socket Charging Stand User Guide

: June 7, 2024
: Socket

Table of Contents

socket Charging Stand
PACKAGE CONTENTS
- PRODUCT INFORMATION
ATTACHING THE SECURITY CABLE
- INSERTING THE POST TO THE BASE
- CHARGING STAND OPERATIONS
COMMAND BARCODES
AUTO SCAN MODE
- How Auto Scanning Mode Works in the Stand or Dock
- How the Scanner reverts to Manual Mode (Not in the Stand)
PRODUCT SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

socket Charging Stand

product

PACKAGE CONTENTS

PRODUCT INFORMATION

Illuminates Red when connected to AC Power.

ATTACHING THE SECURITY CABLE

Security cable comes Pre-installed for your convenience. To remove, follow step 2 and step 1.

INSERTING THE POST TO THE BASE

Insert the post into the top of the base, lining up the marker on the post to the unlock icon. Push down and turn the post towards the lock icon until you hear a click. Run the USB cord through the channel at the bottom of the base.

CHARGING STAND OPERATIONS

The charging pins must align to supply power to the scanner. The red light will illuminate and the scanner will beep twice.

When set to Auto Scan with Socket Mobile’s 2D barcode scanners (D740, D745, D750, D755, D760, S740, S760), the barcode should be 4 to 8 inches away.

OPTIONAL TABLE MOUNTING

Two keyholes are provided on the Charging Stand base for an optional installation on a wooden surface (screws and drill template included).

Place the Charging Stand on the drill template and position these in the desired location. Rotate the Charging Stand to align with the solid notch (not the dotted notch) on the template.
Rotate the Stand/template combination so the Socket Mobile logo faces the direction you want the scanner to aim.
Tape the template to the surface and remove the Charging Stand.
Drill two 3/32” holes through the drill marks on the template.
Tighten the two screws with about 1/4” of the screw head exposed.
Place the Charging Stand on the template aligned with the dotted notch.
You can now tear away the template.
Twist the Charging Stand clockwise to lock the screws in the keyholes.

COMMAND BARCODES

Charging Stand Modes

Auto Scan
Scan the barcode to enable Auto Scan. This will allow the scanner to automatically scan barcodes without pressing the scan button.| #FNB 41FBA50003#
Manual Mode – Normal (default)
Scan the barcode to configure the scanner back to normal. It will be in manual scan mode even when placed in the stand or cradle.| #FNB 41FBA50000#
Charging Stand Modes

Stand Mode
Scan the barcode to configure the scanner is permanently in Auto Scan mode,
regardless whether it is connected to power or not.| #FNB 41FBA50001#

This mode will drain the battery faster if not connected to power.

Scan command barcode to place your scanner in Auto Scan.
Note: Turn off host device’s Bluetooth before scanning command barcode.
Once the scanner is in Auto Scan, it will switch to automatic scanning when it detects power coming from the charging pins of the Dock or Stand. Place a barcode in the scanners field of view and the scanner will automatically scan it.

AUTO SCAN MODE

How Auto Scanning Mode Works in the Stand or Dock

Action

| ****

Behavior

| Notification
---|---|---
Beep Pattern| Light Activity| Vibrate
Place Scanner in the Stand| Scanner switches to Auto Scan Mode| High-high tone confirms proper seating*| Battery Status Light is Disabled| None
Place a barcode in the Scanners Field of View| Decode barcode| 1 Beep when Data successfully scanned| Green Light blinks (while scanning)| None

How the Scanner reverts to Manual Mode (Not in the Stand)

Action

| ****

Behavior

| Notification
---|---|---
Beep Pattern| Light Activity| Vibrate
Remove the Scanner from the Stand and press the scan button| Scanner switches to Manual Mode| None| Battery Status Light is Enabled| Enabled
Press the scan button| Decode barcode| 1 Beep when Data successfully scanned| Green Light blinks (while scanning)| Vibrate when Data successfully scanned

Auto Scanning Mode: Barcodes placed in the Scanner’s field of view are automatically scanned.
Manual Mode (default): Pressing the scan button initiates a scan.

PRODUCT SPECIFICATIONS

Dimensions

HELPFUL RESOURCES

Technical Support and Product Registration: support.socketmobile.com
Phone: 800-279-1390 +1-510-933-3020 (worldwide)
Warranty Checker: socketmobile.com/warranty-checker
Socket Mobile Developer Program: socketmobile.com/developer
Download Socket Mobile’s scanner User Guide and Command Barcodes at socketmobile.com/downloads

COMPLIANCE STATEMENT

The unit under test was found compliant with all the applicable Directives, 2004/108/EC and 2006/95/EC.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
The WEEE directive places an obligation on all EU-based manufacturers and importers to take-back electronic products at the end of their useful life.
ROHS STATEMENT OF COMPLIANCE
This product is compliant to Directive 2011/65/EU.
NON-MODIFICATION STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance.