AVPro edge AC-EX70-444-TNE Ultra Slim 70m 4K60 HDR HDBaseT Extender User Guide
- October 30, 2023
- AVPro edge
Table of Contents
Ultra Slim 70m (100m HD) 4K60
4:4:4, HDR HDBaseT Extender
ac-ex70-444-TNE
User Guide
AC-EX70-444-TNE Ultra Slim 70m 4K60 HDR HBase Extender
AVPro Edge’s 70-meter 4K transmitter can support long-distance runs of high
bandwidth data signals over standard category cable. Professional AV
installers will use this device anytime they need to send HDMI signals long
distances. This device will convert the HDMI signal into an HDBaseT type that
distributes uncompressed video data through walls and underground to areas
that are not easily reached.
This device works perfectly with any HBase TV, projector, or AVR, but even
more so works with Avapro Edges scaling HBase Receiver (AC-EX70-SC2-R). When
paired together you are in full control of the video signals that are passing
through, you can input a full 4K60 signal, but scale it to a standard 720p for
legacy TVs and projectors.
This transmitter uses ICT Technology to fit the full 4K60 (4:4:4) signal over
a single piece of category cable, we do this by lightly compressing any signal
over 10.2Gbps to fit through the category pipeline. Because this compression
is engineered to not affect the picture quality, you have a near-lossless
image on the screen.
CONNECTION DIAGRAM
product specifications
VIDEO :
VIDEO Resolute Talons| UP TO 4K 60HZ 4:4:4
VESA Resolute loans| UP TO DCI 4K (4096X2160)
HDR FORMATs/Resolution’s| “420, 422, 444 (10 AND 12 DEEP COLOR) HDR10, HDR10+,
HLG”
COLOR SPACE| “YUV (COMPONENT), RGB (CSC: REC. 601, REC. 709, BT2020, DCI, P3
D6500)”
CHROMA Subsampling| 4:4:4, 4:2:2, 4:2:0 SUPPORTED
DEEP COLOR| UP TO 16 BIT (1080), UP TO 12 BIT (4K)
Audley:
Audley FORMATs SUPPORTED HDMI| PCM 2.0 CH, LPCM 5.1 & 7.1, DOLBY DlglTAL, DTS
5.1, DOLBY DlglTAL PLUs, DOLBY TRUEHD, DTS-HD Masters Audley, DTS-X, DOLBY
ATMOs
Audley FORMATs SUPPORTED EXTRACTED| PCM 2 CH (NO Downmix)
Distanced:
HBase (CAT) Transmits Distanced (4K)| 70M (230 FEET)
HBase (CAT) Transmits Distanced (FULL HD)| 100M (330 FEET)
HDMI LEAD IN (UP TO 4K60 4:4:4)| UP TO 50 FEET (Using BULLET TRAIN HDMI)
HDMI LEAD IN (W/ AOC CABLE) (UP TO 4K60 4:4:4)| UP TO 130 FEET (Sung BULLET
Tran AOC)
OTHER:
Bandwidths| 18 GBPs (W/ ICT)
HDCP| HDCP 2.2 AND Earle
PORTS:
HDMI (inputs)| TYPE A
Audley (EXTRACTED Analog) (OUTPUT)| 3 PIN Terminal BLOCK (UNBALANCED)
IR RX (inputs/OUTPUT)| 3.5MM STEREO (3 CONDUCTOR)
RS232| 3 PIN Terminal BLOCK
Environmental:
Operating TEMPRATURE| 23 TO 125°F (-5 TO 51°C)
Storage TEMPERATURE| -4 TO 140°F (-20 TO 60°C)
Humidly Ranged| 5-90% RH (NO Condensation)
POWER:
POWER Consumption (TOTAL)| 9 WATTs MAX Pal
POWER SUPPLY| “INPUT: AC 100-240V ~ 50/60HZ OUTPUT: DC 48V .5A (WALL Version)
“
Dimension’s:
Dimension’s| “MM: 132 X 100 X 18 NCH: 5.19 X 3.94 X .69”
Dimension’s (Packaged Length/Width/Hight) (KIT)| “MM: 137 X 194 X 45 NCH:
5.38 X 7.62 X 1.75”
Wight (UNIT)| .5LBs (.23Kg)
Wight (Packaged)| 1LBs (.45Kg)
*Specification’s subject TO Change WlTHOUT Noticed. MAs & Dimension’s ARE Approximated
Full Feature Set
- HDMI 2.0(a/b)
- 18Gbps Bandwidth Support (Using ICT)
- 4K60 (4:4:4)
- 12-bit Support
- Full HDR (HDR, HDR10+, and HLG) and Dolby Vision Support
- HDCP 2.2 & Earlier Supported
- EDID Management and EDID emulate
- L/R Audio Extraction on Tx
- CEC Pass Through
- 3D Support
- Ultra Slim (.47 inch/12mm)
- Bidirectional RS232 Transport
- LED Status, Link, Power indication lights
- 100M (330ft) 0n 1080P, Up to 70m (230ft) on 4K (Cat6a)
- Bi-Directional POE (ire)
- Rugged, long-life chassis
- RS232 Control form local or remote
- Single UTP/STP LAN cable (CAT-5E/6A) for all signals (Shielded Cat6 recommended)
- ESD protection circuitry (Inputs / Outputs) till 7KV.
- Transfer IR & RS-232 signals from Tx to Rx
- I-Pass Feature for control system “pass-through IR”
- 3-20v protection circuit built-in for safe IR transport
- Compatible with HBase displays, projectors, AVR’s
- Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby Trued, DTS HDMaster Audio, Atmos.
www.avproedge.com
[email protected]
877-886-5112 or +1 605 274 6055