CORNAT SA842 Single-Lever Shower Mixer Instruction Manual
- June 12, 2024
- CORNAT
Table of Contents
SA842
Instruction-manual The illustrations serve as visual depictions
SA842 Single-Lever Shower Mixer
Please note the following points before installation:
- Installation should only be performed by experienced technicians under the consideration of DIN1988 and VOB.
- Before starting the installation, please stop the water supply (ideally close the main valve at the water meter).
- Please make sure that during assembly all seals fit properly (Always check – water damage possible)
- The fitting is suitable for use in private households and only in rooms with a temperature above 0 ° C. If there are a risk of frost, the water supply should be interrupted and the valve must be completely emptied.
- Always before the first use and when a fitting has not been used for a prolonged period, you should let rinse out a larger amount of water (water stagnation) before drinking water is taken!
- Important MOUNTING Note:
The flexible connection hoses may only be hand screwed into the fitting. Do not use under any circumstances tools like pliers or wrenches.
Operating conditions:
| Hot water temperature | max. 80 ° Celsius |
|---|---|
| Test pressure | max. 16 bar |
| Operating pressure | max. 10 bar |
| Holding pressure for shower conversion | min. 0.8 bar |
(To keep noise level DIN 4109 pressure reducers have to be installed in the
main line for pressures of more than 6 bar).
Reserve technical changes.
Sanitary taps require special care. Please note the following information:
Chrome surfaces: are sensitive for chemicals, acid-containing cleaning
supplies and all kinds of abrasives.
Occasionally clean with soapy water, using a soft cloth. Remove lime deposits
with household vinegar.
Gilded surfaces:
are particularly sensitive to abrasives.
Clean as chrome surfaces. Light polishing with a silver polishing cloth
brightens.
Colored surfaces:
The surfaces of these taps are sealed with a special baking varnish. Do not
clean with abrasive, corrosive or cleaners containing alcohol.
Clean only with cold water and a soft cloth or leather.
Surface damages can be expected especially in gilded and colored fittings for
inobservance of care instructions. Warranty claims will not be asserted.
Hot Water
Cold Water The illustrations serve as visual depictions. Product changes
are possible. Subject to change.
One must observe that the tap is level when mounting and not tilted.
The mounting should be done by a professional personal with regards to the
DIN1988.
Sealing element:
Batch number: YA
Conmetall Meister GmbH
HafenstraBe 26
29223 Celle
GERMANY
www.conmetallmeister.de
Documents / Resources
|
CORNAT SA842 Single-Lever Shower
Mixer
[pdf] Instruction Manual
SA842 Single-Lever Shower Mixer, SA842, Single-Lever Shower Mixer, Lever
Shower Mixer, Shower Mixer, Mixer
---|---