GARETT Lady Elegance RT Smartwatch User Manual

GARETT Lady Elegance RT Smartwatch User Manual

www.garett.eu

Thank you for purchasing the Garett Lady Elegance RT

SAFETY ISSUES

Before use, read this user manual carefully and keep it for further reference. The manufacturer shall bear no liability for any damage/injuries caused by improper use. Depending on the smartwatch batch, certain functions may differ from the functions described in this user manual.

• Using this device in the vicinity of medical devices may disrupt their operation. Users should pay special attention when using the smartwatch in the vicinity of medical devices such as pacemakers, hearing aids and other electronic medical devices.
• Do not dispose of the device in fire. There is a risk of battery explosion and resulting threat to life and health.
• Protect the device from heat sources and direct sunlight.
• Do not store the device in damp places or high temperatures, because it may cause electric shock or fire.
• Do not immerse the device in hot water.
• Do not dive while wearing the device.
• In case of failure/damage, please stop using the product and contact the Garett service centre. Any attempts to make your own repairs may damage the device and result in invalidation of the warranty.
• The device should only be cleaned with a soft, slightly damp cloth. Do not use strong detergents or any other stimulants to clean the product.

Garett Lady Elegance RT is not a medical device. The smartwatch and the FitCloudPro app are not designed for medical diagnosis, treatment or as a preventive measure against illness or disease. You should seek medical advice first before changing your sleep and physical activity habits.

PRODUCT DESCRIPTION

1. Touchscreen
2. Function button (on/off/return/wake up/blank/navigation to the menu)
3. Sport modes button
4. Set of sensors
5. Magnetic charging port
6. Interchangeable strap

INSTALLATION

Put the watch on your wrist and adjust the strap length so as to ensure the device strap is not too loose.

OPERATION

CHARGING

1. The smartwatch is charged using the magnetic cable supplied with the device.
2. Attach the end of the magnetic cable so that the contacts of the watch touch the contacts of the charging cable. Then connect the other end of the cable to the USB port of a computer or a USB power adapter. When it is connected properly, the charging animation will appear on the watch screen.

If there is no animation, make sure the watch is properly connected.
When the battery is completely discharged, the animation may appear after several minutes. Before switching on the watch for the first time, it is recommended to charge it for about 2 hours.

Charging voltage should not exceed 5V.
The recommended charging current is maximum 1A.

INSTALLING THE DA FIT APP

The smartwatch works with your smartphone using the Da Fit app. Before use, you must first download the app from the Google Play Store or the AppStore and install it on your phone. You can search for the app by entering “ Da Fit ” in the store search engine or by scanning the relevant QR code provided below.

Garett Lady Elegance RT smartwatch does not require a permanent smartphone connection, but in order to fully enjoy the functions of the watch you need to pair it with the app.

Each time the smartwatch is turned on and paired with the app, the data synchronise automatically. The smartwatch measures and analyses certain user data in standby mode. Garett Lady Elegance RT has a set of sensors that monitor movement and the measurements taken in order to determine the details of sleep and physical activity

PAIRING

Process of pairing

1. Activate Bluetooth on your phone.
2. Make sure the smartwatch is switched on.
3. Open the Da Fit application, grant it all permissions and enter the smartwatch user data.
4. Go to the Device tab, click Add Device , then select the device named AK37.
5. When pairing, place the watch close to the phone you are pairing it with.
6. After successful pairing, the data will be fully synchronized.

The Garett Lady Elegance RT smartwatch works with smartphones that support Bluetooth 5.1 connectivity. It is also compatible with Android 4.4 (and newer) and iOS 9.0 (and newer).

Remember to grant the app the required consents and permissions before pairing so that it works properly. If you refuse, selected functions may not work properly or will be unavailable.

ADDITIONAL PAIRING

(Necessary for optional Bluetooth functions)

If you want to use additional Bluetooth functions, such as making voice calls using the smartwatch or synchronizing the phone book from the phone, you must make an additional connection directly from the phone’s Bluetooth settings.

1. Activate the Bluetooth connectivity on your phone.

2. Activate the Phone function in the smartwatch settings: Swipe left on the home screen to go to the main menu. Then, find and select
   the receiver icon. Make sure the battery level is not too low (otherwise the function will not start).

3. After activation, the device will start pairing with the phone automatically.

4. Give your consent to pair the phone with the smartwatch, i.e .: AK37_PHONE or if automatic pairing does not work, search for it in the phone’s Bluetooth settings and connect to the device.

5. After connecting, grant permission to sync the contacts for the Bluetooth functions to work properly

MAIN MENU

TAKING MEASUREMENTS

Make sure the sensor is in contact with the skin before starting the measurement. The area where the measurement is performed should be kept clean – dirt may have a negative effect on the result.

