GARETT ELECTRONICS 2022 Garett Street Style User Manual
- June 13, 2024
- GARETT Electronics
Table of Contents
GARETT ELECTRONICS 2022 Garett Street Style
SAFETY ISSUES
Before use, read this user manual carefully and keep it for further reference. The manufacturer shall bear no liability for any damage/injuries caused by improper use. Depending on the smartwatch batch, certain functions may differ from the functions described in this user manual.
- Using this device in the vicinity of medical devices may disrupt their operation. Users should pay special attention when using the smartwatch in the vicinity of medical devices such as pacemakers, hearing aids and other electronic medical devices.
- Do not dispose of the device in fire. There is a risk of battery explosion and resulting threat to life and health.
- Protect the device from heat sources and direct sunlight.
- Do not immerse the device in hot water.
- Do not dive while wearing the device.
- Do not usethe device if damaged.
- In case of any damage, take the device to an authorised service centre for inspection/repair. Any attempts to make your own repairs may damage the device and result in invalidation of the warranty.
- The device should only be cleaned with a soft, slightly damp cloth.
- No chemicals or detergents should be used for this purpose.
Garett Street Style is not a medical device. Smartwatch and the Da Fit app are no designed for medical diagnosis, treatment or as a preventive measure agains illness or disease. You should seek medical advice first before changing your sleer and physical activity habits.
PRODUCT DESCRIPTION
- Touchscreen display
- On/off/back to watch face button
- Quick start training/back to previous view button
- Strap
- Set of sensors
INSTALLATION
Put the watch on your wrist and adjust the strap length so as to ensure it is
not too loose.
OPERATION
Turning on/off
Press and hold the on/off button (2) to turn the device on. To turn the device
off, go to Setting>Power off in the menu and press and hold the touch button.
Note: Before the first use, make sure that the smartwatch is connected to
the app.
The device will automatically synchronise the time, and the physical activity
data will be saved correctly.
CHARGING
- The smartwatch is charged using the magnetic cable supplied with the device.
- Attach the magnetic end so that the contacts of the watch touch the contacts of the charging cable. Then connect the other end of the cable to the USB port of a computer or a USB power adapter.
Note: In case the smartwatch does not start – try charging it. Place the device stably on a flat surface. The magnetic tip must adhere to the contacts. The first charge should take about 1-2 hours. In the case of a discharged watch, charging can start even after a few minutes – the start of charging is signalled by the wake-up ofthe smartwatch screen
INSTALLING JYOUPRO APPLICATION
The smartwatch works with your smartphone using the JYouPro app. Before use,
you must first download the app from the Google Play Store or the AppStore and
install it on your phone. You can search for the app by entering “‘YouPro” in
the store search engine or by scanning the relevant QR code provided below
.
PAIRING
Note: Smartwatch Garett Street Style does not require a permanent
smartphone connection, but in order to fully enjoy the functions of the watch
you need to pair it with your smartphone using the app. Before the first use,
you need to enter your user data in the app.
Note: Every time you turn on the smartwatch and the app, the data
synchronise automatically (the devices must be paired!)
The smartwatch measures and analyses data on physical activity and sleep in
standby mode. Smartwatch Garett Street Style is equipped with an accelerometer
(G-sensor) that monitors your body movements and processes them based on
algorithms that allow you to determine the details of your sleep and physical
activity.
- Turn on Bluetooth on your phone.
- Make sure that the smartwatch is on.
- Open the JYouPro app.
- Enter the Device tab at the bottom of the screen, then select the Scan device option and select the device named S30.
- When pairing, place the phone and the smartwatch close to each other.
- After successful pairing, the time on your watch will be updated.
Note: Smartwatch Garett Street Style sports watch works with smartphones
that support Bluetooth 5.0. It is also compatible with Android 5.1, iOS 8 (and
higher).
Before pairing, remember to grant the app the required permissions and
permissions to function properly. If you refuse, selected features of the app
may not work properly or will be unavailable.
DISPLAY MENU
- Main menu screen (there are five watch faces to choose from, which can be found in the smartwatch settings by pressing and holding the home screen of the watch). You can return to the previous menu by pressing button (2/3) or swiping right. Swiping right on the main menu shows you the recent notifications history, while swiping left shows you the training session history/daily activity summary/current heart rate/information about sleep/sport mode/music control/weather. Swiping up/down takes you to the main menu.
- Step: Number of stepstaken.
- Message: Recent messages.
- HR: Heart rate measurement function.
- SPO2: Blood oxygen saturation measurement function.
- BP: Blood pressure measurement function.
- Setting: Smartwatch settings.
- Sport: Several sports activities to choose from. The steps taken, distance covered and calories burned will be included in the activity statistics of the current day.
- Weather: Weather information.
- Search Phone: Triggers an alarm on the phone.
- Music: Control the music.
- Display Time: Set the watch backlight time.
- Brightness: Set the watch brightness
- Stopwatch: Stopwatch.
- Dial: Select the watch face theme.
- Breathing: Breathing exercises
- Language: Select and synchronise the language.
Heart rate measurement, comments:
To begin heart rate/blood pressure/oxygen saturation measurement on the watch,
go to the selected function and wait for the results to appear. Before you
start the measurement, make sure that the sensor is touching the skin. The
measurement area should be kept clean: dirt may adversely affect the result.
Keep your body relaxed and still during tests. Hold the device at the same
height as your heart; do not speak during the test. The measurement should
take at least 1 minute to obtain an optimal result.
JYOUPRO APP
-
Home screen
The following tabs are located on the app home screen:
- Walk: Shows activity statistics from the current day. Clicking on the bottom half of the screen displays reports from previous time periods.
- Sleep: Shows information about the quality of your last sleep Clicking on the bottom half of the screen displays reports from previous time periods.
- Pulsometer: The result of the last pulse measurement is displayed at the top of the screen. Clicking Start remotely starts the measurement. Clicking on the lower half of the screen displays reports from previous periods.
- Blood Pressure: The top half of the screen displays the result of the last blood pressure measurement. Clicking Start remotely starts the measurement Clicking in the lower half of the screen displays reports from previous periods.
- Me: Configures the wristband user-related settings.
-
Exercise tab
Records the selected activity and the route covered using the phone’s GPS. If you click on the icon in the top right corner, it shows the previously recorded activities. For the function to work, the app must have permanent access to GPS.
-
Device tab
A settings menu that allows you to: change the watch settings, search for devices, adjust the device settings, update the app/software, and obtain information about the version.
- Call notifications: Turn on/off call notifications.
- SMS notifications: Turn on/off notifications about text messages.
- App notifications: Select the apps for which notifications will be displayed on your watch.
- Alarm: Configure the alarm activated on the smartwatch.
- Inactivity reminder: Turn on/off and configure inactivity notifications.
- Hydration reminder: Turn on/off and configure the reminder.
- Medication reminder: Turn on/of and configure the reminder.
- Camera control: Remote camera function using the phone camera with the smartwatch.
- More settings:
- Find device: Watch search function; it activates a vibration alarm.
- Factory reset: Restore the device to factory settings.
- Power saving mode: Configure the power saving function.
- If you turn on the Silent mode option, no new notifications will be displayed on the smartwatch.
- Device update: Smartwatch software update function.
- Automatic heart rate test: Turn on/off and configure automatic heart rate measurements.
- Time format: Choose a 12-hour or 24-hour time format on the device.
- Disconnect device: Disconnect the watch from the app.
-
Me tab
Configure settings related to the watch user.
- Clicking on the portrait icon allows you to set the following data: gender, date of birth, height, weight.
- Step goal: Daily step goal.
- Units: Select the measurement units.
- Google Fit: Ability to connect to Google Fit.
- User manual:
- FAQ: Frequently asked questions.
- Manual: Short user manual.
- Background: Instructions on how to enable/disable apps running in the background.
- Message: Instructions on how to turn on/off notifications.
- About: Information about the app version.
TECHNICAL SPECIFICATIONS
- Bluetooth: 5.0 (transmission range up to 10 metres)
- Processor: Dialog14683
- Battery: 200 mAh
- Weight: 50 g
- 1.28″ IPS display
- Dimensions of the watch face: 44 x 44 x 11 mm
- Waterproof: IP67
- Interchangeable rubber strap
- Dedicated app: JYouPro
- Warranty: 24 monthse
More information about this device is available at www.garett.pl. Visit www.garett.pl to see more products and accessories.
WARRANTY/RETURNS
The product is covered by a 24-month manufacturer’s warranty. The warranty
does not cover: defects and damage caused by the user or as a result of
improper use (misuse), mechanical damage and damage resulting from using
consumables or accessories other than those provided with the device. When
submitting a claim, fill in the warranty card supplied with the device and
send the device along with proof of purchase to the address of the service
centre provided on the warranty card.
Contact details are available on the website:
www.garett.eu
Manufacturer:
GARETT sp. z 0.0.
Targowa 18/1413
25 – 520 Kielce
www.garett.eu
Asindicated by the marking on the product or in the related text, the device
should not be disposed of with other household waste after the end of its
service life. To avoid harm to the environment and human health as a result of
uncontrolled waste disposal, please separate the product from other types of
waste and recycle responsibly in order to promote reuse of material resources
as a regular practice. For information about where and how to recycle this
product in a way that is safe for the environment, household users should
contact the retail outlet in which they purchased the product, or local
authorities. Business users should contact their supplier and check the terms
of the purchase agreement. Do not dispose of the product with other
commercialwaste.
www.garett.pl
Visit us:
Documents / Resources
|
GARETT ELECTRONICS 2022 Garett Street
Style
[pdf] User Manual
2022 Garett Street Style, 2022, Garett Street Style, Street Style
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>