AVPro edge AC-DA14-AUHD Distribution Amplifier with advanced EDID management User Manual

AC-DA14-AUHD Distribution
Amplifier with advanced EDID management
User Manual Distribution Amplifier with advanced EDID management
**Available in 1×2, 1×4, and 1×8

Introduction

AC-DA14-AUHD is an 18GBPS, full bandwidth HDMI2.0a (HDR) with HDCP2.2 four-way HDMI splitter. Functionally, distributes the input HDMI signal to four identical  HDMI outputs. These four outputs are synchronized.
AC-DA14-AUHD has the ability of pre-emphasis and equalization. Multiple cascaded AC-DA14-AUHD achieves long distance transmission of HDMI signal of more than 15  meters even in 4K (HDR) resolution.
AC-DA14-AUHD offers solutions for usage as a component of digital HDMI distributions and entertainment systems also UHDTV/4K retail and general show sites. Use in  conjunction with UHDTV, UHD Projector, STB, UHD-BD, UHD Media Player and in environment where noise, space and security are concerns. Fits perfectly in data  center control rooms, information distribution premises, conference and presentation rooms, school educational facilities and corporate training environments.

Full 4K 60 (4:4:4) HDMI Splitter & Distribution Amplifier

• Product Overview ( Model Number: AC-DA14-AUHD)

![AVPro edge AC DA14 AUHD Distribution Amplifier with advanced EDID management

• fig](https://manuals.plus/wp-content/uploads/2023/01/AVPro-edge-AC-DA14 -AUHD-Distribution-Amplifier-with-advanced-EDID-management-fig.png)

Features

• Easy to Use: Install in seconds, no need for setting.
• Distribution: One HDMI input, four identical HDMI outputs.
• Supports up to 18GBPS with resolutions of 4K60(YUV444), 4K30, 1080p, 1080i, 720p and other standard Video formats, PAL and NTSC.
• Customer can configure EDID function to enable the best compatibility.
• Supports HDCP2.2
• HDMI 2.0(a) w/ HDR.
• Mounting ears are included for easy fixation on wall, furniture or ceiling.

Notice
AVProEdge reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.

Warning
To reduce the risk of fire, electric shock or product damage:

Package Contents

1. Main unit. P/N: AC-DA14-AUHD
2. 5VDC Power Supply.
3. Mounting Brackets

Connections and Operations

1. Connect the HDMI input source into AC-DA14-AUHD
2. Connect the HDMI output equipment (Displays) into AC-DA14-AUHD
3. Insert the DC side of 5v power supply into AC-DA14-AUHD and then connect the AC side of the Power supply into the wall outlet.
4. Plugging in the unit automatically powers up the device.

NOTE: Insert / Extract cables gently.

![AVPro edge AC DA14 AUHD Distribution Amplifier with advanced EDID management

• fig 2](https://manuals.plus/wp-content/uploads/2023/01/AVPro-edge-AC-DA14 -AUHD-Distribution-Amplifier-with-advanced-EDID-management-fig-2.png)

Specifications

VIDEO:|
---|---
VIDEO RESOLUTIONS| UP TO 4K 60HZ 4:4:4
VESA RESOLUTIONS| UP TO DCI 4K (4096X2160) 5K (UP TO 5120X3200
HDR FORMATS/RESOLUTIONS| 420. 422. 444 (10 AND 12 DEEP COLOR)
NORIO, HDR10+. DOLBY VISION, HLG
COLOR SPACE| YUV (COMPONENT). RGB
(CSC: REC. 601. REC. 709. BT2020. DCI. P3 06500)
CHROMA SUBSAMPELING| 4:4:4. 4:2:2, 4:2:0 SUPPORTED
DEEP COLOR| UP T016 BIT (1080P) UP TO 12 BIT (4K)
AUDIO:|
AUDIO FORMATS SUPPORTED HMI| PCM 2.0 CH. LPCM 5.1 & 7.1. DOLBY DIGTAL. DTS 5.1. DOLBY DIGITAL PLUS, DOLBY TRUEHD. DTS-HD MASTER AUDIO, DTS-X. DOLBY ATMOS
NISTANCE:|
DISTANCE 1080P| UP TO 50 FEET (USING BULLET TRAIN HMI)
DISTANCE 4K & NOR| UP T0130 FEET (USING BULLET TRAIN AOC)
OTHER:|
BANDWIDTH| 18 GBPS
HDCP| HDCP 2.2 AND EARLIER
PORTS:|
HMI| TYPE A
FIRMWARE| MINI USB
ENVIRONMENTAL:|
OPERATING TEMPRATURE| 23 TO 125’F (-5 TO 51t)
STORAGE TEMPERATURE| -4 TO 140°F (-20 TO 60°C)
HUMIDITY RANGE| 5-90°5 RH (NO CONDENSATION)
POWER:|
POWER CONSUMPTION (TOTAL)| 4 WATTS MAX
POWER SUPPLY| INPUT: AC 100-240V – 50/60HZ OUTPUT: DC 5V 2A
DIMENSIONS:|
DIMENSIONS (SINGLE UNIT ONLY. TX OR RX ARE SAME) (LENGTH/WIDTH/HEIGHT) (TX OR RX EACH ALONE)| MM: 16.764 X 85.725 X 14.526 INCH: .66 X 3.375 X 5.69
DIMENSIONS (PACKAGED LENGTH/WIDTH/HEIGHT) (KIT)| MM: 76.2 X 180.975 X 304.8 INCH: 3 X 7.125 X 12
WEIGHT (UNIT)| 0.57LBS (0.26KG)
WEIGHT (PACKAGED)| 1.21185 (0.55KG)
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. MASS & DIMENSIONS ARE APPROXIMATE

