GARETT Sport Tactic Smart Watch User Manual

GARETT Sport Tactic Smart Watch

User manual

Thank you for purchasing the Garett Sport Tactic smartwatch.

SAFETY ISSUES

• Before use, read this user manual carefully and keep it for further reference. The manufacturer shall bear no liability for any damage/injuries caused by improper use. Depending on the smartwatch batch, certain functions may differ from the functions described in this user manual.
• Using this device in the vicinity of medical devices may disrupt their operation. Users should pay special attention when using the smartwatch in the vicinity of medical devices such as pacemakers, hearing aids and other electronic medical devices.
• Do not dispose of the device in fire. There is a risk of battery explosion and resulting threat to life and health. :
• Done the vie from heats casern direct superstores, because it may cause electric shock or fire.
• Do not immerse the device in hot water.
• Do note or wire/earring, please stop using the product and contact the Garett service centres. Any attempts to make your own repairs may damage the device and result in invalidation of the warranty.
• The device should only be cleaned with a soft, slightly damp cloth.
• Do not use strong detergents or any other stimulants to clean the product.

Garett Sport Tactic is not a medical device. The smartwatch and the Da Fit app are not designed for medical diagnosis, treatment or as a preventive measure against illness or disease. You should seek medical advice first before changing your sleep and physical activity habits.

PRODUCT DESCRIPTION

1. Touchscreen
2. Function button (on/off/return/wake up/blank)
3. Sport modes button
4. Magnetic charging port|
5. Set of sensors
6. Interchangeable strap

INSTALLATION

Put the watch on your wrist and adjust the strap length so as to ensure it is not too loose.

OPERATION

Switch on/off To start the device, press and hold the function button (2) for approx. 5 seconds. To switch off, repeat the action and confirm switching off. In case when the smartwatch does not start up, try to charge it.

CHARGING

1. The smartwatch is charged using the magnetic cable supplied with the device.
2. Attach the end of the magnetic cable so that the contacts of the watch touch the contacts of the charging cable. Then connect the other end of the cable to the USB port of a computer or a USB power adapter. When it is connected properly, the charging animation will appear on the watch screen.

If there is no animation, make sure the watch is properly connected. When the battery is completely discharged, the animation may appear after several minutes. Before switching on the watch for the first time, it is recommended to charge it for about 2 hours. Charging voltage should not exceed 5V. The recommended charging current is maximum 1A.

INSTALLING

THE DA FIT APP The smartwatch works with your smartphone using the Da Fit app. Before use, you must first download the app from the Google Play Store or the AppStore and install it on your phone. You can search for the app by entering “Da Fit” in the store search engine or by scanning the relevant QR code provided below.

PAIRING
Garett Sport Tactic smartwatch does not require a permanent smartphone connection, but in order to fully enjoy the functions of the watch you need to pair it with the app.

Each time the smartwatch is turned on and paired with the app, the data synchronize automatically. The smartwatch measures and analyses certain user data in standby mode. Garett Sport Tactic has a set of sensors that monitor movement and the measurements taken in order to determine the details of sleep and physical activity.

Process of pairing

1.  Activate Bluetooth on your phone.
2. Make sure the smartwatch is switched on.
3. Open the Da Fit application, grant it all permissions and enter the smartwatch user data.
4.  Go to the Device tab, click Add Device, then select the device named K22.
5. When pairing, place the watch close to the phone you are pairing it with.
6. After successful pairing, the data will be fully synchronized.

The Garett Sport Tactic smartwatch works with smartphones that support Bluetooth 5.0 connectivity. It is also compatible with Android 4.4 (and newer) and iOS 8.0 (and newer).
Remember to grant the app the required consents and permissions before pairing so that it works properly. If you refuse, selected functions may not work properly or will be unavailable.

OPTIONAL PAIRING

If you want to use additional Bluetooth functions such as making voice calls with your smartwatch or synchronising your phonebook from your phone, you need to make an additional connection directly from your phone’s Bluetooth settings.

