computer or a USB power adapter. When it is connected properly, the charging animation will appear on the watch screen.

If there is no animation, make sure the watch is properly connected.
When the battery is completely discharged, the animation may appear after several minutes. Before switching on the watch for the first time, it is recommended to charge it for about 2 hours.
The charging voltage should not exceed 5V.
The recommended maximum charging current is 1A.

FIRST START-UP

1. When the Nano SIM card is properly installed in the watch and meets all the requirements described above, start the device by pressing and holding the function button(3) for approx. 5 seconds.
   

2. After starting the watch, the home screen will appear, displaying the time and date. Swiping down on the home screen or menu will display the Wi-Fi signal, GSM signal, internet connection, battery level and quick menu (brightness, volume, settings).

3. Wait until the GSM signal (icon – ) and internet connection (icon – ) appear. They are necessary for the further configuration of the device. If the above-mentioned icons do not appear after one minute, make sure that the SIM card meets all the requirements described above and that the watch is in a place where it can connect to the network. You should also turn off (Settings>Turn off) and restart the watch. If the GSM signal appears but the internet connection continues to be unavailable (no icon – ), the problem may be due to an incorrect APN configuration. You can configure the APN via special configuration text messages, described later in the manual in the TROUBLESHOOTING section.

4. When the internet connection is active, proceed to the next step, i.e. installing the Garett Tracker app on your phone. The main menu of the smartwatch is described later in the manual. The device will be fully functional after registration and configuration of the watch via the Garett Tracker app.

Video tutorial – Garett Tracker
How do you use the Garett Tracker app?
If you want to learn more about configuring the device via the Garett Tracker app, we recommend checking out this video – scan the QR code or use the link.

https://www.youtube.com/watch?v=1VJjvs1raaA

INSTALLING THE GARETT TRACKER APP

The smartwatch works with your smartphone using the Garett Tracker app. Before use, you must first download the app from the Google Play Store or the AppStore and install it on your phone. You can search for the app by entering the name “Garett Tracker” in the store search engine or by scanning the relevant QR code provided below.

|
---|---
https://play.google.com/store/apps/details?id=com.tgelec.garetts| https://apps.apple.com/pl/app/garett-tracker/id1294612215?l=pl

Remember to grant the app the required consent and permissions before registration so that it works properly. If you refuse, selected functions of the app may not work properly or will be unavailable.

REGISTERING IN THE APP

1. Launch the Garett Tracker app.

2. After launching the app, a login screen will be displayed, where you can log in to your account (if already created), register a new account or change the app language.

3. To register a new account, click the Registration option.

4. In the first field, enter your e-mail address that will serve as your login to the app.

5. Then retype the verification code from the image generated on the right.

6. In the last field, enter your password which, together with the e-mail address, will be used to log in to the app. The password may consist of 6-12 characters. Polish characters and special characters are not allowed.

7. After filling in all the details, click Registration.
   Please remember or note down the e-mail address and password used to register the watch, because the account to which the device was first assigned is the administrator account. Re-registration will be possible only after obtaining permission from the administrator or after contacting our Technical Support Department: [email protected]

8. Then press the Add Device button to add the watch to the previously created account.

9. On the next screen, scan the QR code using the button from the sticker on  the back of the watch (REG CODE) or inthe watch settings. The code can be also entered manually.

10. Enter the device name, and it will be displayed as the name of the device associated with your account.

11. The next step is to choose your relationship with the user of the smartwatch.

12. Optionally, enter the phone number of the device, which will facilitate communication.

13. After filling in all the details, click OK, and the device and Garett Tracker app will be fully functional.
    In the event of any problems with the registration of the device, please contact our Technical Support Department: [email protected]

GARETT TRACKER APP
After completing the registration and adding the device, the home screen of the app will be displayed, showing the map with the last watch location. The bubble over the pin specifying the location displays the source of location data (GPS/LBS/WiFi), address, time of the last location, and watch battery level.

To ensure the most accurate location, the smartwatch must be in an open area, in order to have an accurate and stable GPS signal. When there is no GPS signal, e.g. because it is inside a building, the location is determined based on the nearest mobile network transmitter. In this case, the indicated position of the device may differ from its physical location.

