Micro RX800-PRO Digital Receiver User Manual

RX800 PRO:  2.4GHZ DIGITAL RECEIVER USER MANUAL

COMPATIBILITY

S-FHSS 2.4G air system transmitter support list as follow:

PARMETER

RX800-PRO use l ow insertion loss BPF, high performance LNA, ultra low noise 40 µV LDO, with 2 stage rx gain switch technology , make this mini receiver have excellent performance , working range 150M in open area away from building and without radio interference , other electrical specification as follow:

BIND PROCEDURE

Turn on the transmitter , power on the receiver while pressing the receiver’s key, bind procedure is completed and the receiver is working normally when green LED is solid.

FAILSAFE

Support 2
failsafe mode, press the key and hold 3 s while the receiver working normally can switch failsafe mode.
■ :After 1s when lost transmitter signal , S.BUS keep output, THR will 988us, all other channels will 1500us.
■: After 1s when lost transmitter signal , S.BUS not output, user should setting related parameters to ensure flight controller handle failsafe.