AVPro edge AC-DAC-COTO Digital to Analog Audio Converter User Manual

AVPro Edge AC-DAC-COTO Digital to Analog Audio Converter

AVProEdge ~ 2222 E 52nd Street N Sioux Falls, SD 57104~1.877.886.5112 ~ +1.605.274.6055 ~ support@avproedge.com

DISCLAIMERS

AVPro Global assumes no responsibility for any inaccuracies that may be contained in this document. AVPro Global also makes no commitment to update or to keep current the information contained in this document. AVPro Global reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:

REVISION HISTORY

Introduction

The Digital to Analog Audio Converter is an easy-to-use product that converts Coaxial or Optical audio signals into analog Stereo (L/R) audio. It can be easily switched between either Coaxial or Optical inputs. Its compact, elegant design and simple LED input status make it easier for users to connect and use it instantly.

Applications

Source equipment such as a DVD/Blu-ray player or an HDTV and output to active speakers or amplifier with connection cables.

Package Contents

• Digital to Analog Audio Converter unit
• 5V DC Power Supply
• User Manual

System Requirements

No special requirements are needed.

Features

• Converts digital coaxial or optical audio signals to analog stereo audio (L/R)
• Easily switch between coaxial or optical inputs
• Compact and elegant design
• Simple LED input status indication

Operation Controls and Functions

Top Panel

N/A

Front Panel

• Power Indicator LED
• Input Selector Switch (Coaxial/Optical)
• Input Status LED

Rear Panel

• DC 5V Power Input Jack
• Coaxial Input Jack
• Optical Input Jack
• Analog Stereo Output Jacks (L/R)

Left Panel

N/A

Connection Diagram

Connect the source device’s coaxial or optical audio output to the corresponding input jack on the converter. Connect the converter’s analog stereo output jacks to the active speakers or amplifier with connection cables.

Specifications

• Input: Coaxial or Optical Digital Audio Signal
• Output: Analog Stereo Audio (L/R)
• Power Supply: DC 5V/1A
• Power Consumption: 0.5W (Max.)
• Dimensions: 66mm x 60mm x 20mm
• Weight: 40g

Acronyms

• DAC: Digital to Analog Converter
• L/R: Left/Right Stereo Audio Channels
• HDTV: High-Definition Television
• LED: Light Emitting Diode

For further information or assistance, please contact AVProEdge support.

AVProEdge ~ 2222 E 52nd Street N Sioux Falls, SD 57104~ 1.877.886.5112 ~

+1.605.274.6055 ~ support@avproedge.com

DISCLAIMERS

AVPro Global assumes no responsibility for any inaccuracies that may be contained in this document. AVPro Global also makes no commitment to update or to keep current the information contained in this document.
AVPro Global reserves the right to make improvements to this document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from AVPro Global Hldgs.
© Copyright 2017 by AVPro Global Hldgs.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

REVISION HISTORY

INTRODUCTION

The Digital to Analog Audio Converter is an easy to use product that converts Coaxial or Optical audio signals into analog Stereo (L/R) audio. It can be easily switched between either Coaxial or Optical inputs. With its compact, elegant design and simple LED input status make it easier for users to connect up and use instantly.

APPLICATIONS

• HDTV digital output conversion
• 24-bit DAC conversion

PACKAGE CONTENTS

• 1×Digital to Analog Audio Converter
• 1×5V/1.2A DC Power Adaptor
• 1×Operation Manual

SYSTEM REQUIREMENTS

Source equipment such as a DVD/Blu-ray player or an HDTV and output to active speakers or amplifier with connection cables.

FEATURES

• Supports digital audio input (Coaxial/Optical) and stereo analog audio output (L/R)
• Integrated digital interpolator filter and Digital Analog Converter (DAC)
• Supports uncompressed digital stereo audio input
• Supports S/PDIF audio at 192kHz/24-bit data for conversion to left and right analog channels
• Compact size and easy to install

OPERATION CONTROLS AND FUNCTIONS

Top Panel

Optical & Coax LEDs: These LED lights will illuminate according to which input is currently selected.

Front Panel

L/R Out: Analog stereo output. Connect to the input of your audio device or display.

Rear Panel

• Coax In: Connect to the Coaxial digital audio source, such as a DVD player or CD player.
• Optical In: Connect to the Optical audio source, such as a Blu-ray player or games console.

Left Panel

1. Coax/Optical Switch: Select which digital audio input is active and will be converted to analog stereo (L/R) audio.
2. DC 5V: Connect the 5V DC power supply to the unit and plug the adaptor into an AC wall outlet.

CONNECTION DIAGRAM

SPECIFICATIONS

• Input Ports 1× TOSLINK (S/PDIF Audio)
  • 1×RCA (S/PDIF Audio)
• Output Ports 2×RCA (Stereo Audio)
• Input Audio Format LPCM 2.0
• Output Audio from Analog 2.0
• Input Sampling Rates 32kHz, 44.1kHz, 48k Hz, 88.2kHz,96kHz, 176.4kHz &192kHz
• Output Leve l 2Vrms
• Output Impedance 600Ω
• Power Supply 5V/1.2A DC (US/EU standards, CE/FCC/UL certified)
• ESD Protection Human Body Model: ±12kV (Air Discharge) ±8kV (Contact Discharge)
• Dimensions 46mm×22.5mm×45.5mm(W×H×D) [Case Only] 56mm×22.5mm×46mm(W×H×D) [All Inclusive]
• Weight 30g
• Chassis Material Plastic
• Silkscreen Color White
• Operating Temperature 0°C – 40°C/32°F – 104°F
• Storage Temperature −20°C – 60°C/−4°F – 140°F
• Relative Humidity 20 – 90% RH (Non-condensing)
• Power Consumption 0.74W

ACRONYMS

ACRONYM           COMPLETE TERM

DAC| Digital to Analog Conversion
LPCM| Linear Pulse-Code Modulation
S/PDIF| Sony/Philips Digital Interface Format

• Thanks you and make sure to check outwww.AVProEdge.com to find all our new products and latest specials
• From all your friends here at AVPro:
• Happy Installing
• AVProEdge ~ 2222 E 52nd Street N Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~support@avproedge.com

References

• AVPro Edge

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>