NOTE: When using any function of the Garett Tracker app or trying to configure the settings, the following message may appear: “The device is offline”. This means that the smartwatch has no active internet connection or is out of Check whether your SIM card is properly installed and meets all the requirements described earlier in the manual. If the SIM card is properly installed and meets the criteria described, the lack of signal may be due to an incorrect APN configuration. The way to get the proper APN configuration is described later in the manual in the TROUBLESHOOTING section.

– Chat: The ability to send short voice messages (max. 15 seconds), short text messages (max. 30 characters) and photos to the watch
– GEO- fence : This function lets you define the area in which the watch user may move around. The app will inform you when the user crosses the geofence. To define the area, click + and then select any location on the map – this will be the centre of the geofence. Enter the name and radius of the area (max. 2 km).
– Locate: Clicking on this icon refreshes the data on the current location of the watch.
– History: Displays the route travelled by the user of the watch from the previous days.
– Pop-up menu: The ability to display and configure selected watch functions:
– Whitelist: Incoming call filtering – it means that only the numbers on the Whitelist and that have been previously saved in the phone book will be able to get through to the watch.
– Remote camera : Take a photo using the watch camera and send it to the app.
– Activity: Configuration and display of the activities performed by the watch user, up to several days back.
– Video chat: The ability to make video calls between the administrator and the associated watch.

Due to the large amount of data transmitted during a video call, a high- bandwidth internet connection is required. The LTE connection is recommended. In locations with poor mobile network coverage, such as areas outside cities or towns, shopping malls or underground car parks, making video calls may not be possible, or the calls may be of poor quality with interruptions in video transmission.

– Device lock The ability to restrict the functionalities of the watch to SOS calls only.
– Alarms: View and configure the alarms active on the device (max. 3).
– Notifications: History of recent notifications, e.g. SOS calls, low battery.
– Rewards: Reward system – each reward is one heart. The total number of rewards is displayed on the home screen of the watch.
– Personal details: The ability to display and configure the user details:
– Profile: Configure the personal details of the account administrator.
– Device list: The ability to display and add/edit associated devices. By clicking on a device name, you can change its details. The Switch option allows you to switch the active device, i.e. the one being currently tracked. To remove a watch from the list, select Edit>Delete.
– Change password: Change the password used in the app.
– Log out: Log out of the app.

– Change map view: The ability to change the map style.
– Phone location: Indicates the current location of the phone on which the app is launched.
– Device location: Indicates on the map the location of all associated devices in the app.
– Switch: Quickly switch between associated devices.

– Settings: The ability to display and configure the functions:
– SOS numbers: Configure SOS numbers (max. 3). Pressing and holding the SOS button on the watch will call the first number.
If the call is unsuccessful, the watch will automatically dial the second and then the third number. If the SOS call is answered by the voicemail active on one of the SOS  numbers, it will not be redirected to the next number. The SOS function is active only when the watch is within range of the network, has an internet connection, and the account is sufficiently topped up.
– Voice monitoring: Remote voice monitoring. Enter a phone number to activate the function. The watch will automatically call back the phone number entered within 30 seconds. The watch screen remains unchanged – it is completely discreet.

When configuring the functions SOS Numbers – and Voice monitor – , enter the numbers without the country code (if necessary, add 0048 before the number for PL). Using the “+” symbol may prevent calls from being made.

– SMS messages: The ability to read text messages sent to the number on the watch.

– Modes of operation: Select the refresh frequency of the watch location:

• Tracking mode – refreshes every 1 minute (reduces the running time of the watch),
• Normal mode – refreshes every 10 minutes,
• Battery saving mode – refreshes every 1 hour,
• Sleep mode – manual positioning.

– SMS notifications : Turn on/off and configure text message notifications on the phone number provided.
– Family members: List of administrators who can manage the watch.
– Phone book: The ability to add contacts, which will be displayed in the phone book of the watch.
– Time zone: Configure the time zone of the watch (PL: East: GMT + 1:00).
– Language: The ability to change the language of the smartwatch.
– Management:

• Numeric keypad: The ability to turn on/off the numeric keypad function on the watch. Turning on this function allows the watch user to dial and make a call to any number (including those not entered in the phone book). If you do not want the watch user to be able to contact numbers not entered in the phone book, turn off this function.
• GPS positioning: The ability to turn on/off the GPS positioning function of the watch.
  – LBS: The ability to turn on/off the tracking function of the watch based on the nearest mobile network transmitter, in the event that the watch loses GPS signal.
  – Watch finder: The ability to search for your watch – this function triggers an audible alarm.

– Turn off watch: Turn off the watch remotely.
– Restart watch: Restart the smartwatch.
– Restore factory settings: The ability to reset the watch to factory settings.
– Delete account: Send a request to delete the account from the app server. The account should be deleted within one hour.

Log out : Log out of the app.
Depending on the device model, the functions of the Garett Tracker app described above may vary. In the event of any problems, we encourage you to contact our  technical Support Department: [email protected]

MAIN MENU

– Video call: Video calling function. Possibility to make video calls between the administrator and the related watch, group chat is also available. Select the person and press the green phone icon to start the call. We interrupt the conversation by pressing the red phone icon or the function button(2). We answer incoming calls using the green phone icon and similarly reject the red one or the function button(2). You can adjust the volume during a call – the speaker icon.
Due to the large amount of data transferred during a video call, an Internet connection with high bandwidth is required. An LTE connection is recommended. In the case of locations with poor mobile network coverage, such as out-of- town areas, shopping malls or underground parking lots, it may be impossible to make a video call or it may be of low quality with interruptions in image transmission.

– Contacts: Telephone book function. View contacts previously saved via the Garett Tracker application. Dial the number and press the green phone icon to start the call. We interrupt the conversation by pressing the red phone icon or the function button(2). We answer incoming calls using the green phone icon and analogically reject the red one or the function button(2). You can adjust the volume during a call by clicking the speaker icon.

– Camera: Camera function. Take pictures (max. 3) with one of the watch’s built-in cameras (press to switch between front/rear cameras). To take a photo, click the camera icon at the bottom of the screen once. The photo is saved in your device gallery. It is possible to send a photo to the watch administrator from the Gallery( ) level of the smartwatch. It will appear in the Garett Tracker application in the tab Remote camera.
– Phone: Numeric keypad function. It allows you to dial any number (even from outside the phone book) and make the connection. The ability to disable the function through the Garett Tracker application in the tab Management>Numeric keyboard.
– Chat: Voice/text message function. It displays the last voice memo (green box) or the last text message (purple box) sent from the Garett Tracker application to your watch. It is possible to send a voice message from the watch. To send a note, press and hold the button at the bottom of the screen, dictating the message at the same time (max. 15 seconds). Release the button to send a message to the watch administrator. It will appear in the Garett Tracker application in the tab Chat.
 – QR code: Displays the registration code (REG CODE) and the Garett Tracker app QR code.
– Gallery: The watch’s gallery function. Press the photo, then – to send or – to delete the photo.

– Settings:

• Dial gallery: The ability to change the watch face,
• Volume: Smartwatch volume control,
• Brightness: Adjust the brightness of the display,
• Date and time: Date and time settings,
• Sleep: The screen timeout configuration (from 15 seconds to 1 minute),
• VoLTE: On/off switching ability for VoLTE technology,
• Language: The ability to change the language of the smartwatch interface,
• Turn off : Device shutdown,
• Information: It displays the software version.

– Math game: Simple mathematical game.
– Alarm: The ability to view the alarm previously configured in the app.
– Stopwatch: Stopwatch function.
– Calculator: Simple math calculator function.
– Pedometer: Pedometer function. Displays the number of steps taken. Option to enable/disable this function in the Garett Tracker application in the tab Activity>Pedometer>Measurement.

Depending on the software version of the device, the functions of the smartwatch described above may vary. In the event of any problems, we encourage you to contact our Technical Support Department: [email protected]

TROUBLESHOOTING

1. The device does not turn on:

• Connect the device to a wall charger for approx. 2 hours,

• Check whether the charging cable and charger are working,

• Check whether the device is properly connected. 2. No GSM signal (icon – ):

• Check whether the SIM card format is correct,

• Check whether the SIM card is inserted properly in the slot (as specified at the beginning of the manual),

• Check whether the SIM card meets all the requirements (described at the beginning of the manual).

• Turn the device off and on again,

• Check whether the watch works with another SIM card. 3. No internet connection (no icon – or the following message in the Garett Tracker app: “The device is offline”):

• Check whether the SIM card meets all the requirements (described at the beginning of the manual).

