FLAMMA FS05 Multi Types Modulation Pedal Owner’s Manual

: June 6, 2024
: FLAMMA

Table of Contents

PRECAUTIONS
FCC certification
Features
Instructions
Effect List
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FS05 Multi Types Modulation Pedal
Owner’s Manual

PRECAUTIONS

Please read carefully before proceeding
Power Supply

Please connect the designated adapter to an AC outlet of the correct voltage, Please be sure the adapter supplies DC 9v 300mA, center negative. Unplug the adapter when not in use or during electrical storms

Important Safety Instructions

Read these instructions
Keep these instructions
Heed all warnings
Follow all instructions
Do not use this apparatus near water
Clean only with a dry cloth
Do not install near any ventilation openings. Install in accordance with the manufacturer’s instructions
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation

Features

High-quality stereo modulation effects
11 typical modulation effects cover a wide variety of guitar tones
7 preset slots for saving your favorite setting
True bypass
DC 9V: Connect to the power supply (Central negative)
INPUT L (MONO): 1/4″ mono unbalanced input jack (For mono connection please use this input)
INPUT R: 1/4″ mono unbalanced input jack
OUTPUT L (MONO):1/4″ mono unbalanced output jack (For mono connection, please use this output)
OUTPUT R: 1/4″ mono unbalanced output
Rate: Rotate to adjust the rate of effect
**TYPE:** Rotate to switch between 11 different effects
DEPTH: Rotate to adjust the depth of effects
CTRL 1: Parameter 1 adjustment
CTRL 2: Parameter 2 adjustment
SAVE/PRESET: Press to switch between 7 different preset patches. Press and hold to store the currently selected patch setting
1-7 indicator: Indicates currently selected preset patch. Different preset patches indicated by different color
Footswitch LED: Power indicator for FS05
Footswitch: Toggle FS05 on/off

Instructions

Switch presets
Press the SAVE/SELECT button to switch between the 7 different reverb effects. LED indicates the currently selected effect (see manual for a full description of effects).
Save presets
When any parameter is changed that is different from the saved preset parameters, the LED indicator will blink slowly indicating the change has not yet been saved. Press and hold the SAVE button to save current settings. The LED will blink swiftly, indicating the preset has been saved successfully. Pressing the SAVE button once quickly will change to the next effect without saving.
Factory reset
To reset the pedal to factory settings, first power off the pedal. Next, press and hold the SAVE button while powering the pedal back on. The 7 LED indicators will begin to blink. Release the SAVE button LED, then wait until the indicators stop blinking to complete the factory reset. You can cancel the reset by unplugging the power supply before releasing the SAVE button.

Effect List

Number	Name	Effect	CTRL 1	CTRL 2
1	CHORUS	Clear natural stereo chorus effect with a wide frequency
range	MIX	TONE
2	FLANGER	Fat stereo flanger effect	MIX	FEEDBACK
3	TREMOLO	Tremolo effect based on the triangle wave	DUTY

Specifications

Input: 21/4″ mono audio jack (Impedance value: 4.7M ohms)
Output: 21/4″ mono audio jack (Impedance value: 100 ohms)
Power supply: 9V DC (Negative inside. Please ensure the polarity of power supply is correct. Voltage value should be 9V exactly.)
Current Draw: 300mA
Dimension: 69.82×121.5×50.65mm
Weight: 0.298KG
Accessories: Safety Instruction & Warranty Card, Sticker, quick guide