GARETT 473926 Classy Smartwatch User Manual

: June 4, 2024
: GARETT

Table of Contents

GARETT 473926 Classy Smartwatch
SAFETY ISSUES
PRODUCT DESCRIPTION
INSTALLATION
OPERATION
CHARGING
INSTALLING THE FITCLOUDPRO APP
PAIRING
MAIN MENU
TAKING MEASUREMENTS
FITCLOUDPRO APP
TECHNICAL SPECIFICATIONS
WARRANTY/CLAIMS
Documents / Resources

GARETT 473926 Classy Smartwatch

GARETT 473926 Classy Smartwatch
product

SAFETY ISSUES

Before use, read this user manual carefully and keep it for further reference. The manufacturer shall bear no liability for any damage/injuries caused by improper use. Depending on the smartwatch batch, certain functions may differ from the functions described in this user manual.

Using this device in the vicinity of medical devices may disrupt their operation. Users should pay special attention when using the smartwatch in the vicinity of medical devices such as pacemakers, hearing aids and other electronic medical devices.
Do not dispose of the device in ﬁre. There is a risk of battery explosion and resulting threat to life and health.
Protect the device from heat sources and direct sunlight.
Do not store the device in damp places or high temperatures, because it may cause electric shock or ﬁre.
Do not immerse the device in hot water.
Do not dive while wearing the device.
In case of failure/damage, please stop using the product and contact the Garett service centre. Any attempts to make your own repairs may damage the device and result in invalidation of the warranty.
The device should only be cleaned with a soft, slightly damp cloth. Do not use strong detergents or any other stimulants to clean the product.

Garett Classy is not a medical device. The smartwatch and the FitCloudPro app are not designed for medical diagnosis, treatment or as a preventive measure against illness or disease. You should seek medical advice ﬁrst before changing your sleep and physical activity habits.

PRODUCT DESCRIPTION

GARETT 473926 Classy Smartwatch fig
1

Touchscreen
Function button (on/off/return/wake up/blank/navigation to the menu)
Set of sensors
Magnetic charging port
Interchangeable strap

INSTALLATION

Put the watch on your wrist and adjust the strap length so as to ensure the device strap is not too loose.

OPERATION

Turning on/off

To start the device, press and hold the function button(2) for about 5 seconds. To switch off, repeat the action and conﬁrm switching off.
In case when the smartwatch does not start up, try to charge it.

After start-up

The smartwatch is operated using touch screen and function button.

Dial change

Press and hold the home screen to display the menu for changing the smart watch face. While swiping right/left choose the dial look and then conﬁrm your choice by clicking any place on the screen.
More dials available in the FitCloudPro application.

Navigation

Press the function button from the home screen to access the main menu. By touching the screen you will enter the selected function. After entering the function, swiping right allows you to return to the previous screen or pressing the function button(2) takes you to the main screen. GARETT 473926
Classy Smartwatch fig 5
Swipe right on the home screen to access a pop-up menu such as: Recently Selected Features, FitCloudPro QR Code and Do Not Disturb Mode.

Swipe left on the home screen to access the quick menu, i.e .: daily activity summary, heart rate measurement and sleep recording. You can add your own widget using the + button.
Swipe down on the home screen to access the settings bar. It allows you to quickly change selected functions of the smartwatch.
Swipe up on the home screen to access the recent notiﬁcations. It enables viewing/removing notiﬁcations. GARETT 473926 Classy Smartwatch fig
6

CHARGING

The smartwatch is charged using the magnetic cable supplied with the device.
Attach the end of the magnetic cable so that the contacts of the watch touch the contacts of the charging cable. Then connect the other end of the cable to the USB port of a computer or a USB power adapter. When it is connected properly, the charging animation will appear on the watch screen.

If there is no animation, make sure the watch is properly connected. When the battery has completely run out, the animation may take 10 – 20 minutes to appear. It is recommended to charge your smartwatch for approx. 2 hours before turning it on for the ﬁrst time.

The charging voltage should not exceed 5V.
The recommended maximum charging current is 1A.

INSTALLING THE FITCLOUDPRO APP

The smartwatch works with your smartphone using the FitCloudPro app. Before use, you must ﬁrst download the app from the Google Play Store or the AppStore and install it on your phone. You can search for the app by entering “FitCloudPro” in the store search engine or by scanning the relevant QR code provided below. GARETT 473926 Classy Smartwatch fig 8

Garett Classy smartwatch does not require a permanent smartphone connection, but in order to fully enjoy the functions of the watch you need to pair it with the app.
Each time the smartwatch is turned on and paired with the app, the data synchronise automatically. The smartwatch measures and analyses certain user data in standby mode. Garett Classy has a set of sensors that monitor movement and the measurements taken in order to determine the details of sleep and physical activity.

PAIRING

The pairing process

Turn on Bluetooth on your phone.
Make sure that the smartwatch is on.
Open the FitCloudPro app, grant it all permissions and enter the data of the smartwatch user.
Go to Device, click the +Add Device option, then select the device named NY20.
When pairing, place the watch close to the phone you are pairing it with.
After successful pairing, the data will be fully synchronized.

The Garett Classy smartwatch works with smartphones that support Bluetooth 5.0. It is also compatible with Android 4.4 (and higher), as well as iOS 10.0 (and higher).
Remember to grant the app the required consents and permissions before pairing so that it works properly. If you refuse, selected functions may not work properly or will be unavailable.