• Enter the APN configuration:
  Send a text message from any mobile phone to the number on the watch (the SIM card must be inserted and the watch must be on; the message is case- sensitive):
  Content of the first text message: pw,123456,ts#
  After a while, you should receive a response to your phone containing detailed information about the watch, i.e. the software version, ID, IMEI, IP address and other information. For the watch to work properly, the ip_url field must contain:
  ip_url:52.28.132.157; port:8001;
  If the ip_url field differs from the example provided, please contact our Technical Support Department: [email protected]  
  pw,123456,apn,plus#
  Correct response:
  apn:plus;user:;passwork:;userdata:.
  Orange, NJU Mobile:
  pw,123456,apn,internet,internet,internet#
  Correct response:
  apn:internet;user:internet;passwork:internet;userdata:.
  After receiving the correct response, send a text message to the number on the watch:
  Content of the text message:
  pw,123456,reset#
  You will receive a message stating “reset..”, and the smartwatch will restart in order to save the settings. After a few minutes, the watch should connect to the internet. If you do not receive responses to any of the messages, change the numbers “123456” to “523681” in the content of the text message and then repeat the entire configuration.

  4. Inaccurate GPS location:

• Check whether the watch has a GPS signal (icon – ),

• The watch must be in an open area (if the watch loses GPS signal, e.g. because it is inside a building, the location is determined based on the nearest mobile network transmitter). 5. Calling the watch is impossible – busy signal or user unavailable:

• Check whether the number you are calling from is topped up,

• Check that neither your number nor the number on the watch is blocked or restricted,

• Check whether the Whitelist option is turned on (if your number is not saved in the phone book and the Whitelist is on, the watch will reject the call). 6. Calling from the watch is impossible:

• Check whether the watch has a GSM signal (icon – ),

• Check whether the SIM card meets all the requirements (described at the beginning of the manual).

• Check that the numeric keypad function is turned on or that there are contacts saved in the phone book of the watch. 7. During calls, you cannot hear the other person in the smartwatch speaker:

• Check that the speaker on the watch has not been muted (you can adjust the sound volume in the watch settings). 8. Short battery life:

• Check that the watch charging time was not too short (the recommended charging time is approx. 2 hours),

• Check the current operating mode on the device (Normal mode or Battery saving mode are the recommended options).

In the event of any problems with using the device, we encourage you to visit the Technical Support section on our website (scan the QR code/use the link) or contact the Technical Support Department: [email protected]

https://garett.com.pl/pl/i/Pomoc-techniczna/145

TECHNICAL SPECIFICATIONS

| GSM module: 2G / 3G / 4G| | Processor: ASR 3603
---|---|---|---
| Battery: 800 mAh| | Weight: max. 51 g
| Display: IPS 1,4″| | Face dimensions: 56 x 43,5 x 15,5 mm
| Interchangeable strap| | Water resistance: IP67
| Dedicated app: Garett Tracker| | Warranty: 24 months

More information about this device is available at www.garett.pl. Visit our website to see more products and accessories.

WARRANTY/CLAIMS

The product is covered by a 24-month manufacturer’s warranty. The warranty does not cover defects and damage caused by the user or as a result of improper use (misuse), mechanical damage and damage resulting from using accessories and/or consumables other than those provided with the device. When lodging a complaint, fill in the warranty card supplied with the device and send the device accompanied with proof of purchase to the address of the service center provided on the warranty card.

Contact details are available on the website: www.garett.eu

Manufacturer:
GARETT sp. z o.o.
Targowa 18/1413
25 – 520 Kielce
www.garett.eu

Proper disposal of the product (waste electric and electronic equipment)

As indicated by the marking on the product or in the related content, the device should not be disposed of with other household waste after the end of its service life. To avoid harm to the environment and human health as a result of uncontrolled waste disposal, please separate the product from other types of waste and recycle responsibly in order to promote the reuse of material resources as a regular practice. For information about where and how to recycle this product in a way that is safe for the environment, household users should contact the retail outlet at which they purchased the product or local authorities. Business users should contact their suppliers and check the terms of the purchase agreement. Do not dispose of the product with other commercial waste.

https://www.logodesign.net/

Find us on:

| |
---|---|---
https://pl-pl.facebook.com/garettpl/| https://www.instagram.com/garettelectronics/| https://www.youtube.com/channel/UCmTYtB8M3rL8R2RHbaY_neA

References

• Smartwach - Garett Electronics
• Sprzedaż smartwatchy, produktów beauty, gogle VR, zegarek smartwach, GPS dla dzieci, damski, męski - Garett Electronics
• Pomoc techniczna - Garett Electronics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>