1. Switch on Bluetooth on your phone.
2. Activate the “Phone” function in the smartwatch settings: Swipe right while on the home screen to bring up the main menu. Then locate and select the Phone function – handset icon. Make sure that the battery level is not too low. Otherwise “Phone” will not be activated.
3. Once activated, the handset icon will light up green and the device will automatically begin pairing with your phone.
4. Express permission to pair your phone with the smartwatch,K22_XXXX” or if If automatic pairing does not work, search for it in the Bluetooth of your phone and connect to the device (XXXX – last 4 digits of the watch’s MAC address). Once connected, give your contacts sync permissions for Bluetooth

DISPLAY MENU

1. Main menu screen (there are several dozen watch faces to choose from, which can be found in the smartwatch settings or using the Da Fit app). You can return to the previous menu by pressing button (2) or swiping right. Swiping right displays the history of your last training session/daily activity summary/information about your last sleep, weather and basic device functions. Swiping up takes you to the menu containing information about the device, while swiping left takes you to the main menu.
2. Sports : Number of steps taken; distance covered.
3. Sleep : Duration of your last sleep.
4. Measure HR: Heart rate monitor. To take the measurement, touch the button in the Centre of the screen. You can stop the measurement in the same way.
5. Training: Sport modes. To enter the menu, touch the Centre of the screen. To start recording an activity, select it from the list. After a completed training session, swipe right and click Stop to record the result. After completing the activity, the results will be saved and displayed at the bottom of the home screen in the Da Fit app.
6. Phone: Your recent calls and the ability to dial a number after previously synchronizing the device with your phone. In order to use the Phone function properly, you need to give your consent for the additional connection of your watch to your phone, in order to synchronized contacts and calls. You should also grant the relevant permission to perform synchronization of contacts in the app/Bluetooth settings.
7.  Measure BP: Blood pressure monitor. To take the measurement, touch the Centre of the screen. You can stop the measurement in the same way.
8. Measure SPO2: Blood oxygen saturation meter. To take the measurement, touch the centres of the screen. You can stop the measurement in the same way.
9.  Weather: Weather information downloaded from the Da Fit app. It displays the current weather and the weather for the next day.
10. Shutter: Remote camera using the phone camera. Allows you to take a photo with a shake of the wrist. The camera is activated through the Da Fit app: My device> Camera.
11. Player: Control the music.
12. Others – Settings/Tools:
    • Stopwatch: Stopwatch function.
    • Alarm: Ability to set the alarm.
    • Countdown: Timer.
    • Brightness: Adjust the display brightness.
    • Phone: Turn on/OffSound.
    • Shake: Turn on/off vibrations.
    • Theater: Theater mode.
    • Reset: Restore the smartwatch to factory settings.
    •  Power off: Turn off the smartwatch.
    • About: Information about the device.
    • QR code: QR code for downloading the Da Fit app.
13. Young Bird: Arcade game.

TAKING MEASUREMENTS

• Make sure the sensor is in contact with the skin before starting the measurement. The area where the measurement is performed should be kept clean – dirt may have a negative effect on the result.
• To start, go to the desired function in the smartwatch (HR, BP, SpO2).
• The measurement is started by clicking anywhere on the screen and should take approximately 1 minute to get the optimal result. Keep your body relaxed and still during the tests. Hold the device at the same height as your heart, do not speak during the test.

Main page
It displays the most important information on activity and health data from the current day.

• Steps: Activity from the current day. In the options, you can view a summary of the last 7 days.
• Sleep: Data about your last sleep.
• Heart Rate: Data related to your  recent heart rate measurements. MEASURE button starts remote measurement.
• Blood pressure: Data on the most recent blood pressure measurements. MEASURE button starts remote measurement.
• Saturation: Data on the most recent saturation measurements. MEASURE button starts remote measurement.
• Running outdoors: Possibility to record activity and travelled route using the GPS module in the phone.
• Activity history: The activities saved using sport modes on the smartwatch will be displayed at the bottom of the home screen.

Device
Settings regarding the smartwatch and its functionality.

• Watch Faces: You can change the look of the watch face.
• Notifications: Select which notifications appear on the watch.
• Alarms: Switching On/Off and the configuration of alarm clocks activated on the watch.
• Shutter: Take photos by shaking the wrist on which the watch is placed.
• Others: Additional functions and settings for the watch.
• Upgrade: View the version of the smartwatch software and update it.

My device tab  Others
In this tab, you can view the settings related to the smartwatch.

• Find device: Watch search function, it activates a vibration alarm.
•  Time formats: Choose a 24/12- hour time format.
• Unit system: Select the measurement units.
• Do not disturb: Turn on/off watch vibrations for new notifications.
• Reminder to move: Turn on/off inactivity reminders.
• 24-hour heart rate measurement: Turn on/off automatic heart rate measurement.
• Language: Select the language of the smartwatch menu.
• Reset: Restore to factory settings.
• Quick view: Turn on/off the function of unlocking the screen with a hand gesture.
• Weather: Settings for the weather displayed on your watch.
• City : Ability to select a town/city in order to obtain more accurate measurements.

Drink Water Reminder tab
Settings related to notifications about hydration.

Physiological cycle reminder tab
Settings related to the physiological cycle.

• Physiological cycle reminder: Turn on/off the function.
• Cycle days: Select the number of days in the cycle.
• Menstrual days: Select the number of days of menstruation.
• Last menstrual start date: Start date of your last menstrual period.
• Reminder mode: Set reminders for the day before the menstrual and ovulation period, the day before peak ovulation and the end of the ovulation period.
• Reminder time: Select the time of the reminder.
• Physiological cycle calendar: With automatic indication of your menstrual period, predicted menstrual period and ovulation.

My
The ability to configure and view personal data and settings related to the smartwatch user profile.

• Profile: Data of the smartwatch user.
• Goal: Define the daily step goal.
• Health (iOS only): Connecting the app to Apple Health.
• Background guide protection (Android only): Instructions in case of a lack of notifications from the app.
• About: Information about the Da Fit app.

TECHNICAL SPECIFICATIONS

• Bluetooth: 5.0
• Processor: Realtek8762C
• Battery: 400 mAh
• Weight: 55 g
• Display: TFT 1,28″
•  Face dimensions: 51 x 55 x 10 mm
• interchangeable strap
• Waterproof: IP67
• Dedicated app: Da Fit
• Warranty: 24 months

More information about this device is available at www.garett.pl. Visit www.garett.pl to see more products and accessories.

WARRANTY/RETURNS

The product is covered by a 24-month manufacturer’s warranty. The warranty does not cover: defects and damage caused by the user or as a result of improper use (misuse), mechanical damage and damage resulting from using consumables or accessories other than those provided with the device. When submitting a claim, fill in the warranty card supplied with the device and send the device along with proof of purchase to the address of the service Centre provided on the warranty card.

Contact details are available on the website:
www.garett.eu

Manufacturer

GARETT sp. z o.0.
Targowa 18/1413 25 – 520 Kielce www.garett.eu

Correct disposal of the produce (waste electrical and electronic equipment)

As indicated by the marking on the product or in the related text, the device should not be disposed of with other household waste after the end of its service life. To avoid harm to the environment and human health as a result of uncontrolled waste disposal, please separate the product from other types of waste and recycle responsibly in order to promote reuse of material resources as a regular practice. For information about where and how to recycle this product in a way that is safe for the environment, household users should contact the retail outlet in which they purchased the product, or local authorities. Business users should contact their supplier and check the terms of the purchase agreement. Do not dispose of the product with other commercial waste.

www.garett.pl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>