FLAMMA SIDE W PRO Side Panel with Crystal Window Instruction Manual
- June 8, 2024
- FLAMMA
Table of Contents
Side panel with Crystal window
Installation and usage instructions
SIDE W SIDE W PRO
SIDE W CARAVANSTORE / XL
Fiammaster
Standard for:
Side W Pro Van
(item No. 07977A01-)
Side W Pro Caravanstore
(item No. 07977-01-)
Side W Pro Caravanstore XL
(item No. 07977B01-)| Standard for:
Side W Caravanstore
(item No. 07978-01-)
Side W Caravanstore XL
(item No. 07978A01-)
---|---
| | A| B|
---|---|---|---|---
SIDE W CARAVANSTORE / F35| 07978-01-| 210 cm| 240/260 cm| 3,9 kg
SIDE W CARAVANSTORE XL| 07978A01-| 240 cm| 240/260 cm| 4,2 kg
SIDE W PRO F35 VAN| 07977A01-| 210 cm| 180/220 cm| 4,2 kg
SIDE W PRO CARAVANSTORE / F35| 07977-01-| 210 cm| 240/260 cm| 4,5 kg
SIDE W PRO CARAVANSTORE XL| 07977B01-| 240 cm| 240/260 cm| 4,8 kg
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or
limitations of the product, contact the dealer. We recommend that the
installation is carried out by qualifi ed personnel and in compliance with
current local regulations.
In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.
Fiamma declines all responsibility for any personal injury and damage to
property due to incorrect assembly or use of the product; it is suggested to
keep the instructions inside the vehicle.
Keep the original packaging to be used in case of return. The assembly of the
product must be carried out according to the assembly instructions: the
product must not be modifi ed in any way. All our side panels are made with an
high quality standard.
Apart from our strict quality controls, we also have our fabrics continuously
controlled by independent institutes to ensure that the fabric is tear
resistant, they can hold the weight of water, the colours don’t fade and it is
resistant against atmospheric agents. To guarantee a perfect quality, the
fabrics are waxed or laminated several times.
During this operation, single coloured pigments could move and thus create
small bright spots in the material, which are only irregularities that are
technically inevitable to avoid, but do not compromise the impermeability of
the fabric. Irregularities in weaving (such as knots and thickening) are due
to unavoidable manufacturing tolerances and are not grounds for complaint; do
not prejudice in any way the qualities of the side panels.
Especially with light fabrics, folds may form that backlight seems dark.
They are irregularities of technically unavoidable materials due to the specifi
c workings.
MAINTENANCE INSTRUCTIONS
Store the side panel only if it is dry and possibly clean. The remaining
humidity could cause stains. If you are forced to close it when is still wet,
after max. 12 hours reopen it to make it dry.
Most of the dirt is superfi cial and can be removed with clean water and a
cloth or a brush.
If the fabric is very dirty, add some light cleaning detergent (Marseille
soap). Any residual detergent on the fabric must be carefully rinsed. Be aware
never to use any aggressive chemical substances and never to clean the fabric
with a high pressure machine. Windows in transparent PVC: don’t use detergents
which contain alcohol or solvents. Wash it only with hot water and soft cloth.
Zippers: Subjected to continuous stress and wear. Open and close gently
and slowly without tearing, avoiding excessive effort during fi xing to the
ground. Keep them sliding using a normal zipper spray.
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.