Soundcore Liberty Air 2 Manual: Learn How to Pair & Control Your Earbuds
- June 8, 2024
- Soundcore
Table of Contents
The Soundcore Liberty Air 2 earbuds are a high-quality audio product designed for ultimate sound experience and convenience. To ensure optimal usage, it is important to understand the various features and controls of the earbuds. This user manual provides detailed instructions on how to charge the earbuds and the charging case, how to power them on and off, and how to pair them with your device. Additionally, it explains how to customize controls in stereo mode and use the Soundcore App for HearID, UI customization, EQ settings, and firmware updates. The manual also includes instructions on how to reset the earbuds if necessary. Furthermore, it provides technical specifications for the product, including details on the Qualcomm aptX technology used in the earbuds. By following these instructions, users can maximize their experience with the Soundcore Liberty Air 2 earbuds and enjoy high-quality audio in any situation.
Soundcore Liberty Air 2
USER MANUAL
Charging
- Open or close the charging case to activate the LED battery indicator.
- Fully charge both the earbuds and the charging case before the first-time using.
- To prevent damage, use the provided USB-C cable.
- You can charge the charging case by using a certified wireless charger (not provided).
- Fully dry off the earbuds and the USB port before charging.
Powering On/Off
Open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will automatically power off.
- To manually power on, tap and hold the touchpad on either one of earbuds for 2 seconds until the LED indicator flashes white once.
- To manually power off, tap and hold touchpad on either one of earbuds for 8 seconds until the LED indicator flashes red once.
Pairing
True Wireless Stereo Connection
Open the charging case, the earbuds will automatically power on. The right earbud will automatically connect with the left earbud.
LED behaviour (Earbuds)
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when TWS connected or when powered on in mono mode. You are requested to confirm the connection when you see a pop-out screen.
LED behaviour (Earbuds)
- In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you tap “Pair” or even no screen popped out. Don’t worry and keep using.
- Once successfully paired, the primary earbud connects with your device and transfers signal to the secondary earbud, the latter one will not connect with your device. As a result, in the Bluetooth pairing list on your device, it may indicate that only one side is connected while the other side is not.
To pair with another Bluetooth device, place the earbuds back into the charging case and make sure they are being charged, keep the cover open, then press and hold the button on the bottom of the charging case for 3 seconds until the LED indicators on earbuds flash white rapidly.
- Each time you power on your Soundcore earphones, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
- Mono mode: When Bluetooth connected, you can use either one of the earbuds only by putting the other one back into the charging case and closing the cover.
Wearing
- Choose the ear tips that fit your ears the best.
- Insert the earbuds into the inner canal of your ears.
- Turn and find the most comfortable position.
Controls
All of the controls in stereo mode can be customized in the Soundcore App.
Mono mode (controls in mono mode cannot be customized in the App)
Soundcore App
Make sure the earbuds firmware is always the most updated before using.
Download the Soundcore App for HearID, UI customization, EQ settings and earbuds firmware update.
- HearID: HearID maps your personal hearing sensitivity at multiple frequencies and analyzes the results. It tailors the EQ settings and creates a personalized sound profile for you.
- UI customization: In stereo mode, all of the controls can be customized in the App. In mono mode, the controls are fixed.
- EQ settings: There’re more than 20 EQ settings you can choose in the App to optimize your experience while enjoying different music genres.
- Earbuds firmware update: The earbuds firmware can be updated in the App. You will be informed once the new version of firmware is detected when you connect the earbuds with the App.
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect with your device properly.
- Place the earbuds into the charging case and make sure they are being charged.
- Keep the charging case open, then press and hold the button on the bottom of the charging case for 10 seconds until the LED indicators on both earbuds flash red 3 times.
- All the memory data will be cleared.
Specifications
Specifications are subject to change without notice.
- Qualcomm®aptX ™ Technical specifications
- Compression ratio: 4:1
- Word Depth: Support 16 bit and 24bit
- Decoding delay: Sample Rate 48kHZ<2ms
- Dynamic range: 16bit>92dB, 24bit>120dB
- Data rates: 352kbps
- Decode mode: Stereo
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International Ltd., registered in the United States and other countries.
FAQS
How do I charge the Soundcore Liberty Air 2 earbuds and charging case?
Open or close the charging case to activate the LED battery indicator. Fully charge both the earbuds and the charging case before the first-time using. To prevent damage, use the provided USB-C cable. You can charge the charging case by using a certified wireless charger (not provided). Fully dry off the earbuds and the USB port before charging.
How do I power on/off the Soundcore Liberty Air 2 earbuds?
Open the charging case, the earbuds will automatically power on. Place the earbuds back into the charging case and close the case, the earbuds will automatically power off. To manually power on, tap and hold the touchpad on either one of earbuds for 2 seconds until the LED indicator flashes white once. To manually power off, tap and hold touchpad on either one of earbuds for 8 seconds until the LED indicator flashes red once.
How do I pair my Soundcore Liberty Air 2 earbuds with my device?
Open the charging case, the earbuds will automatically power on. The right earbud will automatically connect with the left earbud. The earbuds will enter pairing mode when TWS connected or when powered on in mono mode. You are requested to confirm the connection when you see a pop-out screen. To pair with another Bluetooth device, place the earbuds back into the charging case and make sure they are being charged, keep the cover open, then press and hold the button on the bottom of the charging case for 3 seconds until the LED indicators on earbuds flash white rapidly.
How do I customize controls in stereo mode?
All of the controls in stereo mode can be customized in the Soundcore App.
How do I use the Soundcore App for HearID, UI customization, EQ settings, and firmware updates?
Download the Soundcore App for HearID, UI customization, EQ settings, and earbuds firmware update. HearID maps your personal hearing sensitivity at multiple frequencies and analyzes the results. It tailors the EQ settings and creates a personalized sound profile for you. In stereo mode, all of the controls can be customized in the App. In mono mode, the controls are fixed. There’re more than 20 EQ settings you can choose in the App to optimize your experience while enjoying different music genres. The earbuds firmware can be updated in the App. You will be informed once the new version of firmware is detected when you connect the earbuds with the App.
How do I reset my Soundcore Liberty Air 2 earbuds?
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect with your device properly. Place the earbuds into the charging case and make sure they are being charged. Keep the charging case open, then press and hold the button on the bottom of the charging case for 10 seconds until the LED indicators on both earbuds flash red 3 times. All the memory data will be cleared.
What are the technical specifications for the Soundcore Liberty Air 2 earbuds?
The technical specifications include details on the Qualcomm aptX technology used in the earbuds. Compression ratio: 4:1, Word Depth: Support 16 bit and 24bit, Decoding delay: Sample Rate 48kHZ<2ms, Dynamic range: 16bit>92dB, 24bit>120dB, Data rates: 352kbps, Decode mode: Stereo.
Soundcore Liberty Air 2 User Manual – Optimized PDF
Soundcore Liberty Air 2 User Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>