DENVER MTW-984 DVD Player Screen User Manual

September 4, 2022
Denver

USER’S MANUAL
MTW-984 TWINDENVER MTW 984 DVD Player Screen -

Important Safety Instructions

  1. Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified personnel.
  2. Warning: To prevent fire or electric shock hazards, do not expose the unit to rain or moisture.
  3. Do not expose the Adaptor and portable DVD to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the unit.
  4. Keep the portable DVD away from direct sunlight and heat sources such as radiators or stoves.
  5. Do not block the ventilation openings. Slots and openings on the unit are provided for ventilation. The openings should never be blocked by placing your portable DVD on a cushion, sofa, or another similar surface.
  6. Do not place the portable DVD on an unstable cart, stand, tripod, bracket, or table. The unit may fall, resulting in possible damage or injury.
  7. Never place heavy or sharp objects on the LCD panel or frame.
  8. Only use the AC adapter included with the portable DVD. Using any other adapter will void your warranty.
  9. The plug of the AC adaptor is used as the disconnect device, the disconnect device shall remain readily operable.
  10. Unplug the power from the outlet when the unit is not in use.
  11. WARNING: Excessive sound pressure from earphones or headphones can cause hearing loss.
  12. WARNING: Only use attachments/accessories specified provided by the manufacturer, the portable DVD is supplied by an AC adapter, the AC adapter is used as the disconnect device, and the disconnect device shall remain readily operable.

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Safety Precautions

Warning: This digital video disc player employs a laser system.
Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure.
Warning: To prevent direct exposure to the laser beam, do not open the enclosure.
Visible laser radiation when open.
Warning: Never stare directly into the laser beam.
Caution: Do not install this product in a confined space such as a bookcase or similar unit.
Warning: more than 250mm USB extension cord is prohibited to use for the USB port.

Notes on Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission.
This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs.
When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other Limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.

SERIAL NUMBER:
You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record the requested information here and retain this guide as a permanent record of your purchase.
Model No. _____
Serie No. __
Date of Purchase ____

DENVER MTW 984 DVD Player Screen - icon1

Car Installation by a mounting bracket

1. Separate the bracket by taking down the screws on both sides of the bracket.
2. Take out 4pcs screws of the long part of the bracket.| 3. Install the long part of the bracket to the steel pipe beneath the back of the seat, then lock up the screw.
---|---
|
4. Insert the other part of the bracket.| 5. Put the player to the indicated screw hole and tighten the screw.
DENVER MTW 984 DVD Player Screen - fig 3|

Car Installation with straps

  1. Fit the straps to the DVD Player / Monitor as required.
    The DVD player will fit the mount in this position, as shown below.DENVER
MTW 984 DVD Player Screen - fig 5 Turn the player around so the backs are facing you.DENVER MTW 984 DVD Player Screen -
fig 6 Turn the player around, slide the strap through the strap lock upon the right bottom of the DVD player, then slide the strap through strap B and the left bottom player as shown. Enter the strap B mounted centrally.

  2. Fitting the straps to the headrest.
    a. Fitting the straps to the headrest. Fit the straps around the headrest and engage the 2 trident clips.
    Ensure clips are securely fastened. Pull the straps tight using the adjustment.
    Tuck the loose ends into the strap tidy.

NOTE:
Be sure to complete the installation then use MTW-984 TWIN in the car.
For MTW-984 TWIN installation is recommended that the DVD Player is on the LEFT headrest, to ensure a neat cable runs to the monitor, as shown below:

DENVER MTW 984 DVD Player Screen - fig 9

Main Unit Controls

DENVER MTW 984 DVD Player Screen - fig 10

1. Open knob
2. Power ON/OFF switch
3. SETUP button
4. MODE button
5. ****
6. OK button Function same as
“ ENTER ”on the Remote control
7. Play/Pause
8. STOP button| 9. DC IN 9-12V
10. DC OUT
11. AV OUT
12. Earphone jack
13. Volume knob
14. SD card slot
15. USB Port
16. Rating Label Position
17. Bracket
---|---

Monitor View

DENVER MTW 984 DVD Player Screen - fig 11

1. Power ON/OFF
2. Volume knob
3. Earphone jack
4. AV I N| 5. DC IN 9-12V
6. Brightness Knob
7. Rating Label Position
8. Bracket
---|---

