FLAMMA FC20 DistortionPedal Owner’s Manual
- June 4, 2024
- FLAMMA
Table of Contents
FC20 DistortionPedal
Owner’s Manual
Precautions
Please read carefully before proceeding
Power Supply
Please connect the designated adapter to an AC outlet of the correct voltage,
Please be sure the adapter supplies 9V DC, center negative. Unplug the adapter
when not in use or during electrical storms. Use only the original power
supply.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not install near any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade of the third prong is provided for your safety. If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Features
- High gain distortion effect with adjustable mid-frequency control
- Compact size with metal shell
- True bypass circuit
Layout
1. Footswitch: Press to turn on or off the pedal.| 5. OUTPUT: 1/4″ mono
audio jack
---|---
2. LED Indicator: Indicates the On or Off status of the pedal.| 6. VOLUME:
Rotate to adjust the volume level of distortion.
3. DC IN: For connecting to the power supply.| 7. TONE: Rotate to adjust the
tone color of distortion.
4. INPUT: 1/4″ mono audio jack| 8. GAIN: Rotate to adjust the gain level of
distortion.
Specifications
INPUT: 1/4″ mono audio jack (impedance value: 1M ohms)
OUTPUT: 1/4″ mono audio jack (impedance value: 1k ohms)
Power Requirements: 9V DC (center negative)
Current Draw: 7mA
Dimensions: 93.5mm (D) x 42mm (W) x 52mm (H)
Weight: 160g
Accessories: Owner’s manual
www.flammainnovation.com
Shenzhen Flamma Innovation Co., Ltd
Made in China