Shenzhen Xiaoju Intelligent Technology G50 Smart Watch Instruction Manual
- June 6, 2024
- Shenzhen Xiaoju Intelligent Technology
Table of Contents
Instruction Manual for G50
To bring you a better experience, please read these instructions carefully.
Bind Your Device
a. Download and Install the App
Download the InxFIT App by scanning the QR code or searching in the App Store.
Note: the operating system of your mobile phone needs to meet the
following requirements:
-
Scan the QR code below to download the InxFIT App.
https://web.xiaoju-smart.com/app_install.html -
Open the App Store on your mobile phone, search for “InxFIT”, and then download the InxFIT App.
b. Binding Steps
(Note: during the binding process, InxFIT will ask you to turn on the
Bluetooth of your mobile phone and authorize InxFIT to access the GPS of your
mobile phone. For IOS users, when a binding error occurs, please ignore this
device in the Bluetooth list of your mobile phone first.)
-
On the Home page of the App, click “+” at the upper right corner and select [Add Device] to search for your watch. Find your watch in the Device List and click it to bind it.
-
On the Home page of the App, click “+” at the upper right corner and select [Scan].
Then scan the QR code that is displayed on your watch when it is turned on for the first time. If you accidentally exit the QR code page, select [Device]→[Setup]→[About] to find the QR code.
Data Synchronization
The watch records various data on your activities when it is worn on your
wrist.
You can synchronize data with the App as follows: start the InxFIT App, and
pull down the page to start a data synchronization. The synchronization
progress is displayed on the page.
Note: Please perform a data synchronization at least every 7 days, or the
data will be overwritten when the memory is full.
Instructions for Use
a. Charging Diagram
Follow the diagram below to connect and charge your watch. We recommend that
you charge your watch before turning it on for the first time.
b. Wearing and Adjustment
-
Wear Your Watch
Leave a one-finger gap between the watch and your wrist bone, and adjust the strap to a comfortable length.
-
Replace the Strap
Push the push button horizontally to loosen the strap, and then remove the strap.
Note: too loose or too tight wearing may affect the accuracy of HR or SpO2 measurement.
Operating Instructions
a. Button Operations
Press the button: return to the dial, or switch between the dial and function
list.
Press and hold the button: turn on/off the device.
b. Change the Dial
Press and hold the dial screen to display the dial selection list after
vibration. Swipe horizontally to select the desired dial, and then click it to
apply it.
c. Screen Operations
Swipe the screen to enter different interfaces as shown below.
Function Overview
-
Functions
Sports / HR / SpO2 / Sleep / Alarm Clock /
Breathing Exercise / Timer / Weather / Music Control / Stopwatch
Note: the Weather function needs to be enabled on the App. More details on the functions can be found on the App. -
Initiate an Exercise
a. To start an exercise: click the “Sports” icon → select a sport → the exercise data recording will start at the end of the countdown.
b. Control the exercise: press the side button to pause the exercise recording; press the side button again or click [Resume] on the screen to resume the exercise recording.
c. Stop the exercise: press and hold the side button to stop the exercise, or click [Stop] on the screen to stop the paused exercise.
Specifications
Model | G50 | Screen type | 1.69 inch |
---|---|---|---|
Battery capacity | 260mAh | Charging voltage | 5V |
Charging time Waterproof level | About 2 hours IP68 | Bluetooth Version Charging | |
mode | 5.0 |
Magnetic charge
Operating temperature| -20°C-45°C| Watch size| H: 249.5
W: 38. 6
D: 12.45
10S| IOS 10.0+
Andriod| Android 6.0+
Note: do not wear the device to take a bath, because high temperature or steam may damage the device.
Cleaning and Maintenance
- It is recommended to wear and clean the product as follows:
- Keep the product clean.
- Keep the product dry.
- Don’t wear the product too tightly.
Do not use detergents to clean the device. You can use soap-free detergents.
For stains that are not easy to remove, it is recommended to clean with
alcohol.
Safety and Certification (see the certificates)
The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS
Directive 2011/65/EU, and revised directive.
This device complies with Part 15 of the FCC Rules. Operation subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
****Old electrical appliances must not be disposed of together with the
residual waste, but have to be disposed of separately. The disposal at the
communal collecting point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these collecting points
or to similar collection points. With this little personal effort, you
contribute to recycling valuable raw materials and the treatment of toxic
substances.
Shenzhen XiaoJu Intelligent Technology Co., LTD
Documents / Resources
|
Shenzhen Xiaoju Intelligent Technology G50 Smart
Watch
[pdf] Instruction Manual
G50, 2AZHM-G50, 2AZHMG50, G50 Smart Watch, Smart Watch, Watch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>