FLAMMA FC16 Optical Tremolo Pedal Owner’s Manual
- June 9, 2024
- FLAMMA
Table of Contents
FLAMMA FC16 Optical Tremolo Pedal
Precautions
Please read carefully before proceeding/ Power Supply
Please connect the designated adapter to an AC outlet of the correct voltage,
Please be sure
the adapter supplies 9V DC,center negative. Unplug the adapter when not in use
or during
electrical storms. Use only the original power supply.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instruction s.
- Do not use this ap paratus near water.
- Clean only with a dry cloth.
- Do not install near any ven tilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparati (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade of the third prong are provided for your safety. If the provided plug does not fit into youroutlet consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being wal ked on or pinched particularly at plugs, convenience receptacles, and the point
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Features
- Classic optical tremolo effect with huge range of speeds and depths
- BIAS knob brings various color of the tremolo sound
- Compact size with metal shell
- True bypass circuit
Layout
- Footswitch: Press to turn on or off the pedal.
- LED Indicator: Indicates the On or Off status of the pedal.
- DCIN: For connecting to power supply.
- INPUT: 1/4″ mono audio jack.
- OUTPUT: 1/4″ mono audio jack.
- DEPTH: Rotate to adjust the depth of tremolo.
- BIAS: Rotate to adjust the bias of optical tremolo unit. Rotate clockwise to crackdown the signal; rotate counterclockwise to loosen the signal.
- SPEED: Rotate to adjust the speed of tremolo.
Specifications
- INPUT: 1/4″ mono audio jack (impedance value: 1M ohms)
- OUTPUT: 1/4″ mono audio jack (impedance value: 1lk ohms)
- Power Requirements: 9V DC (center negative)
- Current Draw: 5mA
- Dimensions: 47mm (D) x 83mm (W) x 52mm (H)
- Weight: 160g
- Accessories: Owner’ s manual
ADDRESS: Shenzhen Flamma Innovation Co., Ltd
www.flammainnovation.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>