The Remote Control

DENVER MTW 984 DVD Player Screen - fig 12

1. Number button
2. TITLE ( To display title information)
3. AUDIO (To select audio language)
4. SETUP (To go to or exit the setup menu)
5. Previous/Next button (To go to previous/next chapter or scene during playing)
6. Fast forward/backward button (To scan forward/backward at 2, 4,
8, 16, or 32 times )
7. OSD ( To display disc information during playing such as elapsed and remaining time)
8.
Play/pause
9. Stop ( press once to stop playback, then press ****to resume playback from the point where you stopped; press the stop button twice to stop playback completely)| 10. MODE(To select the source)
11. ZOOM(To zoom in/out the image during the playback)
12. MENU(To enter or exit the root menu)
13. SUBTITLE(To select a subtitle language when playing a DVD disc)
14. ANGLE(To change viewing angle when playing a disc with multi-angle)
15. A-B(Repeat a specific portion from point A to B, press it again to cancel repeat playing)
16. REPEAT(To repeat playing the title, chapter, or track)
17. RETURN(To return to the main menu)
18. MUTE(To turn to mute)
19. VOL +/- (To adjust the volume)
20. ENTER(To confirm)
---|---

System Setup

Press Setup” button and the main menu will be displayed on the screen
In the General Setup Page, Press ****button to highlight this item.
Press ENTER button to access it.
Press the button to select the setting.
Press ENTER button to confirm your selection.
Press the ****
button to exit.

General Setup Page

|
---|---
TV display:
Enter this option, user can set the screen display format(4:3PS,4:3LB,16:9)
The default is 16:9
Note
The function depends on the display ratio with which the DVD disc is recorded.
Please choose Wide(16:9) when using a 16:9 wide-screen TV set.| Angle Mark:
Enter this option to set the angle during playback.
Optional setting: ON, OFF
The default is ON
|
OSD Language:
In the option, the user can set the OSD menu language to English.
The default: English| Screen Saver
Enter this option to set whether to activate the screen saver function.
The default is ON.
| Auto Standby
Enter this option to set different auto standby
time function.
The default is Off.

Video Setup Page

|
---|---
TV Type:
Enter this option to select TV type(PAL,NTSC)
The default is PAL.| Set the Video Quality of AV OUT
|
Set the Video Quality of PANEL| Audio :
Enter this option, the user can select preferred the audio language for DVDs.
Note
The audio language depends on the material on each disc.
|
Subtitle
Select your preferred language to show the subtitles on the screen.
The default is OFF| Disc Menu
This function allows you to choose the menu language stored on the disc.
Note:
the disc menu languages depend on the information available on the disc.
|
Parental :
Enter this option to set the parental control level to some unsuitable disc scenes being watched by the children.
Optional parental control levels: KID SAFE, G, PG, PG 13, PGR, R, Nc17, ADULT.
The default is ADULT.
The default password:8888.| Default :
Select this item and press the “ ENTER” button to reset.

Parameters and Specifications Electronical parameters

Item Standard Requirement
Power requirements : AC 100-240V, 50/60 Hz
Power consumption : < 9W
Operating humidity : 5% to 9 o 0/0
Output VIDEO OUT
AUDIO OUT : 1.0 Vrms (1 kHz. 0 dB)
AUDIO : Speaker: 1WX2. Earphone output

System

Laser : Semiconductor laser, wavelength 650 nm
Signal system : NTSC / PAL
Frequency response : 20Hz to 20 kHz (1dB)
Signal-to-noise ratio : More than 80 dB (ANALOG OUT connectors only)
Dynamic range : More than 80 dB (DVD / CD)

Note:
Design and specifications are subject to change prior notice.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/Swww.denver- electronics.com

electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and the environment if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
electric and electronic equipment and batteries are marked with the crossed- out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner, you make sure that the batteries are recycled in accordance with IegisIature and will not harm the environment.
AII cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from households.
additional information is available at the technical department of your city.

Please fill the blank with the model number
of this player for future reference
Imported by:
DENVER ELECTRONICS A/S
Stavneagervej 22
DK-8250 EGAA
DENMARK
www.facebook.com/denverelectronics

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals