FUFUandGAGA KF200054-03 6 Drawer Accent Chest with Metal Legs Installation Guide

August 10, 2024
FUFUandGAGA

FUFUandGAGA KF200054-03 6 Drawer Accent Chest with Metal Legs

Product Usage Instructions

Pre-Assembly Preparation

Before starting the assembly, ensure you have all the required tools listed in the manual. Check each screw carefully to match it with the corresponding part in the manual.

Assembly Steps

  • Step 1: Attaching Parts 1 and 4
    Insert quickfit screws (A) into part 1 as shown. Fix handle (D) to part 1 using bolts (E) as indicated.

  • Step 2: Attaching Parts 2, 3, and 4
    Attach parts 2 and 4 to part 3 using screws (C) as shown. Slide part 6 into the available slot of parts 2, 3, and 4.

  • Step 3: Installing Cam Locks and Handles
    Insert cam locks (B) into parts 2 and 4 and attach part 1. Turn cam locks clockwise to tighten.

  • Step 4: Fixing Inner Drawer Runners
    Fix the right inner drawer runner (DR) and left inner drawer\ runner (DL) using screws (F) as shown in the manual.

  • Step 5: Attaching Rails
    Fix rail (CL) and (CR) to parts 7 and 8 respectively using screws (F). Insert quickfit screw (A) into parts 7 and 8.

  • Step 6: Fixing Leg Supports and Feet
    Fix leg supports (J) to part 10 using screws (I). Rotate part 11 clockwise to leg support and fix part 12 to part 10 while adjusting the feet.

Frequently Asked Questions

  • Q: Do I need to purchase a wall attachment separately?
    A: Yes, if not included with the product, please purchase a suitable wall attachment to prevent tipping over.

  • Q: Can children climb or hang on the drawers?
    A: No, never allow children to stand, climb, or hang on drawers, doors, or shelves for safety reasons.

  • Q: Can a TV be placed on this product?
    A: No, never put a TV on this product as it is not designed to support the weight of a television.

IMPORTANT INFORMATION!

please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.

AVOID SCRATCHES

In order to avoid scratching this furniture should be assembled on a soft layer-could be a rug.

IMPROVE EFFICIENCY

Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time

ANTI-TOPPLE WARNING!
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fit your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT!

Any product which is assembled using any kind of screw must be re-tightened 2 weeks after assembly,and once every 3 months – to assure stability throughout the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

TOOLS REQUIRED

Please prepare the following tools
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size

AWARNING
Children have died from furniture tip-overs. To reduce the risk of furniture tip-over:

  • ALWAYS install the Anti-tip device provided
  • NEVER put a TV on this product.
  • NEVER allow children to stand, climb
  • NEVER open more tongue salves. at a time.
  • Place the heaviest items in the lowest drawers.
  • This is a permanent label.
  • Do not remove it!

PARTS

ASSEMBLED BY 2 ADULTS

INSTALLATION

  1. Insert quickfit screws (A) to part 1 , as shown.
    Fix handle (D) to part 1 using bolts (E), as shown.

  2. Attach parts 2 and 4 to part 3 using screws (C), as shown.
    Slide part 6 into the available slot of parts 2, 3, and 4, as shown.

  3. Insert cam locks (B) to parts 2 and 4 and attach part 1, as shown.
    Turn cam locks clockwise to tighten.

  4. Fix the right inner drawer runner (DR) and left inner drawer runner ( DL) to assemble unit using screws (F), as shown.

  5. Fix rail (CL) and (CR) to part 7 and 8 respectively using screw (F) as shown. Insert quickfit screw (A) into part 7 and 8 as shown.

  6. Fix rail (CR) to part 9 using screw (F) and insert quickfit screw (A) into at first.
    Flip the part to back, fix rail (CL) and insert quickfit screw (A) as well.

  7. Fix leg supports (J) to part 10 using screws (I), as shown.

  8. Fix 11 by rotating clockwise to leg support as shown.
    Fix 12 to part 10 and adjust feet(I) to leg 12 as shown.

  9. Attach part 13 to part 9 using Long wooden dowel (V), insert cam lock (B) and turn clockwise to tighten as shown.

  10. Fix part 16 to part 9 using screw (C) as shown.

  11. Attach another part 13 to part 9, turn cam lock (B) to tighten.
    Insert Short wooden dowel (M) into one part 13 at first. Attach part 8 to part 13 and 16, turn cam lock (B) to tighten as shown.

  12. Insert Short wooden dowel (M) into another part 13 at first.
    Attach part 7 to part 13 and 16, turn cam lock (B) to tighten as shown.

  13. Insert screws (A) into part 14 as shown.

  14. Cover part 14 to the top using a wooden dowel (M), and turn cam lock (B) to tighten as shown.

  15. Insert wooden dowels (M) into the assembled unit, as shown.
    Attach part 10 into the assembled unit using screws (C), as shown.

  16. Fix parts 15 using screw (N) and square washers (O) into the assembled unit, as shown.

  17. The drawer slides must be aligned with the internal rails, otherwise the drawer will tilt.

  18. For extra stability, it is recommended that you fix your drawer to the wall using the additional hardware (C, T, R,P, and Q), as shown.
    Should you choose not to affix the product to the wall, serious injury may be caused if the product tips over.
    Please note: the maximum recommended weight for this is 5kg by drawer and 30kg in total. Please spread the load evenly between the shelf and drawer.
    Your chest of 6 drawers is ready for use.

WARRANTY

WARRANTY CLAIMS

  • There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
  • Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
  • The product must be used by the instructions provided. For health reasons.
  • For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

  • Failure to follow the furniture instructions will invalidate the warranty. Attention please.
  • Does not include damage during installation, but includes damage during transportation.

Scope of responsibility

  • Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
  • After using, the damage and scratches of the furniture are not covered by the warranty.

The Warranty Relates to All Bought in The Us and Covers The Following Areas

  • The Warranty Relates to All Bought in The Us and Covers The Following Areas

RETURNS

CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

  • If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.

DEFECTIVE ITEMS

  • If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.

DAMAGED ITEMS

  • If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
    In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.

AFTER-SALES CONTACT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals