XUGUANG TECHNOLOGY MW-10 Smart WiFi Bluetooth Sensor Wall Switch User Manual

XUGUANG TECHNOLOGY MW-10 Smart WiFi Bluetooth Sensor Wall Switch User Manual

Attention

1. Products should be paired on 2.4G-Wifi-router instead of 5G-Wifi-router.
2. Please set your home WiFi account name and password by using numeric and letters, don’t use special symbols

Installation

Separate the upper and lower parts from the switch by screwdriver.
Dimesion:3.43.41.4in

(Noted: Distinguish between each corresponding slot)

Wiring Diagram

Without neutral wire version(No neutral wire is required on theswitch) according to the following diagram wiring.

1. Neutral wire.
2. Live wire.
3. Switch.
4. Capacitorit must to be connected toL1 and Neutral wire.
5. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.
6. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.
7. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.
8. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.

With neutral wire version (Neutral wire is required on the switch) according to the following diagram wiring.

1. Neutral wire.
2. Live wire.
3. Switch.
4. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.
5. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.
6. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.
7. Lighting,They’re between L1,L2,L3, L4 and Neutral wire.

Fix the switch onto wall

• Put the switch lower parts into switch box in the wall
• Mount the two side screws.
• Install the upper top case(install from up above).
• Cover the upper top case into switch.
• Turn on electricity, and then LED light will be flashed quickly for pairing.

Indicator light status

• The WIFI lindicator light went out.
  • The switch is connected succeed with mobile phone APP.
• The WIFI lindicator light blinking slowly.
  • The switch is not connected to the network.
• The WIFI lindicator light flash continuously and quickly. -The switch is currently on the status of matching with mobilephone APP.
• The WIFI lindicator light flash 1 time every 3 seconds.
  • The switchisinto AP pairing Mode.
• How to resetthe switch?
  • Long press any button for 10-12seconds.
• How to download App?
  Scan the QR code below or search for doodle intelligence in theIOS APP store or Google play.
  

Setting Smart Life APP.How to Register and Login

• Download or Scan the QR Code and install Smart Life App.

• Once download or Scan the QR Code, the App will ask you tc

• Enter your phone number or email which you prefer and select the country you live in.

• Obtain verification code.

• Enter verification code.

• Set Password.

• Create family.

• Enter the family name and select the room.

• Family created sucessfully.

Switch pairing

• First the Phone needs to turn on Bluetooth.

• Connect the switch with power.

• Open App and click Add Device or upper right corner “+” The APP interface will pop up a window: discover the devices to be added, you can choose to add/do not add, or select “Switch (BLE)”

• Select”+then entering the WiFi password.

• Select”+then entering the WiFi password.

How to match RF remote controller? (For having RF fuction switch)

• Connect the switch with power.
• Connectthe switch with WIFI
• Hold the switch power button for 4 seconds, the buzzer sounds”drip”, then press the “remote control” button, the “remotecontrol” will sound “drip”,wait for the switch to sound “drip”connecting successfully an,take turns pairing up each group. (Attention: The swich needs to be connected with the remotecontroller and then with the APP connect to network, The remotecontroller resets the switch connected to the network duringcode matching)
• How to remove remote controller?
  Press the switch touch button 6 seconds, the buzzer rings twice”dripdrip”,the remote completes the removal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>