Back Panel

![AVPro edge AC DA14 AUHD Distribution Amplifier with advanced EDID management

• fig 3](https://manuals.plus/wp-content/uploads/2023/01/AVPro-edge-AC-DA14 -AUHD-Distribution-Amplifier-with-advanced-EDID-management-fig-3.png)

  1. Power input.
  2. HDMI input.
  3. HDMI outputs (x4).

Device Top Cover

Device cover is labeled for DIP Switch (EDID setting) and ISP mini USB port and for easy HDMI port recognition especially useful when Mounting Ears are used for fixation.
NOTE: DIP Switch EDID setting index on next page.

EDID Settings: The 5 DIP switches are located on the side of the device, and each switch has two settings, 0 & 1 (UP=0, DOWN=1). The default mode is “00000” which is all up, in this mode the device copies the EDID from the sink (display) plugged into OUTPUT 1.

EDID DIP Settings:

When Changing EDIDs, please follow the steps below

1. Start with power off
2. Set DIP to ‘00000’ (all up).
3. Power on the unit
4. Power on the source device and connect the HDMI input port.

Note1: EDID Copy mode: EDID will be copied from sink on OUTPUT 1. The AC- DA14-AUHD is set this way by default for maximum “Plug & Play” Compatibility. If  you change sink (Display) plugged into OUTPUT 1, please follow the steps below if you wish to use the new sink’s EDID.

1. Start with power off
2. Set DIP to ‘00000’ (all up).
3. Power on the unit
4. Power on the source device and connect the HDMI input port.

![AVPro edge AC DA14 AUHD Distribution Amplifier with advanced EDID management

• fig 5](https://manuals.plus/wp-content/uploads/2023/01/AVPro-edge-AC-DA14 -AUHD-Distribution-Amplifier-with-advanced-EDID-management-fig-5.png)

Maintenance

To ensure reliable operation of this product as well as protecting the safety of any person using or handling this device while powered, please observe the following instructions.

• Use the power supplies provided. If an alternate supply is required, check voltage, polarity and that it has sufficient power to supply the device it is connected to.
• Do not operate these products outside the specified temperature and humidity range given in the above specifications.
• Ensure there is adequate ventilation to allow this product to operate efficiently.
• Repair of the equipment should only be carried out by qualified professionals as these products contain sensitive components that may be damaged by any mistreatment.
• Only use this product in a dry environment. Do not allow any liquids or harmful chemicals to come into contact with these products.
• Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.

Damage Requiring Service

• The DC power supply cord or AC adaptor has been damaged
• Objects or liquids have gotten into the unit
• The unit has been exposed to rain
• The unit does not operate normally or exhibits a marked change in performance
• The unit has been dropped or the housing damaged

The unit should be serviced by qualified service personnel if:

Support
Should you experience any problems while using this product, first, refer to the Troubleshooting section of this manual before contacting Technical Support. When calling,  the following information should be provided:

• Product name and model number
• Product serial number
• Details of the issue and any conditions under which the issue is occurring

Warranty
If your product does not work properly because of a defect in materials or workmanship, AVProEdge (referred to as “the warrantor”) will, for the length of the period  indicated as below, (Parts/Labor (10) Years), which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new  or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase  date is required for Limited Warranty service.

This warranty extends to products purchased directly from AVPro or an authorized dealer. AVPro is not liable to honor this warranty if the product has been used in any application other than that for which it was intended, has been subjected to misuse, accidental damage, modification or improper installation procedures, unauthorized repairs  or is outside of the warranty period. Please direct any questions or issues you may have to your local dealer before contacting AVPro.

Troubleshooting

• Verify Power – Front Panel Pg.8

  • Try power-cycling the device while all cables are connected

• Verify Connections – Front Panel Pg.8

  • If the lights are not showing a connection, try Hot Plugging the cable (remove and re-insert while powered up)

• Possible EDID issue. Default out of the box is EDID Copy from downstream device.
  Try one of the Canned EDIDs built in – Pg.10

• Lights showing correct connecting but still no picture. Try the last EDID option (all down), this will force what ever signal is going in, out – Pg.11

• 1080p signal working but not 4k – Verify all connected devices are 4k capable.

• Still having issues, contact us

  • Support Direct +1-605-977-3477
  • All inquiries +1-605-274-6055
  • Submit a support request ticket

• https://support.avproedge.com/hc/en-us/requests/new

Thank you for choosing AVProEdge!
Please contact us with any questions. We are happy to be of service!

AVProEdge
2222 E 52nd St N ~ Sioux Falls, SD 57104
1-877-886-5112 ~ 605-274-6055
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>