Data: Daily activity summary (number of steps, calories burned, distance travelled).
Training : Sport Modes. To start recording an activity, select it from the list, the recording of the exercise will start automatically. After ﬁnishing training, swipe right or press the function button(2) and press End to save the result. The data will be saved and will be available in the FitCloudPro application.
Heart rate: Heart rate function. The measurement starts automatically after entering the function. Swipe up to access measurement statistics.
Sleep: Information relating to your last sleep.
Blood pressure: Blood pressure monitor function. The measurement starts automatically after entering the function.
Blood oxygen: Pulse Oximeter Function. The measurement starts automatically after entering the function.
Messages: Latest notiﬁcations from the phone.
Weather: Get the latest weather information from FitCloudPro.
Female: It displays information about the menstrual cycle.
To activate the function, enter full user data in the FitCloudPro application (required gender: female).
Music: Music control function on the phone.
Stopwatch: Stopwatch function.
Timer: Timer function.
Alarm clock: Preview and switching on/off option for previously set alarms in the application.
Find phone: S martphone search function. It starts an acoustic signal on the phone.

Settings:

Menu style: Ability to change the style of the main menu.
Display: Display settings (change watch face, brightness, sleep and wake up the screen).
Battery: Information about the battery (current charge level and the ability to turn on the Save Mode).
Vibration intensity: Conﬁguration of the vibration intensity level.
Language: Ability to change the language of the smartwatch.
QR code: It displays the QR code of the dedicated application.
Password: Ability to switch on/off and conﬁguration of the password function on the smartwatch.
System: System information (device data, the ability to restore factory settings and switch off the smartwatch).

Depending on the software version of the device, the functions of the smartwatch described above may vary. In the event of any problems, we encourage you to contact our Technical Support Department: serwis@garett.pl

TAKING MEASUREMENTS

Make sure the sensor is in contact with the skin before starting the measurement. The area where the measurement is performed should be kept clean – dirt may have a negative effect on the result.
To start, go to the desired function in the smartwatch (Pulse, BP, or Blood oxygen). The measurement is started automatically and should take approximately 1 minute to get the optimal result.
Keep your body relaxed and still during the tests. Hold the device at the same height as your heart, do not speak during the test.

FITCLOUDPRO APP

Home
Displays the most important information about your activity and your health data from the current day.

Sleep: Data about your last sleep.
Heart Rate: Data about the recent heart rate measurements.
The START button begins remote measurement.
Blood pressure: Data about recent blood pressure measurements.
The START button begins remote measurement.
Oxygen: Data about recent blood oxygen saturation measurements.
The START button begins remote measurement.
Temperature: Data about recent temperature measurements.
The START button begins remote measurement.

Activity

The ability to remotely start recording of your chosen exercise.
To go to the Activity tab, press the icon on the main app screen. The next step is to select one of the available sport modes and automatically start recording the previously selected activity.
Dzięki aplikacji uzyskasz dostęp do With the app, you gain access to a screen with a preview of the currently recorded activity and the distance covered. There is the ability to open a map that will show you your current location and the route covered.
To ﬁnish recording the activity, press and hold Stop and then click Finish.
The result will be saved and available in the measurement history.

Device

The settings apply to the smartwatch and its functionalities.
Push Notifications: Select the notifications displayed on the watch.
Alarms: Turn on/off and configure the alarms activated on the watch.
Activity Reminder: The ability to turn on/off and configure inactivity notifications.
Drink Reminder: Hydration notification settings.
Dial library: The ability to change the appearance of the watch face.
Local dial: You can edit the theme of the current watch face.
Weather reports: Turn on/off the function of sending weather information to the smartwatch.
Raise to Wake: Settings for the function to wake the screen by raising your wrist.
Elevated Heart Rate Measurement: Increase the accuracy of the measuring sensor.
Automatic Health Monitor: Turn on/off the constant pulse monitoring function.
Find Watch: Function for finding the watch. Turning on this option will display a message and activate vibration on the smartwatch.
Wrist Preference: S elect the hand on which the watch is worn.
Hour Style: The ability to changethe time format to 12/24-hour.
Shake Photograph: Take photos by shaking the wrist on which you are wearing the watch.
Device version: Smartwatch software version.
Restore factory settings: The ability to reset the watch to factory settings.

Mine
The ability to configure and view personal data and settings related to the smartwatch user profile.

Google Fit: The ability to connect with Google Fit.
Exercise Goal: Define the daily goal for steps and calories burned.
Units: Configure the units of length, weight and temperature.
FAQ: Technical support.
Women’s Health: Configuremenstrual cycle reminders (available after entering the full user data (required gender: Female).
Settings: App login settings and the ability to update the smartwatch.
Suggestions: The ability to send suggestions about the app

TECHNICAL SPECIFICATIONS

GARETT 473926 Classy Smartwatch fig
15

More information about this device is available at www.garett.pl. Visit our website to see more products and accessories.

WARRANTY/CLAIMS

The product is covered by a 24-month manufacturer’s warranty. The warranty does not cover: defects and damage caused by the user or as a result of improper use (misuse), mechanical damage and damage resulting from using accessories and/or consumables other than those provided with the device. When lodging a complaint, ﬁll in the warranty card supplied with the device and send the device accompanied with proof of purchase to the address of the service centre provided on the warranty card.
Contact details are available on the website:
www.garett.eu

Manufacturer:
GARETT sp. z o.o. Targowa 18/1413 25 – 520 Kielce www.garett.eu

Proper disposal of the product (waste electric and electronic equipment)

As indicated by the marking on the product or in the related content, the device should not be disposed of with other household waste after the end of its service life. To avoid harm to the environment and human health as a result of uncontrolled waste disposal, please separate the product from other types of waste and recycle responsibly in order to promote reuse of material resources as a regular practice. For information about where and how to recycle this product in a way that is safe for the environment, household users should contact the retail outlet at which they purchased the product, or local authorities. Business users should contact their supplier and check the terms of the purchase agreement. Do not dispose of the product with other commercial waste.

www.garett.eu

Find us on: