CORNAT KSDSC310 WC Seat Hologram Howling Wolf User Manual
- June 9, 2024
- CORNAT
Table of Contents
The illustrations serve as visual depictions. Product changes are possible. Subject to change.
Assembly instructions
Check the completeness of the hardware kit.
| Mounting | Mounting steps |
|---|---|
Mounting steps:
- Check which dowel diameter fits into the toilet seat mounting holes of the ceramic.
- You can choose outer diameter (OD) 13 and 15 mm.
- Screw the threaded rod firmly into the bottom of the hinge plate.
- Slide the white plastic seal with the smooth side towards the ceramic onto the threaded rod.
- Slide the first spherical washer with the wide side, pointing to the plastic seal, on the threaded rod.
- Slide the appropriate plug on the threaded rod.
- Insert the threaded rod with spherical washer and dowels into the mounting hole and then into the ceramic.
- Now slide the bottom of the second spherical washer, showing the narrow side towards ceramics, on the threaded rod.
- Afterwards screw the mounting nut and tighten them finger tight.
- Making sure that the anchor is in the mounting hole of the ceramic.
- Tighten the nut with the supplied wrench so tight that it can not be rotated with moderate force.
Check the individual assembly steps in the illustrations too (above in box).
Care
| | | | | | | | | | | | | | | | | | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
Batch number
TS
TS
Conmetall Meister GmbH • Hafenstraße 26 • 29223 Celle • GERMANY •
www.conmetallmeister.de
06/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>