To start, go to the desired function in the smartwatch (Heart Rate, Blood Pressure or Blood Oxygenation). The measurement is started by clicking anywhere on the screen and should take approximately 1 minute to get the optimal result.

Keep your body relaxed and still during the tests.
Hold the device at the same height as your heart, do not speak during the test .

DA FIT APPLICATION

1) Main page

It displays the most important information on activity and health data from the current day..

• Steps: Activity from the current day. In the options, you can view a summary of the last 7 days.

• Sleep : Data about your last sleep.

• Heart Rate : Data related to your most recent heart rate measurements. MEASURE button starts remote measurement.

• Blood pressure : Data on the most recent blood pressure measurements. MEASURE button starts remote measurement.

• Saturation : Data on the most recent saturation measurements.
  MEASURE button starts remote measurement.

• Running outdoors : Possibility to record activity and travelled route using the GPS module in the phone.

• Activity history : The activities saved using sport modes on the smartwatch will be displayed at the bottom of the home screen.

2) Device

Settings regarding the smartwatch and its functionality.

• Watch Faces: You can change the look of the watch face.
• Notifications: Select which notifications appear on the watch.
• Alarms: Switching On/Off and the configuration of alarm clocks activated on the watch.
• Shutter: Take photos by shaking the wrist on which the watch is placed.
• Favorite Contacts: Phone book feature.
• Others: Additional functions and settings for the watch.
• Upgrade: View the version of the smartwatch software and update it.

3) Device – Others

Additional functions and settings for the smartwatch.

• Find Device: Function for searching for the watch. This option activation will display a message and start vibrations in the smartwatch.
• Time Format: Ability to change the time format to 12/24 hours.
• Unit System: It configures the units for length, weight, and temperature.
• Do Not Disturb: Switching on/off option for vibration on the watch at a new notification.
• Reminders To Move: Ability to switching on/off and configuration of inactivity notifications.
• Continous Heart Rate Detection: Switching on/off the continuous heart rate monitoring function.
• Language: Select the language for the smartwatch menu.
• Auto-Lock: Configure the time until the watch screen switches off.
• Reset: Restore factory settings on the smartwatch.
• Quick View: Switching on/offoption for waking up the watch screen with your wrist movement.
• Weather: Settings for the weather displayed on the watch.

3) Device – Drink Water Reminder

Hydration notification settings.

Device – Physiological Cycle Reminder

Settings for notification related to the menstrual cycle.

• Physiological Cycle Reminder: Switching on/off the function.
• Cycle Days: Select the number of cycle days.
• Menstrual Days: Select the number of days of menstruation.
• Last Menstrual Start Date: Select the last start date of your period.
• Reminder Mode: Set up the reminders for the day before menstruation / ovulation / peak ovulation and end of ovulation period.
• Reminder Time: Select the time for the above reminders.
• Physiological Cycle Calendar: Ability to view the menstrual calendar.

4) My

The ability to configure and view personal data and settings related to the smartwatch user profile.

• Profile: Display and configuration of application user data.
• Goal: It defines a daily step goal.
• Health (iOS only): An Apple Health profile can be connected.
• Background Operation Protection Guide (Android only): Instruction on malfunctioning of application notifications.
• Google Fit: You can connect a Google Fit profile
• About: Information about the Da Fit application.

TECHNICAL SPECIFICATION

More information about this device is available atwww.garett.pl. Visit our **website to see more products and accessories.**

WARRANTY/CLAIMS

The product is covered by a 24-month manufacturer’s warranty. The warranty does not cover: defects and damage caused by the user or as a result of improper use (misuse), mechanical damage and damage resulting from using accessories and/or consumables other than those provided with the device. When lodging a complaint, fill in the warranty card supplied with the device and send the device accompanied with proof of purchase to the address of the service centre provided on the warranty card.

Contact details are available on the website: www.garett.eu

Manufacturer:
GARETT sp. z o.o.
Targowa 18/1413
25 – 520 Kielce
www.garett.eu

Proper disposal of the product (waste electric and electronic equipment)

As indicated by the marking on the product or in the related content, the device should not be disposed of with other household waste after the end of its service life. To avoid harm to the environment and human health as a result of uncontrolled waste disposal, please separate the product from other types of waste and recycle responsibly in order to promote reuse of material resources as a regular practice. For information about where and how to recycle this product in a way that is safe for the environment, household users should contact the retail outlet at which they purchased the product, or local authorities. Business users should contact their supplier and check the terms of the purchase agreement. Do not dispose of the product with other commercial waste.

Find us on:

References

• Smartwach - Garett Electronics
• Sprzedaż smartwatchy, produktów beauty, gogle VR, zegarek smartwach, GPS dla dzieci, damski, męski - Garett Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>