PARKSIDE 405829 Cordless Led Work Light 12V User Manual

PARKSIDE 405829 Cordless Led Work Light 12V User Manual

CORDLESS LED WORK LIGHT 12V PTSA 12 A1

Introduction

Congratulations on the purchase of your new appliance. You have selected a high-quality product. The operating instructions are part of this product. They contain important information about safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the specified range of applications. Please also pass these operating instructions on to any future owner.

Intended use

This torch is intended for lighting up dry, poorly lit indoor areas, such as garages, cellars or attics.
The torch is not suitable for lighting rooms in houses. Any other use or modification of the torch is considered improper and involves a considerable risk of personal injury.
The manufacturer accepts no responsibility for damage(s) attributable to misuse. This appliance is not intended for commercial use. This light is intended for normal operation.

Equipment

1. Battery display LED
2. On/Off switch
3. Battery pack*
4. Release buttons
5. Control LED
6. Battery charge level indicator LED
7. High-speed battery charger*

Package contents

1 cordless LED work light 12V
1 set of operating instructions

Technical specifications

Cordless LED Work Light 12V PTSA 12 A1

**Rechargeable battery PAPK 12 A2***

**High-speed battery charger PLGK 12 A1***

INPUT

OUTPUT

• BATTERY AND CHARGER ARE NOT SUPPLIED

General power tool safety warnings

WARNING!

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to mains-operated (with power cord/mains adapter) power tools or battery-operated (cordless) power tools.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control of the appliance.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off- position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children. Do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Use and handling of the cordless electrical power tool

a) Charge a rechargeable battery unit using only the charger recommended by the manufacturer. Chargers are often designed for a particular type of rechargeable battery unit. There is the danger of fire if other types of rechargeable battery units are used.
b) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire.
c) When they are not being used, store rechargeable battery units away from paperclips, coins, keys, nails, screws or other small metal objects that could cause the contacts to be bridged. Short-circuiting the contacts of a rechargeable battery unit may result in heat damage or fire.
d) Fluids may leak out of rechargeable battery units if they are misused. If this happens, avoid contact with the fluid. If contact occurs, flush the affected area with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns.

CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable batteries.

Protect the recharge able battery from heat (for example, from continuous exposure to sunlight), fire, water and moisture. There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety instructions for battery chargers

• This appliance may be used by children aged 8 years old and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks. Do not allow children to use the appliance as a toy. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
• To avoid potential risks, if the appliance’s power cable is damaged, it must be replaced by the manufacturer, its customer service or by a qualified technician.

The charger is suitable for indoor use only.

WARNING!

• Do not operate the appliance with a damaged cable, power cord or mains plug. Damaged power cords can pose a hazard to life due to electric shock.
• Do not use any accessories that are not recommended by PARKSIDE.
  This can lead to an electric shock and fire.

CAUTION!

• This charger can only charge the following batteries: PAPK 12 A1/ PAPK 12 A2/PAPK 12 A3/PAPK 12 B1/PAPK 12 B3/PAPK 12 C1/PAPK 12 D1.
• A current list of battery compatibility can be found at www.Lidl.de/Akku.

Safety instructions for torches

• Do not cover the device during operation. The cordless LED working light heats up during operation and may cause burns.
• Do not look into the light beam. Do not direct the light beam at people or animals.
• Do not allow children to use the appliance. You could inadvertently dazzle other people or yourself.
• The light source of this appliance cannot be replaced. Once the light source has reached the end of its lifespan, the entire torch must be replaced.

Before use

Removing/charging/inserting the battery pack

CAUTION!

• Always disconnect the mains plug before removing the battery pack 3 from or inserting it into the high-speed charger 7.

NOTE

• The battery pack is supplied partially charged. Before first use, charge the battery pack 3 in the high-speed battery charger for at least 1 hour. In this way, you ensure full performance of the battery pack 3. You can charge the lithium-ion battery at any time without shortening its service life. Interrupting the charging process does not damage the battery pack 3.
• If the battery pack 3 overheats during operation, it cannot be charged. Allow it to cool down first.

■ Never charge the battery pack 3 if the ambient temperature is below 10°C or above 40°C.

1. To remove the battery pack 3 , press the release button 4 and pull the battery pack 3 out of the appliance.
2. Insert the battery pack 3 into the high-speed battery charger 7.
3. Insert the power plug into the socket. The control LED 5 lights up red .
4. The green charge level indicator LED 6 indicates that the charging process is complete and the battery pack 3 is ready for use.
5. Push the battery pack 3 into the appliance.

Using the appliance

Never use the appliance for purposes other than those for which it was designed, and only use original parts/accessories. Using attachments or accessory tools other than those recommended in the operating instructions can lead to a risk of injury.

Switching on/off

Switching on

• Press the On/Off switch 2. The appliance lights up at maximum brightness.

Switching off

• Press the On/Off switch 2.

Battery charge level

• The status will be shown on the battery display LED 1 as follows:
  RED/ORANGE/GREEN = maximum charge
  RED/ORANGE = medium charge
  RED = low charge – charge the battery

Maintenance and cleaning

WARNING! RISK OF INJURY! Always switch the appliance off and remove the battery before carrying out any work on the appliance.

• The appliance is maintenance-free.
• Remove all dirt from the appliance. Use a soft, dry cloth for this purpose.
• Do not allow any liquids to get into the appliance.

Disposal

The product and its packaging are recyclable. They are subject to an extended manufacturer responsibility and will be collected separately

Do not dispose of power tools in your normal domestic waste!

The adjacent symbol of a crossed-out dustbin means that this appliance is subject to Directive 2012/19/EU. This directive states that this appliance may not be disposed of in the normal household waste at the end of its useful life, but must be taken to specially set-up collection locations, recycling depots or disposal companies.
The disposal is free of charge for the user. Protect the environment and dispose of this appliance properly.

Your local community or municipal authorities can provide information on how to dispose of the worn-out product.

Do not dispose of batteries in your normal household waste!

Defective or worn-out rechargeable batteries must be recycled according to Directive 2006/66/EC. Batteries/rechargeable batteries must be treated as hazardous waste and must therefore be disposed of in an environmentally sound manner by appropriate bodies (dealers, specialist dealers, public municipal bodies, commercial disposal companies). Batteries/recharge able batteries may contain toxic heavy metals.

For this reason, do not dispose of batteries/rechargeable batteries in domestic waste. Take them to a specialist collection point. Only return batteries that are fully discharged.

The packaging is made from environmentally friendly material and can be disposed of at your local recycling plant.

Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings: 1–7: plastics, 20–22: paper and cardboard, 80–98: composites.

Kompernaß Handels GmbH warranty

Dear Customer,

This appliance comes with a 3-year warranty valid from the date of purchase. In the event that this product has any defects, you, the buyer, have certain statutory rights. Your statutory rights are not limited in any way by the warranty described below.

Warranty conditions

The warranty period starts on the date of purchase. Please keep your receipt in a safe place. It will be required as proof of purchase.

If any material or manufacturing fault occurs within three years of the purchase date of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and when it occurred.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not constitute the beginning of a new warranty period.

X 12 V and X 20 V Team Series battery packs come with a 3-year warranty valid from the date of purchase.

Warranty period and statutory claims for defects

Repairs carried out under the warranty do not extend the warranty period. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period are billable.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. This warranty does not cover product parts that are subject to normal wear and tear and can therefore be considered wearing parts, or damage to fragile parts such as switches or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product must be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty will be deemed void in cases of misuse or improper hand ling, use of force and modifications/repairs that have not been carried out by one of our authorised service centres.

The warranty period does not apply to

• normal reduction of the battery capacity over time
• commercial use of the product
• damage to or alteration of the product by the customer
• non-compliance with safety and maintenance instructions, operating errors
• damage caused by natural hazards

Warranty claim procedure

To ensure prompt processing of your case, please follow the following instructions:

• Please have the receipt and item number (IAN) 405829_2201 available as proof of purchase.
• You will find the item number on the type plate on the product, as an engraving on the product, on the front page of the operating instructions (below left) or as a sticker on the rear or underside of the product.
• If functional errors or other defects occur, please contact the customer service department listed below either by telephone or by e-mail.
• You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (receipt) and information about what the defect is and when it occurred.

www.lidl-service.com

You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com.

This QR code will take you directly to the Lidl Service page (www.lidl- service.com) where you can open your operating instructions by
entering the article number (IAN) 405829_2201.

WARNING!

• Have your appliances repaired by the service center or a trained electrician, using only original spare parts. This will ensure that the safety of the appliance is maintained.
• Have the power plug or the mains cable replaced only by the manufacturer of the appliance or by an approved customer service provider. This will ensure that the safety of the appliance is maintained.

NOTE

• You can order replacement parts via our service hotline.

Service

Service Great Britain
Tel.: 0800 404 7657
E-Mail: [email protected]

Service Ireland

Tel.: 1800 101010
E-Mail: [email protected]
IAN 405829_2201

Importer

Please note that the following address is not the service address.
Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

Translation of the original Conformity Declaration

We, KOMPERNASS HANDELS GMBH, document officer: Mr Semi Uguzlu, BURGSTR. 21, 44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards, normative documents and EC directives:

EMC (Electromagnetic Compatibility)

(2014/30/EU)

RoHS Directive

(2011/65/EU)*

• The manufacturer bears the sole responsibility for compliance with this conformity declaration. The subject of the declaration described above meets the requirements of Directive 2011/65/EU of the European Parliament and Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical and electronic appliances.

Applied harmonised standards

EN 60598-1:2015/A1:2018
EN 60598-2-8: 2013
EN 62493:2015
EN IEC 55015:2019/A11:2020
EN 61547:2009
EN IEC 63000:2018

Type designation of machine: Cordless LED Work Light 12V PTSA 12 A1
Year of manufacture: 06–2022
Serial number: IAN 405829_2201

Bochum, 24/02/2022

Semi Uguzlu
– Quality Manager –

We reserve the right to make technical changes in the context of further product development.

Ordering replacement batteries

If you want to order a replacement battery for your appliance, you can do so easily via the Internet on www.kompernass.com or by telephone.
Due to limited stocks, this item may sell out in a relatively short time.

NOTE

• Online ordering of replacement parts is not possible in all countries. If this is the case, please contact the Service Hotline.

Telephone ordering

Service Great Britain Tel.: 0800 404 7657
Service Ireland Tel.: 1800 101010

To ensure fast processing of your order, have the article number of your appliance (IAN 405829_2201) to hand in case of questions. The article number can be found on the type plate or the title page of these instructions.

www.lidl-service.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

Last Information Update·
02 / 2022 · Ident.-No.: PTSA12A1-022022-1

IAN 405829_2201

References

• Kompernaß - Online shop for accessories and spare parts
• de/
• LIDL lohnt sich » Top-Angebote im Onlineshop & in der Filiale

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>